RCA CC9360 - Manuals

3 Table of Contents Using the Advanced Features .............................................................. 61 Night Mode .................................................................................... 61Fade/Wipe Effects .........................................................................

5 Chapter 1 Connections & Setup Chapter Overview: • Parts Checklist • Buttons and Controls • Getting Started • Powering the Camcorder • Using the Shoulder Strap • Setting the Date and Time • Setting the Tape Recording Speed Changing Entertainment. Again.

6 Chapter 1 Connections & Setup Shoulder strapPart # ACS091 Camcorder Parts Checklist Make sure the box includes the items shown here: Caution: Only use the power supply provided with this unit. Using other power supplies may damage the unit. AC power supplyPart # 250814 Battery packPart # 24780...

Connections & Setup Chapter 1 7 Buttons and Controls BLAN K SEA RCH FOCUS + + BAT. RELEASE Viewfinder MENU/BRIGHTdial SNAPSHOTbutton Power Zoom / VOL lever FOCUS / BLANKSEARCH button Power switch Recording Start/Stop button BAT.RELEASEswitch Eyepiecefocus control Video light Microphone Handstrap...

Connections & Setup Chapter 1 9 Getting Started This section describes the basics on how to set up your camcorder to record for the firsttime. Refer to the other sections for detailed operation and feature options. Unpack the camcorder and accessories • The items shown are packed with the camcor...

10 Chapter 1 Connections & Setup Attach the lens cap To protect the lens, attach the provided lens cap to the camcorder as shown in theillustration. Attach the power supply Since the battery must be charged before it can be used the first time, you need to use anAC outlet to power the camcorder....

Connections & Setup Chapter 1 11 Turn on the camcorder Press in the Lock button while setting the Powerswitch to the desired setting, either automatic ( A ) or manual ( M ) record mode, powered off (OFF), or in playback mode ( ). The POWER indicator comes on when the camcorderis turned on. Autom...

12 Chapter 1 Connections & Setup Insert a cassette tape 1. Make sure the camcorder is connected to apower supply. 2. Press in the Lock button while setting the Powerswitch to A (automatic record). 3. Slide and hold the OPEN/EJECT switch in thedirection of the arrow then pull the cassetteholder c...

Connections & Setup Chapter 1 13 Use the LCD monitor or viewfinderto see what’s recording Using the LCD monitor 1. Remove the lens cap. 2. Open the monitor 90˚ from the camcorderbody. 3. Tilt the monitor 180˚ forward or 90˚ down asrequired for convenient viewing whilerecording. 4. To adjust the ...

14 Chapter 1 Connections & Setup Start recording 1. Remove the lens cap. 2. Press in the Lock button and set the Powerswitch to A (automatic record). (The POWER indicator comes on.) 3. Press and release the Recording Start/Stopbutton to start recording. (REC appears in the viewfinder or LCD moni...

Connections & Setup Chapter 1 15 Turn off the camcorder 1. Set the Power switch to OFF. 2. Close the LCD monitor. Powering the Camcorder You can power your camcorder with a battery or ACpower. Charging the Battery 1. Set the Power switch to OFF. 2. Raise the viewfinder. 3. Slide the battery into...

16 Chapter 1 Connections & Setup Notes : • If a protective cap is on the battery,remove it before use or charging. • When charging a battery for the firsttime or after a long storage period, theCHARGE indicator may not come on.Remove the battery and try again. • Charge the battery in temperature...

Connections & Setup Chapter 1 17 Approximate charging time Approximate recording time (in minutes) Note: Recording time is reduced significantly when you use the Zoom or Record- Standby modes repeatedly or when you use the LCD monitor repeatedly. Battery Charging Time 247800 approx. 90 min. Batt...

18 Chapter 1 Connections & Setup This icon appears when the battery is fully charged. The icon changes to show that you’ve used some of the battery’spower. As you use more of the battery’s power, the icon changes again. This battery icon flashes in the viewfinder or LCD monitor when thebattery p...

Connections & Setup Chapter 1 19 Using the Power Supply The power supply attaches to the camcorder and lets you power it directly from standardhousehold power. The power supply operates on 110-240 volts, 50/60 Hz. 1. Plug the small end of the power supply into the DC IN jack on the camcorder. 2....

20 Chapter 1 Connections & Setup Using the Shoulder Strap The camcorder’s shoulder strap is designed to let you carry the camera from yourshoulder and – when ready– bring the camcorder to shooting position in one quickmovement. 1. Following the illustration, thread the strap through the eyelet. ...

Connections & Setup Chapter 1 21 Setting the Date and Time You need to set the date and time before it can bedisplayed. Date and time information is recorded onto the tapeat all times, but its display can be turned on or offduring playback (see page 73). 1. Press in the Lock button while setting...

22 Chapter 1 Connections & Setup Setting the TapeRecording Speed You need to select the tape recording speed for thequality of recording you want. 1. Press in the Lock button while setting the Powerswitch to M (manual record). (The POWER indicator comes on.) 2. Press the MENU dial in. (The Main ...

23 Chapter 2 Using the Monitors Chapter Overview: • Seeing What You Are Recording • On-screen Icons Changing Entertainment. Again.

Using the Monitors 24 Chapter 2 180 ° 90 ° Seeing What You Are Recording To see what is recording, use either the LCD monitor or the viewfinder monitor. Whenthe LCD monitor is open more than 25˚, the viewfinder turns off. When you close theLCD monitor, the viewfinder turns on. Using the LCD Monitor ...

Using the Monitors Chapter 2 25 Using the Viewfinder The camcorder’s viewfinder is a miniature monitorthat displays in black and white. For convenientviewing, rotate the viewfinder up or down. Note : When the LCD monitor is open more than 25˚, the viewfinder turns off. Eyepiece Focus Control The eye...

Using the Monitors 26 Chapter 2 Recording Menu Icons Playback Menu Icons Warning Icons Indicates the amount of power left in the rechargeable battery. An empty battery icon flashes on screen when the battery’s power isalmost exhausted. Missing Cassette: Appears when the Power switch is set to either...

Using the Monitors Chapter 2 27 TAPE END DIFFERENTFORMATTEDTAPE SET DATE/ TIME! LENS CAP E01-E06 Condensation: CONDENSATION, OPERATION PAUSED PLEASE WAIT appears if moisture occurs inside the camcorder. When this iconappears, remove the tape and wait at least one hour before using thecamcorder again...

Using the Monitors 28 Chapter 2 Program AE with Special Effects Icons Appears when you select SHUTTER 1/60 to set the shutter speed to 1/60th of a second. Appears when you select SHUTTER 1/100 to set the shutter speed to 1/100th of a second. May reduce flicker in some situations. Appears when you se...

Using the Monitors Chapter 2 29 Appears when you select SLOW 10X to record scenes in darker lighting. Appears when you select VIDEO ECHO to record scenes with a ghostly feel. Appears when you select :FINE to record outdoors on a sunny day. Appears when you select :CLOUD to record outdoors on a cloud...

Using the Monitors 30 Chapter 2 Appears when you use the zoom lever. Appears when you adjust the brightness of the monitor with theBRIGHT dial. During playback, the VOLUME icon appears when you adjust the volume of the speaker with the VOL control (also zoom lever). Displays the sound mode (either 1...

Using the Monitors Chapter 2 31 B K Fade and Wipe Icons Press the FADE/WIPE button to display the icon for the fade or wipe you want to select. Appears when you select white fade. Appears when you select black fade. Appears when you select black and white fade. Appears when you select mosaic fade. A...

Using the Monitors 32 Chapter 2 Focus Icons OtherIcons Steady PixIcon Tape SpeedIcon SP Time CodeIcon TC10:06:20 Time-RemainingIcon 120MIN Appears when you select shutter wipe over the previous screen. Appear when you are adjusting focus manually using the FOCUS menu. The icons also flash when the a...

33 Chapter 3 Recording Chapter Overview: • Recording Details • Recording Tips Changing Entertainment. Again.

Recording 34 Chapter 3 Recording Details 1. Remove the lens cap. 2. Press in the Lock button while setting the Powerswitch to A or M (automatic record or manual record mode). (The POWER indicator comeson.) 3. Open the LCD monitor or adjust the viewfinder. 4. Press and release the Recording Start/Sto...

Recording Chapter 3 35 Tip The further you rotate the zoomlever, the quicker the zoom action. Self-Recording You can even record yourself while viewing yourown image in the LCD monitor. Open the LCDmonitor and tilt it upward 180 ° so that it faces forward, then point the lens toward yourself and sta...

Recording 36 Chapter 3 Using Digital Zoom You can use digital zoom to magnify images to amaximum of 400 times normal magnification. 1. Press in the Lock button while setting the Powerswitch to M (manual record). (The POWER indicator comes on.) 2. Press in the MENU dial. (The Main Menuappears.) 3. Ro...

Recording Chapter 3 37 Using Steady Pix™ Digital Image Stabilization is used to compensate forunstable images cause by camera shake, especially athigh magnifications. 1. Press in the Lock button while setting the Powerswitch to M (manual record). (The POWER indicator comes on.) 2. Press in the MENU ...

Recording 38 Chapter 3 Using the Video Light To brighten the scene when natural lighting is toodim, the camcorder uses a built-in video light. You can turn on the video light at all times, set toturn on automatically when the camcorder sensesadditional light is needed, or turn off altogether. Set th...

Recording Chapter 3 39 Cautions • Never operate the video light closer than 1 foot to people or otherobjects. • The video light becomes very hot. Do not touch it during use or rightafter use. Serious injury may result. • Do not place the camcorder in a carrying case right after using thelight. • Nev...

Recording 40 Chapter 3 Selecting a Snapshot Mode You can choose from 5 ways to display your digitalpictures, including pin-up, frame, full, multi-4, andmulti-9. 1. Press in the Lock button while setting the Powerswitch to M (manual record). (The POWER indicator comes on.) 2. Press in the MENU dial. ...

Recording Chapter 3 41 • Select FULL to take a snapshot with no frame. • Select MULTI-4 to take four snapshots in a quick progression (giving the illusion of movement)and place all four images within one shot. • Select MULTI-9 to take nine snapshots in a quick progression (giving the illusion of mov...

Recording 42 Chapter 3 Taking Snapshots 1. Remove the lens cap. 2. Press in the Lock button while setting the Powerswitch to A or M (manual record). (The POWER indicator comes on.) 3. When you’re ready to take a picture, pressSNAPSHOT. Notes: • To turn off the shutter sound, (seepage 58). • Snapshot...

Recording Chapter 3 43 Blank Search Helps you find where you start recording in themiddle of a tape to avoid time code interruption. 1. Press in the Lock button while setting the Powerswitch to (playback mode). (The POWER indicator comes on.) 2. Press BLANK SEARCH. ( BLANK SEARCH appears and blinks,...

Recording 44 Chapter 3 Recording Tips • To improve picture quality and color reproduction, try to make sure indoor scenesare well-lit. • Don’t move the camcorder rapidly from side-to-side while recording. A steady,gradual “pan” avoids blurring and “jitter”. • Use the viewfinder or LCD monitor to mak...

45 Chapter 4 Playback Chapter Overview: • Playback Options • Choose Your Connection Changing Entertainment. Again.

Playback 46 Chapter 4 Playback Options The camcorder’s playback features include displayingstill images and high-speed shuttle search. In thissection, you’ll also learn how to connect yourcamcorder to a TV or VCR. Playback features (Play, Pause, Forward, Reverse,Stop) can be handled using the camcor...

Playback Chapter 4 47 • If a blank portion on the tape is playedback, the screen may become black. Thisis not a malfunction. • LCD monitor/viewfinder indications: • When power is supplied from a battery appears. When power is supplied through the power supply, does not appear. • When a tape is stopp...

Playback 48 Chapter 4 Still Playback Mode Still playback pauses the tape, freezing asingle frame. 1. Press the Play/Pause button / during playback to freeze the image. 2. To resume normal playback, press the Play/Pause button again. • If pause continues for more than a few minutes, the camcorder may...

Playback Chapter 4 49 Frame-By-Frame Playback Allows frame-by-frame searching. 1. During playback, press / to pause the image. 2. For forward playback, rotate the MENU dialtowards the +. For reverse playback, rotate thedial towards the -. • To resume normal playback, press / again. EXPOSURE NIGHTMOD...

Playback 50 Chapter 4 Connecting to a TV (or VCR) with Audio/Video Input Jacks To connect your camcorder to a TV (or VCR) with audio/video inputs, you need to usethe supplied audio/video cable. If your TV is already connected to a VCR, attach thecamcorder to the VCR and watch what the camcorder is r...

Playback Chapter 4 53 Dubbing to a VCR 1. Following the illustration in this chapter, connect the camcorder and the VCR. 2. Press in the Lock button while setting the camcorder’s Power switch to , turn on the VCR’s power, and insert the appropriate tapes in the camcorder and the VCR. 3. Make sure th...

Playback 54 Chapter 4 Dubbing to Another Digital Video Camcorder You can also copy a recording to another camcorder with a DV jack using an optional DVcable. To Use this Camcorder as a Player: 1. Make sure all units are turned off before making any connections. 2. Connect one end of the optional DV ...

55 Chapter 5 Advanced Features Chapter Overview: • Using the Menus for Advanced Adjustment • Menu Definitions • Using the Advanced Features Changing Entertainment. Again.

Advanced Features 56 Chapter 5 Using the Menus ForAdvanced Adjustment This camcorder is equipped with an on-screen menusystem that simplifies many of the more detailedcamcorder settings. 1. Press in the Lock button while setting the Powerswitch to M (manual record). (The POWER indicator comes on.) 2...

Advanced Features Chapter 5 57 Menu Definitions The following charts will help you get acquainted with the various menus and some briefdefinitions of their features. For more detailed explanation, refer to the correspondingsections. Main Menu WIPE/FADER Refer to Fade/Wipe Effects ( see page 62 ). PR...

Advanced Features 58 Chapter 5 Manual Menu The following settings are available only in M (manual record mode). System Menu The following settings are available only in and M (manual record mode). BEEP OFF Beeps are turned off and shutter sound is not heard. BEEP Beeps sound when any operation is pe...

Advanced Features Chapter 5 59 DEMO ON Factory Preset: Demonstrates certain functions automatically. MODE When DEMO MODE is set to ON and you have exited all menus, the demonstration starts. Operating the Power zoomlever during the demonstration stops the demonstrationtemporarily. If the Power zoom ...

Advanced Features 60 Chapter 5 Notes: • The System and Display functions which are set when the Power switch is set to M (manual record) are also applied when the Power switch is set to . CLOCK ADJ. only appears when the Power switch is set to M . • The Display settings are effective even when the P...

Advanced Features Chapter 5 61 Using the Advanced Features Night Mode This feature can make dark subjects or areas evenbrighter than they would be under good, naturallighting. Although the recorded image is not grainy,it may look as if it is strobing due to the slow shutterspeed. 1. Press in the Loc...

Advanced Features 62 Chapter 5 Fade/Wipe Effects These effects let you make professional-lookingscene transitions. Fade-ins or wipe-ins work atrecording start, and fade-outs or wipe-outs work atrecording end. 1. Press in the Lock button while setting the Powerswitch to M (manual record). (The POWER ...

Advanced Features Chapter 5 63 Wipes WIPE–CORNER Wipes in on a black screen from the upper right to the lower left corner, revealing thescene. Wipes out from lower left to upper right, leaving a black screen. WIPE–WINDOW Wipes in on a black screen from the center of the screen towards the corners, r...

Advanced Features 64 Chapter 5 WIPE–SLIDE The next scene gradually wipes in over the previous scene from the right to the left. WIPE–DOOR The previous scene wipes out from the center to the right and left, like a door beingpushed open to reveal the next scene. WIPE–SCROLL The new scene wipes in over...

Advanced Features Chapter 5 65 Program AE With Special Effects 1. Press in the Lock button while setting the Powerswitch to M (manual record). (The POWER indicator comes on.) 2. Press in the MENU dial. (The Main Menuappears.) 3. Rotate the MENU dial to highlight PROGRAM AE. Press in the MENU dial to...

Advanced Features 66 Chapter 5 SPORTS High shutter speed clearly captures fast-moving action. SNOW Useful when recording scenes in bright surroundings, such as snow, where subjects mightotherwise appear too dark. SPOTLIGHT Useful when recording scenes in strong direct lighting, such as spotlights, w...

Advanced Features Chapter 5 67 B/W MONOTONE Recorded scenes are shot in black and white. Combine this with the Cinema mode for aclassic look ( see page 58 ). CLASSIC FILM Recorded scenes have a slow-frame, classic movie feel. STROBE Recorded scenes appear as series of consecutive snapshots. SLOW 4X ...

Advanced Features 68 Chapter 5 Exposure Control This feature automatically adjusts the iris for the bestavailable picture quality, but you can override it andmake the adjustment manually. Manual exposureadjustment is recommended in the followingsituations: • When shooting using reverse lighting or w...

Advanced Features Chapter 5 69 • To brighten the subject quickly, press theBACKLIGHT button on top of the camerain automatic exposure mode (this is alsothe rewind button). The icon is displayed and the subject is brightened.If pressed again, disappears and the brightness returns to the previous leve...

Advanced Features 70 Chapter 5 3. Adjust zoom so the subject fills the screen, then press and hold the MENU dial formore than two seconds. (The exposure control indicator and the Iris Lock icon ( )appear). 4. Press in the MENU dial again to select it and the icon changes to . The iris islocked. Note...

Advanced Features Chapter 5 71 Manual Focus Make the necessary viewfinder adjustments to usethe viewfinder ( see page 25 ). 1. Press in the Lock button while setting the Powerswitch to M (manual record). (The POWER indicator comes on.) 2. Press FOCUS. (The manual focus icon appears.) • To focus on a...

Advanced Features 72 Chapter 5 White Balance Adjustment White balance refers to the correctness of colorreproduction under various lighting. If the whitebalance is correct, all other colors will be accuratelyreproduced. The white balance is usually adjusted automatically.However, more advanced camco...

Advanced Features Chapter 5 73 Notes: • To return to automatic white balance, select AUTO in step 4. Or rotate the Powerswitch to A (automatic record). • White balance cannot be used when the SEPIA or MONOTONE mode is activated(see pages 66-67). Manual White Balance Perform Manual White Balance when...

Advanced Features 74 Chapter 5 Notes: ON • The selected display can be recorded. • If you do not want to record the display,select the OFF mode before shooting. AUTO • In this mode, the date is replaced after 5seconds with AUTO but isn’t recorded. • Your camcorder automatically recordsthe date for a...

Advanced Features Chapter 5 75 • Select OFF to record in normal mode suitable for standard TVs. • Select CINEMA to insert black bands on the top and bottom of the screen. Note : During playback on wide screen TVs, the black bands are cut and the screen ratiobecomes 16x9. A icon appears in the camcor...

Advanced Features 76 Chapter 5 Wind Cut To help cut down on the noise created by wind whenshooting outside, use the Wind Cut feature. Note : When using wind cut, the sound quality changes. This is normal. 1. Press in the Lock button while setting the PowerSwitch to M (manual record). 2. Press in the...

77 Chapter 6 Downloading to a PC Chapter Overview: • Connecting to a Computer Changing Entertainment. Again.

Downloading to a PC 78 Chapter 6 Connecting to a Computer To transfer your still pictures and videos to your PC or Macintosh, you will need anoptional DV cable, a suitably equipped computer with IEEE1394 connection (also knownas Firewire), a DV card, and editing software equipped with your computer ...

79 Chapter 7 Other Information Chapter Overview: • Troubleshooting • Final Notes • Care and Cleaning • Traveling Tips • Specifications • Limited Warranty • FCC and Industry Canada Information • Optional Accessories • Index Changing Entertainment. Again.

Other Information 80 Chapter 7 Troubleshooting If you’re having problems with your camcorder, try the solutions in this section. If theproblem still exists, please consult your nearest RCA authorized service center. External noise and interference (from a TV, a radio, etc.) might prevent your camcor...

Other Information Chapter 7 81 Bright, crystal-shaped spots appear in the LCD monitor and theviewfinder. Sunlight is directly entering the lens. This is not a defect of the camcorder. The rear of the LCD monitor is hot. The light used to illuminate the LCD monitor causes it to be hot. Close the LCD ...

Other Information 82 Chapter 7 Recording Problems Recording cannot be performed. Make sure the Erase Protection tab is in the position that allows recording. If not, slidethe tab. Some tapes have removable tabs. If the tab has been removed, cover the holewith adhesive tape. Recording does not start....

Other Information Chapter 7 83 Final Notes Power • Perform charging where the temperature is between 10 ° C and 35 ° C (50 ° F and 95 ° F). 20 ° C to 25 ° C (68 ° F to 77 ° F) is the ideal temperature range for charging. If the environment is too cold, charging may be incomplete. • Charging times ar...

Other Information 84 Chapter 7 Video Recording • When the Power switch is set to A or M and the LCD monitor is opened at an angle of 25˚ or more, the LCD monitor switches on and the viewfinder switches offautomatically to save power. • The cassette tape holder can’t be opened unless a power supply i...

Other Information Chapter 7 85 Tapes • A power supply must be attached to load or eject a tape. • When loading a tape, it takes a few seconds for the cassette tape holder open. Neverapply force to the holder or door cover as this might result in damage to thecamcorder and void the warranty. • If the...

Other Information 86 Chapter 7 Care and Cleaning After Using the Camcorder 1. Set the Power switch to OFF. 2. Slide and hold the OPEN/EJECT switch in the direction of the arrow then pull thecassette holder cover open until it locks. Remove the tape. Be careful not to touchthe inside of the cassette ...

Other Information Chapter 7 87 Proper Care and Storage • Keep dirt from entering the camcorder’s cassette tape door. Dust and grit are abrasiveand cause excessive wear to both the recording/playback heads and tapes. • Always cap the lens when the camcorder is not in use. • Before handling the camcor...

Other Information 88 Chapter 7 Things to Avoid • Do not attempt to disassemble the camcorder. There are no user-serviceable parts inside. • Avoid operating the camcorder immediately after moving it from a cold location to awarm location. Give the camcorder 1-1/2 to 2 hours to reach a stable temperat...

Other Information Chapter 7 89 Specifications Camcorder Format DV NTSC standard Power source DC 11 V (Using AC power supply) DC 7.2 V (Using battery pack) Power consumption Viewfinder on:4.3 W LCD monitor on:5.3 W Video light: 3.5 W Signal system NTSC-type Recording/Playback Format Video: digital co...

Other Information 90 Chapter 7 Audio/Video Jacks S-Video Y: 1 V(p-p), 75 Ω , analog C: 0.29 V)p-p), 75 Ω , analog Video 1 V (p-p), 75 Ω analog output (via Video output connector) Audio 300 mV (rms), 1 k Ω analog stereo output (via Audio output connector) DV 4-pin, IEEE 1394 compliant Service Port ø3...

Other Information Chapter 7 91 Limited Warranty RCA Digital Camcorder Limited Warranty What your warranty covers: • Defects in materials or workmanship. For how long after your purchase: • 90 days from date of purchase for labor charges. • One year from date of purchase for parts. The warranty perio...

Other Information 92 Chapter 7 To receive a replacement Camcorder before you return yours: Option I 1. Provide your Discover, MasterCard, or Visa account number and expiration date toour phone representative. This is for security purposes. If we receive your unit,excluding all accessories, within 14...

Other Information Chapter 7 93 To receive a replacement unit after we have received your unit: 1. Write the SR number on the outside of the carton used to return the unit.Make sure you insure your shipment in case of damage or loss. 2. Carefully pack the unit, excluding all accessories, using the or...

Other Information 94 Chapter 7 Product Registration: • Please complete and mail the Product Registration Card packed with yourCamcorder. It will make it easier to contact you should it ever be necessary. Thereturn of the card is not required for warranty coverage. Limitation of Warranty: • THE WARRA...

Other Information Chapter 7 95 FCC and Industry Canada Information FCC Regulations state that unauthorized changes or modifications to this equipment mayvoid the user’s authority to operate it. This device complies with part 15 of FCC Rules. Operation is subject to the following twoconditions: (1) T...

Other Information 96 Chapter 7 Optional Accessories We invite you to take a look at some great ideas for sparking creativity and adding to thefun of using your camcorder. The following pages have a selection of accessories to helpmake your memorable moments look and sound even better. These accessor...

Other Information Chapter 7 97 252885 A/V Cable Replacement for the included A/V cable. Used toattach the camcorder to an external component likea TV or VCR. H2011 DV Cable Used to connect the camcorder to a compatible PCwith a IEEE1394 DV interface. Cautions: • Before using a tripod, make sure it i...

Other Information 98 Chapter 7 To order accessories, contact your local Dealer. If a dealer is not nearby, you can also follow the directions below to order by telephoneor direct-by-mail. United States and Canada Orders To place your order by phone, have your Visa, MasterCard, or Discover card ready...

Other Information Chapter 7 99 Accessories Order Form Description Part No. Price Qty. Total Super Lightweight Tripod AC088 $ 49.95 Soft Camcorder Case AC201A $ 34.95 Shoulder Strap ACS091 $ 12.95 Rechargeable Battery 247800 $ 84.95 Extended Life Battery BB46L $ 69.99 AC Power Supply 250814 $ 92.95 I...

Other Information 100 Chapter 7 ¤ r r s TM Charge your order on your VISA,MasterCard, or Discover Card by filling in below USE YOUR CREDIT CARD IMPORTANT: Copy complete account number from your VISA card IMPORTANT: Copy complete account number from your MasterCard Expiration date: Expiration date: C...

Index Chapter 6 103 Index A Accessories 96 order form 99 Advanced features 61Audio/video input jacks 50Auto focus 70Automatic recording AutoShot 11 B Basic playback 46Battery care and storage 18charging 15icon 18life 18removing 16 Blank search 43Buttons and controls 7 C Cam reset 76Cassettes care an...

Index 104 Chapter 6 J Journalistic shooting 34 L LCD monitor 13, 24LCD monitor brightness adjusting 47 Lens cap attaching 10 Letterbox 75Light switch 11Limited warranty 91 M Manual focus 71Manual white balance 73Manual white balance icons 29Menu definitions 57MENU/BRIGHT dial 13Menus 56Mini DV 12 N ...

Thomson multimedia Inc. 10330 North Meridian StreetIndianapolis, IN 46290 Please do not send any products to the Indianapolis address listed in this manual oron the carton. This will only add delays in service for your product. ©2001 Thomson multimedia Inc.Trademark(s)® RegisteredMarca(s) Registrada...