RCA DLA-SX21SE - Manuals - manualsarea.com

Page 2 - SAFETY PRECAUTIONS; About the installation place; IMPORTANT SAFEGUARDS; IMPROPER USE CAN RESULT IN POTEN-; IMPORTANT INFORMATION

2 SAFETY PRECAUTIONS About burning-in of the D-ILA device Do not allow the same still picture to be projected for a longtime or an abnormally bright video picture to be projected.Do not project video images with high-intensity or high contraston a screen. The video image could be burnt into the D-IL...

Page 3 - *DO NOT allow any unqualified person to install the unit.; Safety Precaution

3 • Slots and openings in the cabinet are provided for ventila- tion. These ensure reliable operation of the product and pro-tect it from overheating. These openings must not be blockedor covered. (The openings should never be blocked by plac-ing the product on bed, sofa,rug, or similar surface. It ...

Page 4 - Do not cut off the main plug from this equipment.; POWER CONNECTION

4 Safety Precaution The wire which is coloured green-and-yellow must be connectedto the terminal which is marked with the letter E or the safetyear th or coloured green or green-and-yellow.The wire which is coloured blue must be connected to the ter-minal which is marked with the letter N or coloure...

Page 5 - Caution; Viewing conditions

5 Caution About burning-in of the D-ILA device ● Do not allow the same still picture to be projected for a longtime or an abnormally bright video picture to be projected. Do not project video images with high-intensity or high con-trast on a screen. The video image could be burnt into theD-ILA devic...

Page 6 - Optional Accessories; Please ask your authorized dealer for the details.; • Replacement filter; Inner filter

6 Contents SAFETY PRECAUTIONS ............................................ 2Caution ........................................................................ 5Accessories ................................................................ 6Controls and Features .............................................

Page 7 - Using the Carrying Handle; Controls and Features; Please clean the filter regularly with eg, a vacuum cleaner.

7 2 AC Power Input Terminal 3 Carrying Handle 1 Control Panel 8 Remote Sensor (Front) p Zoom Ring 9 Focus Ring 7 Exhaust Vents 4 Foot Lever (for front adjustable foot) 6 Lens Cap 5 Lens 4 Foot Lever (for front adjustable foot) Using the Carrying Handle * DLA-SX21SU/DLA-SX21SE does not have a zoom or...

Page 8 - Bottom Surface; Remove this cover when replacing the lamps. (

8 q Connector Panel u Filter 7 Air Inlet w Speaker e Lamp Cover t Remote Sensor (Rear) r Exhaust Vents y Front Adjustable Foot i Rear Fixed Foot Blocked as it is not in used. Opening it forcibly will cause damage to the machine. Bottom Surface 7 Air Inlet Rear Side/ Right Side/Bottom Surface Control...

Page 9 - Connector Panel; PC1 Input Terminal; * Input of external sync signals is automatically detected.; DC OUT Terminal

9 Controls and Features Connector Panel 2 PC1 Input Terminal 4 DC OUTTerminal 6 REMOTETerminal 5 AUDIO Input Terminal 7 CONTROL RS232CIN/OUT Terminal 9 VIDEO InputTerminal 1 PC2 Input Terminal 3 PC3 Input Terminal 8 Y/C InputTerminal R P R /C R G Y B P B /C S V DVI H/C S PC1 PC3 PC2 AUDIO IN REMOTE ...

Page 10 - Control Panel on the Projector; Indicator Display on the Control Panel; On stand by mode

10 8 TEMP indicator 1 STAND BY indicator 2 OPERATE indicator 3 OPERATE button 4 VOLUME button 5 EXIT button 6 ENTER button 7 HIDE button p VIDEO button q PC button w H-KEYSTONE button e V-KEYSTONE button r MENU button t CURSOR button( / / / ) 9 LAMP indicator y PRESET button V-KEYSTONE PC LAMP H-KEY...

Page 11 - * The OPERATE button will not work within approximately 1

11 Control Panel on the Projector Controls and Features 1 STAND BY Indicator Light on : on stand by mode.Blinking : on cool down mode. 2 OPERATE Indicator Light on : During projection. 3 OPERATE button When this projector is in the standby mode, pressing thisbutton for more than 1 second will turn o...

Page 12 - Remote Control’s signal transmitter; Remote Control Unit

12 QUICK ALIGN. PC VIDEO VOLUME PRESET HIDE ENTER MENU EXIT FREEZE OPERATE V-KEYSTONE H-KEYSTONE SCREEN DIGITAL ZOOM FOCUS W S 1 Remote Control’s signal transmitter 2 OPERATE button q VIDEO button w PC button e H-KEYSTONE button r V-KEYSTONE button 3 SCREEN button 4 DIGITAL ZOOM button 5 FREEZE butt...

Page 13 - * The OPERATE button will not work for approximately 1

13 Controls and Features 1 Remote Control’s signal transmitter ( ☞ page 18) 2 OPERATE button When the projector is in the standby mode, pressing thisbutton for one second or more will turn on the projector andlight up the OPERATE indicator. Press it one second ormore again and the projector will tur...

Page 14 - Loading Batteries into the Remote Control; Open the back cover; Beware of the following:

14 Loading Batteries into the Remote Control Please load batteries into the remote control. Once the remote control starts to work erratically, replace the batteries. Controls and Features 1. Open the back cover Push the hook on the back cover lightly in the direction ofthe arrow and lift it up. 2. ...

Page 15 - Precautions for Installation; Installing the Projector; Installation Environment; Allowable storage temperature range; Precaution for Usage; • Block the exhaust vents.; Adjusting the Inclination of the Projector; Adjusting the vertical angle of the projector; Vertical angle adjustment range

15 Precautions for Installation Installing the Projector Please read the following properly when installing the projector. Installation Environment Please do not install or use this projector in the follow-ing places as it is a precision device. This could causefire or a malfunction. • Where there i...

Page 16 - Installing the Projector against the Screen; Side View; Trapezoidal-distortion can be corrected using the KEYSTONE; Mounting the Projector; Precaution for ceiling-mount; • Do not mount on places that will be subjected to knocks

16 Installing the Projector against the Screen Installing the Projector The projector should be placed so that the center line of the lens is at a right angle to the screen as in the following figures. 䡵 Side View 䡵 Top View ● Trapezoidal-distortion can be corrected using the KEYSTONE button on the ...

Page 17 - Projection Distance and Screen Size; Install the projector within this range.; Screen installation

17 Projection Distance and Screen Size • This projector uses 1.3x manual zoom lens for projection.• The range of projection for good focus is approximately 1.6m to approximately 12m when the aspect ratio of the screen is 4:3. Install the projector within this range. • If the KEYSTONE is adjusted, th...

Page 18 - Effective Range and Distance of the Remote Control Unit; When the remote control unit fails to work properly; to work. Please check the cable connection.; the total distance (distance between projector and screen,; The operable angles of the remote control unit are 30 ̊ right; Using as a wireless remote control unit

18 QU IC K A LIG N. PC VID EO VO LU ME PR ES ET HID E ME NU EX IT FR EE ZE OPE RA TE V-KEYSTON E H-KEYS TONE SC RE EN DIG IT AL ZO OM FOCUS W S EN TER Screen Projector Projector Remote ControlUnit Remote Control Sensor(rear) 20˚ 20˚ 30˚ A B 30˚ QU IC K AL IGN. PC VID EO VO LU ME PRES ET HIDE MENU EX...

Page 19 - Signals that can be input into the projector; Connecting to Various Devices; Video signals; Scanning frequency in the following range can be inputted.; • The computer has a video signal output port.

19 Signals that can be input into the projector The following signal can be input to the projector. Connecting to Various Devices Video signals (1) Response to Decoder NTSC NTSC4.43 PAL SECAM VIDEO O O O O Y/C O O* 1 O – – – – – Y,P B /C B ,P R /C R * 3 O* 2 O* 2 O* 2 O* 2 G,B,R,H/Cs,V* 4 O* 2 O* 2 ...

Page 20 - Allowable input signals; Signal; PC system

20 PC98 VESA350 PC/AT PC98 DOS/V VGA 60Hz* DVI* VGA 72Hz* VGA 75Hz* VGA 85Hz* SVGA 56Hz* SVGA 60Hz* SVGA 72Hz* SVGA 75Hz* SVGA 85Hz* XGA 43Hz* XGA 60Hz* XGA 70Hz* XGA 75Hz* XGA 85Hz* SXGA 43Hz* SXGA 60Hz* SXGA 75Hz* SXGA 85Hz SXGA+ UXGA 60Hz Mac MAC13 MAC16 MAC19 MAC21 Video HDTV(1035i) 60Hz HDTV(10...

Page 21 - Image input; Sound input; Connecting to Video Devices; Connection; Connecting to Devices

21 R P R /C R G Y B P B /C S V DVI H/C S PC1 PC3 PC2 AUDIO IN REMOTE DC OUT5V } 1.5A RS-232C OUT RS-232C IN Y/C VIDEO CONTROL VIDEO IN Video Device 1 Video Device 2 VCR (Video cassette recorder) S-video cable (separately available) PC Audio cable (separately available) AV connection cable (separatel...

Page 22 - Right side of projector; Connecting to Computers

22 R P R /C R G Y B P B /C S V DVI H/C S PC1 PC3 PC2 AUDIO IN REMOTE DC OUT5V } 1.5A RS-232C OUT RS-232C IN Y/C VIDEO CONTROL VIDEO IN Personal Computer connector cable (supplied) Right side of projector Desktop type (DOS/V, PC-9800 etc.) Desktop type (DOS/V, etc.) Desktop type (Macintosh) Notebook ...

Page 23 - Connection for controlling more than one projector; Control from external device; Please request the connection cable from us if needed.

23 Notebook type Connect to Computer Connect to the IN terminal of third projector RS-232C connection cable (separately available)(Cross cable) Projector Second projector R P R /C R G Y B P B /C S V H/C S PC1 PC2 AUDIO IN REMOTE DC OUT5V } 1.5A RS-232C OUT RS-232C IN CONTROL B P B /C S V H/C S PC1 P...

Page 24 - Lens Cap; Cautions Against Fire and Electric Shock; Do not use power cords other than those supplied.; When using the projector:; Remove the lens cap.; Be sure to fit the lens cap on when the projector is not in use to; Removing the Lens Cap

24 Power cord (supplied) 2 1 Connecting to Various Devices 1. Connect the supplied power cord to the power input ter-minal of the projector. 2. Insert the main plug of the supplied power cord into thewall outlet. After all devices have been connected, connect the supplied power cord. Connecting the ...

Page 25 - Basic Operations; Note; Basic Operation Procedures; Power On

25 MENU V-KEYSTONE PC LAMP H-KEYSTONE VOL. EXIT ENTER VIDEO TEMP STAND BY OPERATE 1- 2 2 QUICK ALIGN. PC VIDEO VOLUME PRESET HIDE ENTER MENU EXIT FREEZE OPERATE V-KEYSTONE H-KEYSTONE SCREEN DIGITAL ZOOM FOCUS W S 1- 2 2 LAMP TEMP STAND BY OPERATE Light on Projector: Indicator part LAMP TEMP STAND BY...

Page 26 - Display using the direct buttons; Screen display; Notes

26 PC 1 PC 2 PC 3 Y/C VIDEO Audio-Vol 12 Digital Zoom x12 Vert.Keystone 0 Horiz.Keystone 0 3. 4. Tele side Wide side Near side Far side DLA-SX21U/DLA-SX21E Basic Operations Display using the direct buttons The direct buttons enable direct switching andoperation without having to go through themenu. ...

Page 27 - Adjusting the Sound Volume; To increase the volume: press VOLUME; • When the sound volume is displayed on the screen, pressing; Power Off; • The OPERATE button will not work for approximately 1 minute; • Please do not pull out the plug from the power source when

27 MENU V-KEYSTONE PC LAMP H-KEYSTONE VOL. EXIT ENTER VIDEO TEMP STAND BY OPERATE 5 OPERATE OPERATE QUICK ALIGN. PC VIDEO VOLUME PRESET HIDE ENTER MENU EXIT FREEZE OPERATE V-KEYSTONE H-KEYSTONE SCREEN DIGITAL ZOOM FOCUS W S 5 VOL. VOLUME Projector: Control panel Remote Control Unit LAMP TEMP STAND B...

Page 28 - Frequently used Convenient Functions; DIGITAL ZOOM; “Digital zoom” Display

28 QUICK ALIGN. PC VIDEO VOLUME PRESET HIDE ENTER MENU EXIT FREEZE OPERATE V-KEYSTONE H-KEYSTONE SCREEN DIGITAL ZOOM FOCUS W S Digital zoom X1.2 Direction buttons available DIGITAL ZOOM Remote Control Unit x 2.0 Digital zoom X1.2 Direction buttons available Digital zoom X2 Direction buttons availabl...

Page 29 - Turning Off Image and Sound; Press the HIDE button once:; Press the HIDE button again:; Video Image and audio sound come on again.; Displaying a Still Picture; Press the FREEZE button.

29 PRESET MENU EXIT ENTER HIDE QUICK ALIGN. PC VIDEO VOLUME PRESET HIDE ENTER MENU EXIT FREEZE OPERATE V-KEYSTONE H-KEYSTONE SCREEN DIGITAL ZOOM FOCUS W S HIDE HIDE Projector: Control Panel Remote Control Unit Digital zoom available Frozen FREEZE “FREEZE” icon FREEZE Remote Control Unit Basic Operat...

Page 30 - “Vert. Keystone” Display; Removing the Trapezoidal Distortion of the Image; • The range where the trapezoidal distortion can be rectified is; vertically and 10 ̊ horizontally; with respect to the projector screen.; Press H-KEYSTONE / to adjust in the horizontal direction

30 MENU V-KEYSTONE PC H-KEYSTONE VOL. EXIT VIDEO QUICK ALIGN. PC VIDEO VOLUME PRESET HIDE ENTER MENU EXIT FREEZE OPERATE V-KEYSTONE H-KEYSTONE SCREEN DIGITAL ZOOM FOCUS W S V-KEYSTONE V-KEYSTONE Projector: Control Panel Remote Control Unit Projector: Control Panel Remote Control Unit V-KEYSTONE V-KE...

Page 31 - Using the Quick Alignment function; The Quick Alignment function.; Selecting the Screen Size; Screen size display

31 QUICK ALIGN. PC VIDEO VOLUME PRESET HIDE ENTER MENU EXIT FREEZE OPERATE V-KEYSTONE H-KEYSTONE SCREEN DIGITAL ZOOM FOCUS W S QUICK ALIGN. PC VIDEO VOLUME PRESET HIDE ENTER MENU EXIT FREEZE OPERATE V-KEYSTONE H-KEYSTONE SCREEN DIGITAL ZOOM FOCUS W S Image of 4:3 Setting the screen size to [4:3] Set...

Page 32 - Adjustments and Settings Using Menus; The Menu Structure; The menus of the projector have the following structure.; Video Input selection; • The display language of the menus is set to “English” when; Main menu

32 Adjustments and Settings Using Menus The menus displayed on the screen are used to perform adjustment and setup for the projector. The Menu Structure The menus of the projector have the following structure. Video Input selection Note • The display language of the menus is set to “English” when th...

Page 33 - When PC input is selected

33 Adjustments and Settings Using Menus When PC input is selected Note • The display language of the menus is set to “English” when the projector is bought. The display language can be se-lected from the following 8 languages. ( ☞ page 39) However, certain phrases and nouns, etc., are displayedonly ...

Page 34 - When no image signal is inputted; Submenu

34 Adjustments and Settings Using Menus When no image signal is inputted Note • The display language of the menus is set to “English” when the projector is bought. The display language can be se-lected from the following 8 languages. ( ☞ page 39) However, certain phrases and nouns, etc., are display...

Page 35 - The Menu Operation Buttons; Button; press to exit the menu mode.

35 QUICK ALIGN. PC VIDEO VOLUME PRESET HIDE ENTER MENU EXIT FREEZE OPERATE V-KEYSTONE H-KEYSTONE SCREEN DIGITAL ZOOM FOCUS W S PRESET MENU V-KEYSTONE PC LAMP H-KEYSTONE VOL. EXIT ENTER HIDE VIDEO TEMP STAND BY OPERATE Menu operation button Menu operation button MENU MENU ENTER EXIT ENTER ENTER Main ...

Page 36 - The Procedure for Menu Operation

36 QUICK ALIGN. PC VIDEO VOLUME PRESET HIDE ENTER MENU EXIT FREEZE OPERATE V-KEYSTONE H-KEYSTONE SCREEN DIGITAL ZOOM FOCUS W S MENU V-KEYSTONE PC LAMP H-KEYSTONE VOL. MENU EXIT ENTER VIDEO TEMP STAND BY OPERATE 2, 4 3, 5 6 1 5 16 2, 4 3, 55 A 12 12 1 12 12 ENTER ENTER Image adj. Set up Logo Options ...

Page 37 - Adjustment and Setting Using Menus; “Set up” menu; The Menu Configuration; When Video input is selected

37 Adjustment and Setting Using Menus 3 “Set up” menu To set the basic setting for Tracking and Positioning of the pic-ture image, you can adjust the items in the “Set up” menu asbelow.• The adjustment items differ when selecting Video input and PC input. When Video input is selected Adjustment item...

Page 38 - When there is no image signal inputted; “Position” menu; Adjusts the menu display position. Press the (; “Decoder” menu; ) CURSOR buttons to choose the “Decoder” of; “Logo” menu

38 “Clamp” This can be used if the screen of the PC/workstation is unstable in that it dims andbrightens.Set the position of the clamp pulse toBack porch (“BP”) or Sync tip (“SP”).Normally, “BP” is used.Setting value: “ST”, “BP” [“BP”] “Sync Level” Although the inputted image signal isadjusted so th...

Page 39 - “Capture start”; “Page 1”; “Color profile” menu; To choose the color table of the image signals, press the (; “Page 2”; “Language” menu

39 8 “Capture start” The status of capture is displayed in bold. “Capt. in prog. (Approx. 2min)” The image is being read into the projec-tor. During this time interval, the projec-tor will not respond to any command sig-nal inputted by the user. “Signal can not be captured” Clear the message with th...

Page 40 - “Information” menu; When video input is selected

40 e “Information” menu When video input is selected Adjustment item (press 䊱 / 䊲 ) Adjustment content (press 䊴 / 䊳 ) “Input” Displays the image input (VIDEO, Y/C,PC2) when projecting. “Switcher” Displays the selected switcher matchingthe specification of this projector.0: not being used.1-10: switc...

Page 41 - Editing and Projecting Logo

41 MENU V-KEYSTONE H-KEYSTONE VOL. EXIT ENTER 2 2 3,5 4 QUICK ALIGN. PC VIDEO VOLUME PRESET HIDE ENTER MENU EXIT FREEZE OPERATE V-KEYSTONE H-KEYSTONE SCREEN DIGITAL ZOOM FOCUS W S 3,5 4 Notes • Setting the logo display item in the “Logo” menu to “ON” and switching on the power dis-plays the D-ILA lo...

Page 42 - Editing and projecting logo

42 MENU V-KEYSTONE H-KEYSTONE VOL. EXIT ENTER 1~6 6 QUICK ALIGN. PC VIDEO VOLUME PRESET HIDE ENTER MENU EXIT FREEZE OPERATE V-KEYSTONE H-KEYSTONE SCREEN DIGITAL ZOOM FOCUS W S 1~6 6 ´ ´ ´ ´ ´ ´ ´ ´ Image adj. Set up Logo Options Language Information A ENTER ENTER ( - ) ( + ) 12 ( - ) ( + ) 12 G B R ...

Page 43 - • When the accumulated lamp time reaches 1900 hours:; Replacing the Lamp; The light source lamp and its lamp time; About lamp replacement

43 Handle 䡵 When lamp time exceeds 1000 hours: When the accumulated lamp time reaches 1000, a messageindicating “1000 hr“ will appear on the projected screen.* Press any key to delete the message. 䡵 When lamp time exceeds 1900 hours. • When the accumulated lamp time reaches 1900 hours: The LAMP indi...

Page 44 - Remove the lamp unit.; Insert the new lamp unit fully in.; Attach the light-source lamp cover and tighten; Tighten the two screws with a

44 Lamp unit 3. Remove the lamp unit. Replacing the Lamp 4. Insert the new lamp unit fully in. 5. Close the handle, and tighten the screw. Tighten the two screws with a ª screwdriver. 6. Attach the light-source lamp cover and tighten the screw. Tighten the two screws with a ª screwdriver. Note When ...

Page 45 - Insert the main plug. The projector will go into the stand; Resetting the lamp time; To ensure resetting of the lamp time; Caution for reset work

45 QUICK ALIGN. PC VIDEO VOLUME PRESET HIDE ENTER MENU EXIT FREEZE OPERATE V-KEYSTONE H-KEYSTONE SCREEN DIGITAL ZOOM FOCUS W S PRESET HIDE EXIT press for 2 seconds EXIT PRESET HIDE VOL( ) Press as per normal Press for 2 seconds or more Replacing the Lamp 1. Insert the main plug. The projector will g...

Page 46 - Put on rubber gloves when using a neutral detergent.; Cleaning and Replacing the Filter; Pull out the power cord from the wall outlet.; • When removing the lower filter:; Reinstalling the filter.; • When reinstalling the lower filter:; Reinstall the lower filter by inserting it into the projector.; • When reinstalling the inner filter:

46 lower filter inner filter claw lower filter inner filter claw ● Put on rubber gloves when using a neutral detergent. ● After you washed the filter in water, make sure that thefilter is completely dry before reinstalling, otherwise elec-tric shock or malfunction could occur. ● Do not clean this fi...

Page 47 - Troubleshooting; Symptom

47 Troubleshooting Before consulting your authorized dealer, please check the following points. Symptom Probable cause Corrective action Page Po w e r i s n o t s u p -plied. Light is not emitted,or light is dim. With power on, theprojector works butstops abruptly in afew minutes. Video image doesno...

Page 49 - Please input the image signal.; What to do when these messages are displayed; Message

49 PC 1 No Input PC 1 Frequency of input signal is out of range. No device is connected to the input terminal.The terminal is connected but no signal is output from the connected device.• The selected input mode (input terminal) name is shown above the mes- sage. [ Please input the image signal. The...

Page 50 - When the “Lamp time” reaches 1000 hours

50 1000h EXIT Lamp replacement EXIT Lamp replacement EXIT WARNING What to do when these messages are displayed When the “Lamp time” reaches 1000 hours [ A message indicating “1000 h” appears on the projected screen. • Press any key to delete the message. Every time the projector is turned on, this m...

Page 51 - About warning indicators; Warning Indication; Action to be taken upon warning indications; Please follow the procedures below.; and restart according to the basic operation procedures.; Warning

51 About warning indicators If something abnormal has occurred in the projector, the warning mode sets on and the abnormality will be indicated by a combina-tion of indicators displayed on the control panel as shown in the following table.Then, the projector automatically stops projection and runs t...

Page 52 - Specifications

52 Model name/Ar ticle name DLA-SX21U/E DLA-SX21SU/SE D-ILA multimedia projector Emission method D-ILA ® * (Reflective Active Matrix Principle) Display panel/ size D-ILA /0.7 (1400pixels x 1050pixels) x 3 (Total number of pixels: 4,410,000) Projecting lens x 1.3 zoom lens (2.1: ~2.6:1) (DLA-SX21U/E)...

Page 53 - Model Name; Front

53 Dimensions (unit: mm) Specifications 6M (Depth 10mm) An attachment screw should be of a length more than 6mm and less than 10mm. D1 Center of lens 181 20 67.5 298 2 7 38.2 298 300 360 A 89 267 115.9 65.4 15 20 ~ 56 292 B L D L D A B DLA-SX21U/E Model Name 8.2 92.5 38.2 36.2 DLA-SX21SU/SE 11.0 79....

Page 54 - Pin arrangement; PC 1 terminal

54 4 2 9 8 16 8 7 6 5 4 3 2 1 3 1 11 12 13 6 7 1 2 10 9 4 5 3 8 15 14 24 7 15 23 6 14 22 3 11 19 2 10 18 5 13 21 4 12 20 1 9 17 Specifications Pin arrangement Y/C terminal Pin number Signal name 1 GND (Y) 2 GND (C) 3 Y 4 C Pin number Signal name 1 N/C 2 RD 3 TD 4 N/C 5 GND Pin number Signal name 6 N...

Page 55 - RS-232C external control; -1 Command data format; Header; -3 Parameters used for the data format

55 Specifications RS-232C external control By connecting a computer to the projector with a RS-232C cross cable (D-sub 9 pins), you can control the projector with thecomputer. The commands to control the projector and the response data format against the received commands are explainedhere.For detai...

Page 56 - External control command table

56 Specifications 3) Special parameters Input switching parameters Character Hex. Meaning ‘0’ 30 Y/C ‘1’ 31 VIDEO ‘3’ 33 PC1 ‘4’ 34 PC2 ‘5’ 35 PC3 Operation mode parameters Character Hex. Meaning ‘0000’ 30h 30h 30h 30h Stand-by mode ‘0001’ 30h 30h 30h 30h Power-on mode ‘0002’ 30h 30h 30h 30h Cool-do...

Page 57 - Memo

Page 58 - Printed in Japan