RCA IP160/060 - Manuals

RCA IP160/060 – Manual in PDF format online.

Manuals:

Manual

Manual RCA IP160/060

Summary

Page 2 - Interference Information; FCC RF Radiation Exposure Statement

23 Interference Information This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference; and (2) This device must accept any interference received, including interference that may cause undesired operati...

Page 3 - Table of Contents

2 3 3 Table of Contents Getting Started 7 Packing List 7 Setup the base 7 Setup the handset 8 Registration 8 SIP account Configuration 9 Base Web interface 10 Get the base IP address 10 Input SIP account information via web interface 10 Handset menu 11 Overview 11 Base 11 Handset 12 Handset keys lay...

Page 4 - Packing List; The following components are included in your package:; Setup the base; with the Ethernet cable to access the internet.; Getting Started

45 Packing List The following components are included in your package: IP DECT GatewayIP160 DECT HandsetHandset Belt ClipCharging CradleAC Adaptor (6V, 0.5A) for Charging Cradle AC Adaptor (5V, 0.5A) for gateway1.5M Ethernet Cable (Cat 5)Quick Setup Guide2 x AAA rechargeable Ni-MH batteries Setup th...

Page 5 - Setup the handset; Connecting the charging cradle; Battery installation; Install the 2 AAA rechargeable Ni-MH batteries to the handset.; Charging the batteries

5 The IP address of the base is assigned dynamically by default. Make sure the router’s DHCP server is on. When the base is powered up, the amber led will be amber colored. Once the net- address, the amber led will light up again. Setup the handset Connecting the charging cradle 1. Plug the adaptor ...

Page 6 - Registration

67 Registration On the base: 1. Hold down the page key on the back of the base.2. After the button is held down for five seconds, the amber led begins blinking amber and blue. The page key can now be released. The base is now in registration mode. On the handset: 1. If the handset has not registered...

Page 7 - SIP account Configuration; Base Web interface; Retrieving the base IP address

6 7 7 SIP account Configuration The SIP account can be configured through IP DECT base web interface or handset menu. Base Web interface Retrieving the base IP address In order to access the web interface of the base, the IP address is required.This information can be obtained from a properly regist...

Page 8 - and receive VOIP calls.; Handset menu; On the handset, go to menu “Settings

89 Enter display name, user id, password, SIP Server and Outbound Proxy server of the SIP account. Check the Active field to Enable/Disable. Press the “Save” button to confirm. If the SIP settings are configured correctly, the handset will now be able to make and receive VOIP calls. Handset menu On ...

Page 9 - Overview; Base; LED status

8 9 9 Overview Base Functions of registration/paging button on the base. The registration/paging button is located at the right hand side of the gateway.When the gateway is powered up, the status LED will be on and in amber color for 5 secs. After the initialization, the led status indicators are as...

Page 10 - Handset; Key

10 11 Handset Handset key layout Functions of Key on the handset Key Function Left Soft Key Perform the contextual operation as shown on the left side of current display Right Soft Key Perform the contextual operation as shown on the right side of current display Talk On/Speaker Phone Key When the p...

Page 12 - Master Handset; Handset Menu tree; Main Menu

12 13 Master Handset When a SIP account is created on the gateway through handset menu, the hand- set will be set as the master headset of the SIP account. Users of this handset can configure the settings in base related to the SIP account through the menu on the master handset. The administrator ca...

Page 15 - General Settings; Phone status; Volume control; Ringer Volume; Basic Call functions; Making calls; Making an external call

14 15 15 General Settings Phone status Enter “Status” menu. Select item “SIP Account Status” to view the associated SIP accounts status (registered/disabled). Select item “Network Status” to view the base network information. This includes base network type, IP Address, subnet mask, default gateway ...

Page 16 - Incoming calls

16 17 To make an external call through default line: Enter the number/IP address in pre-dialing page or select a record in phonebook/call log list. Then press the Talk On key or OK key. The default outgoing line will be selected automatically for the call making. To select line before making an exte...

Page 17 - Call Forward; Call log; Accessing call logs; During an active call; Mute

16 17 17 Call Forward On the master handset, Enter “Services” [ “Call Forward” menu. Highlight the SIP account to enable/disable call forward. Use left and right navigation keys to highlight the call forward options. There are 3 types of call forwarding options: 1) Call forwarding unconditional - Wh...

Page 18 - Contacts; Handset Registration

18 19 Call Waiting When there is a call waiting, you can -press “Accept” soft key to answer the call waiting and put the current call on hold. -press “Reject” soft key to reject the call. Call Transfer During a conversation with an external call, users can press the “Transfer” soft key, then enter c...

Page 19 - Account Settings; “VOIP Account Setup”; View SIP Account Status:; “SIP Account Status”.; Network Settings; “Network Settings”; Maintenance Tasks; User Levels

18 19 19 Account Settings SIP Account Setup: Users can setup SIP Accounts on the base through the handset.On the handset, go to the menu “Settings” [ “VOIP Account Setup” View SIP Account Status: Users can view the status of the accounts which are associated with the handset.On the handset, go to th...

Page 20 - Firmware upgrade; Handset Keys configuration; Web Interface

20 21 Base: Hold down the page key for 10 seconds. Then release the key. Press the key again. The settings in base will go back to factory default. Firmware upgrade Handset: Go to the menu “System” [ “Firmware Upgrade”. The phone will check the avail- ability of new software version. If new firmware...

Page 21 - Service; Manager, Consumer Relations

20 21 21 Service If trouble is experienced with this equipment, for repair or warranty information, please contact customer service at 1-800-511-3180. If the equipment is causing harm to the telephone network, the telephone company may request that you disconnect the equipment until the problem is r...