RCA HDLP61 - Manuals - manualsarea.com

Page 2 - VCR required for recording; WARNING; as vases, shall be placed on the apparatus.; Product Registration; Important Information

This symbol indicates"dangerous voltage" insidethe product that presents arisk of electric shock orpersonal injury. VCR Plus+, C 3, PlusCode, G-LINK, and GUIDE Plus+ are trademarks of Gemstar-TV Guide International, Inc. and/or its related affiliates. Patent 6,331,877; 6,239,794; 6,154,203; ...

Page 3 - DLPTM—brilliance in color, design, and technology; How DLPTM Works

1 Introduction Thank you for choosing RCA Scenium Congratulations on purchasing this RCA Scenium High Definition Television (HDTV) featuring DLP™(Digital Light Processing™) technology—a true viewing experience. Your purchase decision represents aninvestment in a new generation of technology— DLP™ an...

Page 4 - Introduction; Aspect Ratio; Total Scan Lines

2 Introduction Part 2: Why RCA Scenium DLP™ is better? DLP™ is just part of the story. You have chosen to embark on the next generation of TV viewing— HDTV. There are manytechnological advancements that make HDTV better than analog TV, but there are basically three things about HDTV thatbring you a ...

Page 5 - Digital Signal and Sound; Part 3: Other Key Features of owning an RCA Scenium HDTV; Integrated HDTV Tuner with QAM

3 Introduction Digital Signal and Sound The analog television broadcast system that has been used in the United States for the past 50 years transmits signals aselectronic waves. These waves can suffer degradation as the signal travels to your home. Additionally, the analog waves aresusceptible to i...

Page 6 - FireWire® with Two-Way DTVLink®; NetConnect

4 Introduction FireWire® with Two-Way DTVLink® Control your IEEE-1394 components via your HDTV! Just link them together via the 2-way DTVLink jacks and you cannetwork your high-speed compatible 1394 digital components. The two-way jacks allow the audio and video signals to flowinto and out from the ...

Page 7 - Table of Contents

5 Table of Contents Introduction Key Features Overview ................................................................................................................... 1 Chapter 1: Connections & Setup Things to Consider Before You Connect .........................................................

Page 8 - Chapter 4: Using the TV’s Menu System

6 Table of Contents Chapter 4: Using the TV’s Menu System Menus, On-screen Help, and Control Panels ............................................................................... 62Picture Quality Menu ....................................................................................................

Page 9 - Chapter 1

Graphics contained within this publication are for representation only. 7 Chapter 1 Connections & Setup Chapter Overview: • Things to Consider Before You Connect • Choose Your Connection • How To Connect • Explanation of Input Jacks and Cables • Back of the TV • Why You Should Connect the G-LINK...

Page 10 - Things to Consider Before You Connect; Don’t stack components.

Connections & Setup 8 Chapter 1 Things to Consider Before You Connect Protect Against Power Surges • Connect all components before you plug any of their power cords into the wall outlet or power strip. NEVER plugyour TV into an outlet that is controlled by a wall switch. • Turn off the TV and/or...

Page 11 - Choose Your Connection; VCR; TV; Components; DVD; TV; Router; Computer; TV; Video Connections; TV

Connections & Setup Chapter 1 9 Choose Your Connection There are several ways to connect your HDTV, depending on the components you want to connect and the quality of thesignal you want to achieve. Please use the following chart to determine which connection is best for you. Proceed to theapprop...

Page 12 - Connect your cable or off-air signal to ANTENNA A.; Connect the DVD player’s component (Y P; Connect your VCR to your TV.; Viewing the Components; Press the TV button on the remote control.

Connections & Setup 10 Chapter 1 How to Connect: TV + VCR + DVD Player 1. Connect your cable or off-air signal to ANTENNA A. If you have cable and an off-air antenna, connect the cable signal to ANTENNA A INPUT (antenna A is the only sourcefor the GUIDE Plus+ system). Connect the off-air antenna...

Page 13 - Satellite

Connections & Setup Chapter 1 11 How to Connect: TV + Satellite Receiver + VCR 1. Connect your cable or off-air signal to ANTENNA A. If you have cable and an off-air antenna, connect the cable signal to ANTENNA A INPUT (antenna A is the only sourcefor the GUIDE Plus+ system). Connect the off-air...

Page 14 - OR

Connections & Setup 12 Chapter 1 Audio Connections With the audio versatility of your HDTV, you can choose various connection options depending on the type and qualityof sound that you want. Choose one of the options or refer to the user’s manual of each component that you areconnecting to get t...

Page 16 - Audio

Connections & Setup 14 Chapter 1 R L LEFT EXT SPEAKER SELECT RIGHT FIXED/VARIABLE AUDIO OUTPUT EXTERNAL SPEAKERS INT W/ EXT SURR VIDEO I N P U T 1 AUDIO I N P U T 1 L/ MONO R VIDEO I N P U T 2 AUDIO I N P U T 2 S-VIDEO S-VIDEO VIDEO I N P U T 3 AUDIO I N P U T 3 V L/ MONO R V L/ MONO R V P B Y P...

Page 17 - How to Connect: TV + Router via the HDTV’s ETHERNET Jack; A router with DHCP capability is recommended.

Connections & Setup Chapter 1 15 How to Connect: TV + Router via the HDTV’s ETHERNET Jack The illustration above provides you with a general connection to the TV’s ETHERNET jack so you can maximize yourHDTV’s browser to surf the Internet. You don’t need to connect a computer to the router to sur...

Page 19 - HD Set Top Box

Connections & Setup Chapter 1 17 How to Connect: TV + Set-top Box Using DVI-HDTV (Digital Visual Interface) Digital Visual Interface is a specification created by the Digital Display Working Group to supportanalog and digital signals on a single interface. This uncompressed digital video interfa...

Page 20 - Explanation of Input Jacks and Cables; DTVLink® (Digital Television Link) Connectors; Digital Audio Out Jack and Optical Cable; Ethernet Jack and Cable

Connections & Setup 18 Chapter 1 ETHERNET Explanation of Input Jacks and Cables This section describes the jacks and cables you might use to make connections (cables may be ordered separately by usingthe order form on page 85). There are several ways to connect components to your TV. Different j...

Page 21 - Component Video (Y•Pb•Pr) Jacks and Cables; S-Video Jacks and Cables

Connections & Setup Chapter 1 19 Component Video (Y•Pb•Pr) Jacks and Cables The Y, Pb, Pr jacks allow you to connect a component, such as a DVD player.This connection provides excellent picture quality because the video isseparated into three signals. To ensure maximum picture quality, use three...

Page 22 - Back of the TV; AUDIO OUTPUTS; • RIGHT and LEFT EXTERNAL SPEAKER Terminals

Connections & Setup 20 Chapter 1 VIDEO I N P U T 1 AUDIO I N P U T 1 L/ MONO R VIDEO I N P U T 2 AUDIO I N P U T 2 S-VIDEO S-VIDEO VIDEO I N P U T 3 AUDIO I N P U T 3 V L/ MONO R V L/ MONO R V P B Y P R L/ MONO R VIDEO I N P U T 4 AUDIO I N P U T 4 AUDIO I N P U T 5 L/ MONO R V P B Y P R V I D E...

Page 23 - CENTER SPEAKER INPUT

Connections & Setup Chapter 1 21 CENTER SPEAKER INPUT • INTERNAL SPEAKER SOURCE - TV / EXT AMP Switch - TV Position Sound comes from TV’s internal speakers. - EXT AMP Position Internal speakers are used for an external center channel. When an external audio/video receiver’s center channeloutput ...

Page 24 - Digital Audio Out

Connections & Setup 22 Chapter 1 VIDEO INPUT 5/AUDIO INPUT 5 Provides DVI-HDTV and analog audio connections. • L/MONO AUDIO provides left audio connection and connector is usually white. • R AUDIO provides right audio connection and connector is usually red. • DVI-HDTV provides a digital video c...

Page 25 - Why You Should Connect the G-LINK Cable; Cable Box –; Placing the G-LINK Wands; How to Find the Remote Sensor; Hold the remote control (; not; the one that came with your TV, but the one that came with the

Connections & Setup Chapter 1 23 Why You Should Connect the G-LINK Cable The G-LINK cable enables the GUIDE Plus+ system (the on-screen interactive program guide) towork with your VCR and/or cable box. Cable Box – If your TV is connected to a cable box, you must connect the G-LINK cable to recei...

Page 26 - The Front of Your TV; Button Lighting; Main Menu; Front Input Jacks; Buttons on the Front of the TV; CH

Connections & Setup 24 Chapter 1 The Front of Your TV Button Lighting Your HDTV with DLP technology has a top-light feature above the buttons on the front of the TV. You can adjust thebrightness (including off) of the light through the TV’s menu system. Go to the Main Menu , highlight and select...

Page 27 - Plug in the TV; Put Batteries in the Remote; Press TV on the remote, or press POWER on the TV’s front panel.; To select the item that you’ve highlighted, press OK.

Connections & Setup Chapter 1 25 Plug in the TV Plug the flat end of the cable into the power jack on the back of the TV. Then plug the other endof the power cord into an appropriate wall outlet. Be sure to insert the plug completely. Do notplug into an outlet controlled by a light switch. Note:...

Page 28 - Complete the Assisted Setup; Set the Menu Language; The GUIDE Plus+ System Setup; Step 1: Identifying Your TV’s Location

Connections & Setup 26 Chapter 1 Tip Channel Search takes several minutes becausethe TV is searching for all possible analog anddigital channels. You may want to leave andcome back later. Tip To access the setup menus, press MENU andchoose Assisted Setup. Complete the Assisted Setup Your TV’s me...

Page 29 - Step 2: Configuring for Cable; If your TV is connected to cable, highlight

Connections & Setup Chapter 1 27 2. Use the number buttons and/or the arrows on your remote to enter yourzip code or postal code. Press OK when you’re finished. Note: If your postal code contains letters, press the up and down arrow buttons on your remote to enter letters, and press the right ar...

Page 30 - Step 3: Configuring for a VCR

Connections & Setup 28 Chapter 1 4. Highlight your brand of cable box, and press OK. If your brand isn’t listed, highlight Not Listed and press OK. Important Note: Cable box may only be connected to ANTENNA A or INPUT 1 if it is to be controlled by GUIDE Plus+ system. 5. Make sure your cable box...

Page 31 - Step 4: Confirming Your Settings

Connections & Setup Chapter 1 29 2. Use the up and down arrow buttons to highlight the brand of your VCRthat is connected to the TV and press OK. If your brand isn’t listed, highlight Not Listed and press OK. 3. Keep the VCR on. When you complete these steps, press OK to begintesting. Important ...

Page 32 - What to Expect; Changing Channels; Next Steps; Assisted Setup

Connections & Setup 30 Chapter 1 What to Expect The next time you turn on your TV after setting up the GUIDE Plus+ system, the guide willappear on the screen. The following examples explain what you might see: • If all of the program information has been sent to your TV, the GUIDE Plus+ system a...

Page 33 - Chapter 2; Using the Remote Control

Chapter 2 Graphics contained within this publication are for representation only. 31 Using the Remote Control Overview: • The Buttons on the Remote Control • Programming the Remote to Operate Other Components • How To Use the Remote After You’ve Programmed It • The Learning Feature • Volume Punchthr...

Page 36 - Find Out If You Need to Program the Remote; Point the remote at the component.; Programming the Remote; Direct Entry; Using Direct Entry

34 Chapter 2 Using the Remote Control Tip By default, the AUX button is programmed fora second RCA VCR. If auto tuning is set up, itwill tune to VCR2 input channel. You’ll use these buttons whenyou program the remote forother components. Programming the Remote to OperateOther Components The universa...

Page 37 - Using Automatic Code Search

Chapter 2 35 Using the Remote Control Using Automatic Code Search Note: The AUX button can only search VCR codes, but can be used for a non-VCR device by programming it with direct entry method. If Direct Entry does not work for your component, try Auto Code Search. The following instructions can be...

Page 38 - Adding a Learned Function; up to

36 Chapter 2 Using the Remote Control The Learning Feature Before using the learning feature, make sure this TV’s remote control is programmed to controlother components you have connected to the TV. Programming the remote control erases alllearned commands for that component mode. After you program...

Page 39 - repeating steps 4 and 5. Or, press CLEAR to exit learning mode.; Clearing a Learned Function; To delete a learned button function, use the procedure below.; Deleting ALL Learned Functions

Chapter 2 37 Using the Remote Control 1. Press and hold the component button on the TV’s remote that applies to the function you will be adding (DVD, VCR, SAT/CAB, AUDIO, or AUX). The component button lights. 2. On the TV remote, press and hold the RECORD button. 3. Keep pressing both of the buttons...

Page 40 - Now, test it by turning on your audio receiver or amplifier.; Deleting ALL Volume Punchthrough Commands

38 Chapter 2 Using the Remote Control Volume Punchthrough Feature You may find this feature helpful if you’ve connected your components to an audio/video receiver(A/V receiver) or amplifier, but you want to use the TV’s remote control to operate the volume fora component that is connected to the aud...

Page 41 - Once you find the input source you want, stop pressing INPUT.; Remote Code List; Audio Codes; Cable Box Codes; Front Input

Chapter 2 39 Using the Remote Control Using the INPUT Button 1. Repeatedly press the INPUT button to scroll through the available input sources until you findthe input associated with the component (such as VCR or DVD player) you want to view. 2. Once you find the input source you want, stop pressin...

Page 42 - DVD codes; PVR Codes; Home Theatre in a Box; VCR Codes

40 Chapter 2 Using the Remote Control Cable Box codes (cont’d) Sprucer ........................................................................ 5044Standard Component ........................................ 5037, 5038Starcom .............................................................. 5017, 5045S...

Page 43 - Chapter 3; Using the TV’s Features

Graphics contained within this publication are for representation only. 41 Chapter 3 Using the TV’s Features Chapter Overview: • About the Channel Banner • Digital or Analog TV Channels • About the GUIDE Plus+ System • Parental Controls • How V-Chip Works for the USA and Canada • Auto Tuning Feature...

Page 44 - About the Channel Banner; Program Title/Acquiring Channel; Audio Format Icon; Listening to: English in SRS FOCUS

Using the TV’s Features 42 Chapter 3 About the Channel Banner The Channel Banner appears when you press the TV or INFO button on the remote. If an icon in the channel banner isgrayed out (dim), the feature is not available. The following list describes the items on the Channel Banner screen (left to...

Page 45 - Digital or Analog TV Channels; Press OK to tune to the channel or wait a few seconds.

Using the TV’s Features Chapter 3 43 Ch 88 -888 WWWW Antenna A (Air) 4:3 Normal 480i SD Listening to: English in SRS FOCUS MPAA - Not Rated 60 60 - 2 Digital or Analog TV Channels A single off-air antenna can pick up both analog and digital channels. Digital channels can bemade up of primary channel...

Page 46 - About the GUIDE Plus+ System; Using the GUIDE Plus; GUIDE; The GUIDE Plus

Using the TV’s Features 44 Chapter 3 About the GUIDE Plus+ System The GUIDE Plus+ system is a no-fee, on-screen program guide that listsTV schedules for your area and allows your TV direct control of a cablebox and/or VCR. You must first set up the GUIDE Plus+ system in orderto view this on-screen p...

Page 47 - Listings; Guide Action Buttons; Watch; Expanded Information

Using the TV’s Features Chapter 3 45 Listings The Listings appear each time you enter the GUIDE Plus+ system. They display the current programming for each channel. The current programof Antenna A is displayed in the video window. • Press the up and down arrow buttons on the remote to browsechannel ...

Page 48 - Locking the Video Window; Messages; Promotions; Sort; Sort; News

Using the TV’s Features 46 Chapter 3 Locking the Video Window When highlighting the channel names (the left column on the channel listing), the following Action buttons appear: • Lock/Unlock Press the Blue action button to lock or unlock the video window to either stay at one channel as you browse t...

Page 49 - Schedule; Schedule Menu Action Buttons; Channels

Using the TV’s Features Chapter 3 47 Schedule The Schedule menu allows you to alter the programs for either viewing or recording programs. Schedule Menu Action Buttons • Remove Highlight the Watch or Record timer you wish to remove from the schedule and press the Blue button on the remote. • Change ...

Page 50 - Parental Controls; Antenna B List

Using the TV’s Features 48 Chapter 3 Parental Controls The Parental Controls menu allows you to program your TV so that children cannot see certain programs, channels, browser, or use thebuttons on the front of the TV. The Parental Controls menu also involves software inside your TV (referred to as ...

Page 51 - Editing Channels in the Channel Lists; How V-Chip Works for the USA and Canada; USA V-Chip TV Ratings

Using the TV’s Features Chapter 3 49 For each major channel 0 through 125 found through channel search in Antenna A and B Lists, there are sixsubchannels (1, 2, 3, 4, 5, and 6 to 999). The subchannels are the same for every major channel and are notbased on which subchannels a broadcaster is actuall...

Page 52 - USA Description and Content Themes for Age-Based Ratings; The following is an example of where items are located within the; Rating Field

Using the TV’s Features 50 Chapter 3 Mature Audience Only . Specifically designed to be viewed by adults and may be unsuitable for children under 17. It contains one or more of the following content themes: crude indecent language (L), explicitsexual activity (S), or graphic violence (V). Parents St...

Page 53 - Viewing Age-Based Ratings; Blocking Age-Based Ratings; Hierarchy of Age-Based Ratings

Using the TV’s Features Chapter 3 51 Viewing Age-Based Ratings After you block age-based ratings, you have the option of changing someof the ratings back to Viewable ( V). 1. Determine which blocked rating you want to view. 2. Use the up and down arrow buttons to highlight the rating with astatus of...

Page 54 - Viewing Specific Content Themes; Content Themes; V-Chip Movie Rating Limit; Viewing Movie Ratings

Using the TV’s Features 52 Chapter 3 Viewing Specific Content Themes If you block specific content themes, you have the option of going back and changing some of thecontent themes back to (V) Viewable : V-Chip Movie Rating 2 V-Chip TV Rating 1 Go Back 0 Main Menu Parental Controls USA V-Chip Press O...

Page 55 - Children 8 and Older.; Canada V-Chip English Rating System

Using the TV’s Features Chapter 3 53 Canada V-Chip Canadian TV V-Chip supports two different Canadian rating systems: English and French. Adults . Programming intended for adults 18 and older. It may contain elements of violence, language, and sexual content which could make it unsuitable for viewer...

Page 56 - V-Chip Unrated Program Block; Block Unrated and Exempt Programs; Viewers 16 and over.; Canada V-Chip French Rating System

Using the TV’s Features 54 Chapter 3 Canada V-Chip The English or French Canada V-Chip TV Rating lets you decide which TV programs can and cannot be viewed. To set TV programming limits: 1. Choose Parental Controls from the Main menu. If Parental Controls (TV) have previously been locked, you must e...

Page 57 - Front Button Block; Web Browser Block; Block Web Browser; Auto Tuning Feature; Not Connected

Using the TV’s Features Chapter 3 55 Front Button Block Selecting this option lets you block (disable) or unblock (enable) the TV’sfront buttons. The remote still tunes to any channel. Front Panel Block can: • Keep children from watching TV when the parent is not present. • Keep young children from ...

Page 58 - Channel 2, 3 or 4 Antenna A; PIP Buttons; PIP

Using the TV’s Features 56 Chapter 3 Channel 2, 3 or 4 Antenna A Component is connected to the ANTENNA A jack on the back of the TV, and you want the TV to tune to channel 2, 3, or 4 when you press the correspondingbutton on the remote. Reminder: make sure the component’s Channel 2/3 or 3/4 switch i...

Page 59 - Using the PIP Feature; Channel Control; You cannot view closed captioning in the PIP window.

Using the TV’s Features Chapter 3 57 Tip A typical use of SWAP is to scan through channels in the PIP window, andwhen you find a channel you like, press SWAP to display that channel inthe main picture. Using the PIP Feature The PIP feature is only available for analog (NTSC) channels. PIP won’t work...

Page 60 - Using the Web Browser; Browser Times Out Automatically

Using the TV’s Features 58 Chapter 3 Using the Web Browser Important: To use the TV’s web browser, you must have your TVconnected to the Internet (e.g., cable modem or DSL) and subscribe toan Internet Service Provider (ISP). Web Browser 9 Assisted Setup 8 Preferences 7 Connections 6 Parental Control...

Page 61 - Controlling the Web Browser

Using the TV’s Features Chapter 3 59 Controlling the Web Browser As stated previously, the remote control and front panel buttons support only basic browserfunctions. However, the optional keyboard makes browser navigation much easier and is the onlyway to enter a URL address. Below is a table that ...

Page 62 - To do a 1394 timer recording, schedule it through the; Set up 1394 Recording Preferences; Go to the

Using the TV’s Features 60 Chapter 3 • A dialogue box appears when you press the RECORD button to let you know the 1394 component is recording thechannel that you selected. • You can select a default recording preference: record all subchannels on a major channel or record only a specificsubchannel....

Page 63 - Chapter 4; Picture Quality Menu

Graphics contained within this publication are for representation only. 61 Chapter 4 Using the TV’sMenu System Chapter Overview: • Menus, On-Screen Help, and Control Panels • Picture Quality Menu • Audio Menu • Time Menu • Connections Menu • Preferences Menu 1614682A.06_menu_8.8 9/18/03, 5:29 PM 61

Page 64 - Using the TV’s Menu System; Navigating the Menu System; Exiting a menu

62 Chapter 4 Using the TV’s Menu System Tips A shortcut method to access a menu item is topress the number button on the remote thatmatches the number next to the on-screenmenu. For example, in the Main Menu, press 3to go straight to the Audio menu. Feel free to explore the menu system. If you’reeve...

Page 65 - Sliders; Press OK to select or de-select the option.; Numeric Entries; Use the left/right arrow button to highlight the field.; Action Buttons; Radio Buttons

Chapter 4 63 Using the TV’s Menu System Sliders Sliders are used to select a specific point of a control that has continuous levels.To make adjustments: 1. Press the left or right arrow button on the remote to highlight the slider forthe feature you want to adjust. 2. Press the up or down arrow butt...

Page 66 - Picture Settings; Contrast; Picture Presets

64 Chapter 4 Using the TV’s Menu System Picture Quality Menu The Picture Quality menu contains menus to configure video settings: Picture Settings, Picture Presets, Auto Color, Color Warmth, Noise Reduction, AdvancedSettings, and Reset Controls. Each one is described below. To access the Picture Qua...

Page 67 - Auto Color; Cool; Noise Reduction; Edge Enhancement

Chapter 4 65 Using the TV’s Menu System Auto Color Auto Color minimizes the flesh tone variations of the TV picture. A different Auto Color setting can be stored for each input. Choose On or Off , depending on your preference. Reset Controls 7 Advanced Settings 6 Noise Reduction 5 Color Warmth 4 Aut...

Page 68 - Green Stretch; Advanced; Horizontal Position

66 Chapter 4 Using the TV’s Menu System Green Stretch Green Stretch makes green “greener” and increases the saturation. Nature shows and sporting events are especially enhanced by this feature. The options are Off , Low , and High . Any change to this feature is applicable to all video inputs and do...

Page 69 - Reset Controls; Audio Menu; Equalizer Presets; Mono

Chapter 4 67 Using the TV’s Menu System Digital Audio Out 8 Fixed/Variable Out 7 Balance 6 SAP 5 Audio Language 4 Sound Logic 3 Audio Processor Audio Processor 2 Equalizer Presets 1 Go Back 0 Main Menu Audio Press or to point to an option, then press OK to select it. Press to return to the menu. The...

Page 70 - Stereo; Sound Logic; Sound Logic On; Audio Language; SAP

68 Chapter 4 Using the TV’s Menu System • Stereo Splits the incoming stereo audio signal into left and right front channels. Most TV programs and recorded materials have stereo audio. The channel banner displays the wordStereo when you tune to a program that is broadcast in stereo. • Adds greater de...

Page 71 - Balance; Variable Output, Speakers On

Chapter 4 69 Using the TV’s Menu System Balance The Balance setting applies to the internal speakers, rear external speakers, and the headphone output. Balance does not affect any other audio output. Balanceis how much audio (loudness) gets sent to the left and right speakers. Note: Balance setting ...

Page 72 - Time; Antenna Info; Connections Menu

70 Chapter 4 Using the TV’s Menu System Time Menu The Time menu lets you set up time-related features and a 1394 timed recording. Time menu consists of Sleep Timer, Record/Wake Timer, and Time of Day. • Sleep Timer A one-time event that is used to set the TV to turn off at a specific time. • Record/...

Page 73 - Full Search; Quick Search

Chapter 4 71 Using the TV’s Menu System Ethernet Setup 9 Special Features 8 1394 Setup 7 Auto Tuning 6 Signal Type Signal Type 5 Signal Source 4 Software Upgrade 3 Channel Search 2 Antenna Info 1 Go Back 0 Main Menu Connections You can select the Air/Cable setting for Antenna A and Antenna B. Press ...

Page 74 - Auto Tuning; DTVLink Connect; Special Features; Initial Channel; Ethernet Setup

72 Chapter 4 Using the TV’s Menu System Use the keyboard or the remote's arrow keys to enter thehost name. This may be the only setup you need to do. Reset All 4 Proxy Server 3 IP Address 2 Host Name Host Name 1 Go Back 0 Main Menu Connections Ethernet Setup Some Internet Service Providers (phone/ca...

Page 75 - Preferences Menu; Closed Captioning; Caption Display; Closed Captioning On; Analog Captions; CC

Chapter 4 73 Using the TV’s Menu System Caption Style 5 Caption Priority 4 Digital Captions 3 Analog Captions Analog Captions 2 Caption Display 1 Go Back 0 Main Menu Preferences Closed Captioning Press or to point to an option, then press OK to select it. Press to return to the menu. You can select ...

Page 76 - Digital Captions; analog; Caption Style; Screen Format

74 Chapter 4 Using the TV’s Menu System Lamp Power 8 7 Digital Channel Info Menu Language 6 Translucency 5 Color Scheme 4 Record Output 3 Screen Format Screen Format 2 Closed Captioning 1 Go Back 0 Main Menu Preferences Select Normal for 4:3 images to retain their width andheight. Side panels will a...

Page 77 - Stretch; Record Output; Cropped Recording (Center; Color Scheme; Translucency

Chapter 4 75 Using the TV’s Menu System Lamp Power 8 Digital Channel Info 7 Menu Language 6 Translucency 5 Color Scheme 4 Record Output 3 Screen Format 2 Closed Captioning 1 Go Back 0 Main Menu Preferences Press or to point to an option, then press OK to select it. Press to return to the menu. You c...

Page 78 - Menu Language; Digital Channel Info; Lamp Power

76 Chapter 4 Using the TV’s Menu System Menu Language The menu language can be changed to one of three languages: English, Spanish or French . The menu language can also be selected when using the Assisted Setup menu. Note: Spanish and French are not available in the guide, browser, or in some softw...

Page 79 - Reference; Chapter 5

Graphics contained within this publication are for representation only. 77 Reference Chapter Overview: • Troubleshooting • Specifications • Accessory Information • Limited Warranty • Care and Cleaning • FCC Information • Index Chapter 5 1614682A.07_refs_8.8 9/18/03, 5:30 PM 77

Page 80 - References; Troubleshooting; TV Problems

References 78 Chapter 5 Troubleshooting Most problems you encounter with your TV can be corrected by consulting the following troubleshooting list. Note for U.S. customers: If you prefer, we can provide you with the name of an Authorized Service Representative who will visit you home for a fee to in...

Page 81 - May be a weak station. Use Audio menu to choose

References Chapter 5 79 If you’ve connected a component to your A/V receiver, such as a DVD player or satellite receiver, you may experience a slight delay between the audio heard and the video seen. This occurs because the digital audio is sent directly to the speakers while the videomust be proces...

Page 82 - GUIDE Plus+ System Problems

References 80 Chapter 5 No picture, no sound but TV is on • Maybe the cable/air function is set to the wrong position. Select GUIDE Plus+ Menu from the Main menu, select the GUIDE Plus+ Setup option, and provide the correct information on the following screens. Go to pages 46-47 for detailed instruc...

Page 83 - Doesn’t tune to correct antenna input; The Remote Control Doesn’t Work; The rating limits don’t work; Problems with 1394 Recording/Playback

References Chapter 5 81 • Make sure there is a tape in the VCR and that the VCR is connected properly. • Make sure VCR is tuned to the line input. Don’t change channels. • Be sure that you set up the VCR in the GUIDE Plus+ Setup menus . If you don’t complete the Configuring for a VCR steps successfu...

Page 84 - HDTV Specifications; Tuning Capability

References 82 Chapter 5 HDTV Specifications ** Tuning Capability Channel Tuning ....................................................................... NTSC/ATSC/64 QAM - 256 QAMDigital Cable Compatibility ..................................................... 1394 (DTVLink), 64 QAM - 256 ..............

Page 85 - Convenience

References Chapter 5 83 Matrix Surround Sound ....................................................... YesSecond Audio Program (SAP) ............................................. YesSound Logic Audio Leveler ................................................. YesSRS Labs TruSurround XT ...................

Page 86 - Accessory Information; Monaural; RG-6 Coaxial Burial Cable; Replacement Lamp; Custom DLP HDTV Accessories

References 84 Chapter 5 Accessory Information The following accessories are available from most dealers and electronics supply stores in caseyou want to position your components farther apart or need additional cables. Monaural VCR Dubbing Audio/ Video Cable is a double cable that lets you connect t...

Page 87 - Remote Control; Detach Her

References Chapter 5 85 Price Part No. Description Qty Remote Control This is the remote control that camepacked with your TV.Replacements or spares canbe ordered as needed. 2-way Signal Splitter,4-way Signal Splitter* helps you connect to othercomponents. Amplified VHF/UHF/FMAntenna allows you to e...

Page 88 - Placing an Order; Have your Visa, MasterCard or Discover Card; AUTHORIZED SIGNATURE

References 86 Chapter 5 Placing an Order BY PHONE: Have your Visa, MasterCard or Discover Card ready and call 1-800-338-0376 . Use this number only to place an order for accessory items listed on the order form. BY MAIL: Detach and mail the completed order form with credit card information, money or...

Page 89 - Limited Warranty; What your warranty covers:

References Chapter 5 87 Limited Warranty What your warranty covers: • Defects in materials or workmanship. For how long after your purchase: • One year from date of purchase for labor. • One year from date of purchase for parts. • One year from date of purchase for light engine and lamp assembly. Th...

Page 90 - Care and Cleaning; CAUTION: Turn OFF your TV before cleaning.; Product Registration:

References 88 Chapter 5 Care and Cleaning CAUTION: Turn OFF your TV before cleaning. You can clean the TV as required, using a soft lint-free cloth. Be sure to occasionally dust the ventilation slots in the cabinetto help assure adequate ventilation. The TV’s screen may be cleaned with a soft, lint-...

Page 91 - FCC Information; • Reorient or relocate the receiving antenna.

References Chapter 5 89 FCC Information This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of theFCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residentialinstallation. This equ...

Page 92 - Index; Symbols

Index 90 Chapter 5 Symbols 1394 3 Cable 8Jacks 22Recording 59, 72 Problems 81 Setup 72 16:9 Aspect ratio 1, 423:2 pulldown 2, 664:3 Aspect ratio 1 Normal 74Stretch 75Zoom 75 6-pin connector 16 A AVR 2Accessories 84 Antenna 85Order form 85Splitters 85 Action buttons 63 GUIDE Plus+ system 45 Adding a ...