RCA 25110 - Manuals
RCA 25110 – Manual in PDF format online.
Manuals:
Manual RCA 25110
Summary
2 Equipment Approval Information Your telephone equipment is approved for connection to the Public Switched Telephone Network and is in compliance with parts 15 and 68, FCC Rul es and Regulations and the Technical Requirements for Telephone Terminal Equipment published by ACTA. 1 Notification to the...
Table of Contents E quipmEnt A pprovAl i nformAtion .................................................. 2 i ntErfErEncE i nformAtion .............................................................. 3 H EAring A id c ompAtibility ............................................................ 3 l icEnsing ...
Table of Contents P aGinG the h andSet and h eadSet ........................................................ 23 i n u Se i ndicator l iGht ......................................................................... 23 On the Handset ........................................................................
S E E M A R K I n g O n B O T T O M / B A C K O F P R O D U C T RISK OF ElECTRIC ShOCK DO nOT OPEn WARNING: to PreVeNt Fire or electrical ShocK haZard, do Not eXPoSe thiS ProdUct to raiN or moiStUre. ThE lIghTnIng FlASh AnD ARROW hEAD WIThIn ThE TRIAnglE IS A WARnIng SIgn AlERTIng YOU OF “DAngEROUS ...
Parts Checklist Make sure your package includes the following items: Wall base Handset Battery compartment cover Telephone line cord AC power adaptor Connections & Setup Charger Handset battery Belt clip Headband Headset battery Ear clip ring Ear clip Headset Headset sponge cover
Important Installation Information Safety Precautions • Never install telephone wiring during a lightning storm.• Never install telephone jacks in wet locations unless the jack is specifically designed for wet locations. • Never touch non-insulated telephone wires or terminals, unless the telephone ...
Modular telephone line jack Wall plate Connections & Setup CAUTION: Always disconnect all phone cords from the base unit before battery installation or replacement. INSTALLATION NOTE: Some cordless telephones operate at frequencies that may cause or receive interference with , microwave ovens, a...
10 Phone Installation Connecting the AC (Electrical) Power Charger unit Plug the AC power adaptor into an electrical outlet and the DC connector into the bottom of the charger. CAUTION: Only use the 5-2678 power adaptor that came with this unit. Using other power adaptors may damage the charger unit...
11 Installing the Batteries Installing the Handset Battery CAUTION: To reduce the risk of fire or personal injury, only use the Thomson Inc. approved Ni-MH battery model 5-2683. NOTE: You must connect the handset battery before use. 1. Locate the handset battery and battery door which are packaged t...
12 Installing the Headset Battery CAUTION: To reduce the risk of fire or personal injury, only use Thomson Inc. approved Li-polymer battery model 5-2707. NOTE: You must connect the headset battery before use. 1. Locate the battery which is packaged inside a plastic bag and separate from the headset....
1 Headset Set Up Headband Attachment 1. Hold the headband and insert it into keyed slot marked with an arrow on the headset. NOTE: To ensure proper installation, the connector is keyed and can only be inserted one way 2. Rotate the L-shaped band 90 degrees clockwise.3. Align the L-shaped band into t...
1 To switch from ear to ear Rotate microphone boom to reposition nearer to mouth. Connections & Setup
1 Ear Clip Attachment 1. Attach the ear clip ring to the headset and ensure all three contact points align and are engaged. Connections & Setup 2. Insert ear clip into either side of ear clip ring, matching with the L or R marked on ear clip ring to fit either your left or right ear. To switch f...
1 CID/Vol 6 (Caller ID/Volume button) Redial/Format (button) Talk (button) Prog/Flash (program/flash button) *Exit (button) Mem (memory button) #Pause (button) display Off (button) Handset Layout Mute/Del (mute/delete button) CID/Vol 5 (Caller ID/Volume button) Headset (button) VM (visual message wa...
1 Vol 3 or 4 (Volume button) Charge indicator Talk/Off (button) Headset Layout Connections & Setup Charge contact
1 Handset Set Up There are six programmable menus available: Display Language, Tone/Pulse Dialing, Local Area Code, Ringer Tone, Ringer Volume and Factory Default. When you program these settings, make sure the phone is OFF (not in talk mode). Pressing the *Exit button will remove you from the menu ...
1 Ringer Tone 1. Press the Prog/Flash button until RINGER TONE 1 shows in the display. 2. Use the CID/Vol ( 5 or 6 ) buttons or the handset number pad to select and listen to a ringer tone. There are seven ringer tones to choose from. The default setting is 1 . 3. Press the Prog/Flash button to conf...
20 Telephone Operation Making a Call On the Handset 1. Press the Talk button on the handset to get a dial tone.2. When finished, press the Off button on the handset to hang up. On the Headset 1. Press the Talk/Off button on the headset OR the Headset button on the handset to get a dial tone. 2. When...
21 Call Transfer During a call this feature allows you to transfer the call back and forth from handset to headset.1. Press the Headset button on the handset or the Talk/Off button on the headset, the call will then be transferred from handset to headset. 2. Press the Talk button on the handset, the...
22 Flash Use the Prog/Flash button to activate custom calling services such as call waiting or call transfer, which are available through your local phone company. TIP: Do not use the Talk button to activate custom calling services such as call waiting, or you will hang up the phone. Exit Press the ...
2 Operation Paging the Handset and Headset Press the Page button on the wall base. The handset and headset will beep and the in use indicators on both will flash for two minutes (or until page is terminated.) To terminate page signal: Press the Page button on the wall base. OR Press any button on th...
2 Operation Call Timer The built-in call timer shows in the display and counts the call time in minutes and seconds. Temporary Tone Dialing This feature is useful only if you use pulse dialing service. Temporary tone dialing enables pulse (rotary) service phone users to access touch-tone services of...
2 Caller ID Caller ID This unit receives and displays information transmitted by your local phone company. This information can include the phone number, date, and time; or the name, phone number, date, and time. The unit can store up to 99 calls for later review. Caller ID with Call Waiting Provide...
2 Caller ID Transferring CID Records to Memory You may transfer a Caller ID record to your phone’s memory. NOTE: It is important that you format CID records correctly before storing in memory. It is not possible to re-format CID records stored in memory. 1. Use the CID/Vol ( 5 or 6 ) buttons to scro...
2 Caller ID Deleting All Records 1. Make sure the phone is OFF (not in TALK mode). 2. Use the CID/Vol ( 5 or 6 ) buttons to display any Caller ID record. 3. Press and hold the Mute/Del button until the unit beeps and DELETE ALL? shows in the display. 4. Press Mute/Del again to erase all records. You...
2 Memory Store up to 50 24-digit numbers in memory for quick dialing. This memory feature is in addition to the 99 Caller ID records that can be stored in the Caller ID memory log. Storing a Name and Number in Memory 1. Make sure the phone is OFF (not in TALK mode). 2. Press the Mem button.3. Press ...
2 Viewing a Stored Number Press the Mem button on the handset and key in number 01 to 50 or use the CID/ Vol ( 5 or 6 ) buttons to scroll to the number you want to view. Changing a Stored Number 1. Repeat steps 1 through 6 in Storing a Name and Number in Memory.2. Press the Mem button and REPLACE ME...
30 Dialing a Stored Number 1. Make sure the handset or headset is ON (in TALK mode) by pressing the Talk or Headset button on the handset or the Talk/Off button on the headset. 2. Press the Mem button.3. Press the memory location button (01 through 50 records). 4. Press the Talk or Headset button on...
1 Headset and Belt Clip Operation Connecting an Optional Headset to the Handset 1. Connect the headset (optional) to the HEADSET jack as shown. The handset receiver and microphone are disabled when the headset is connected. TIP: To order a headset, please refer to the accessory order form at the end...
32 Replacing the Batteries Handset Battery CAUTION: To reduce the risk of fire or personal injury, only use Thomson Inc. approved Ni-MH-battery model 5-2683. 1. Make sure the telephone is OFF (not in TALK mode) before you replace battery. 2. Remove the battery compartment door.3. Disconnect the cord...
Headset Battery CAUTION: To reduce the risk of fire or personal injury, only use Thomson Inc. approved Li-polymer battery model 5-2707. 1. Make sure the telephone is OFF (not in TALK mode) before you replace battery. 2. Remove the foam cover and open the battery compartment door on the headset. 3. D...
INCOMPLETE DATA Caller information has been interrupted during transmission or the phone line is excessively noisy. MESSAGE WAITING Indicates a message is available. MUTE ON Indicates you are muting a telephone conversation to speak to a third party . NEW Indicates call or calls have not been review...
3 Caller ID No display • Make sure the battery is properly charged for 16 hours.• Make sure the battery is properly installed and connected.• Replace the battery. Make sure the unit is connected to a non-switched electrical outlet. • Disconnect the unit from the electrical outlet and plug it back in...
Service Information Service If trouble is experienced with this equipment, for repair or warranty information, please contact customer service at 1-800-511-3180 . If the equipment is causing harm to the telephone network, the telephone company may request that you disconnect the equipment until the ...
0 Warranty Information Limited Warranty What your warranty covers: • Defects in materials or workmanship. For how long after your purchase: • Two years, from date of purchase. (The warranty period for rental units begins with the first rental or 45 days from date of shipment to the rental firm, whic...
41 Warranty Information • Products purchased or serviced outside the USA.• Acts of nature, such as but not limited to lightning damage. Product Registration: • Please complete and mail the Product Registration Card packed with your unit. It will make it easier to contact you should it ever be necess...
2 DESCRIPTION MODEL NO. AC power adaptor (for charger) 5-2678 Belt clip 5-2679 Ear clip pack 5-2680 Headband pack 5-2681 Optional headset (wired) 5-2588 Replacement battery (NiMH for handset) 5-2683 Replacement battery (Li-polymer for headset) 5-2707 AC power adaptor 5-2678 Accessory Information To ...
4 Index A Accessory Information 42 Adjust Volume from Handset 22 Adjust Volume from Headset 22 Answering A Call 20 Area Code 18 Attaching the Belt Clip 31 B Battery Safety Precautions 33 C Call Timer 24 Call Transfer 21 Caller ID 25, 36 Caller ID Error Message 36 Caller ID with Call Waiting 25 Cause...
Teléfono Inalámbrico de 2.4 GHz y Audífono Inalámbrico con Llamada en Espera – Identificador de Llamada Guía del Usuario Por favor lea este manual antes de operar este producto por primera vez. Modelo 25110
2 Información sobre la Aprobación de Equipo El equipo de su teléfono esta aprobado para la conexión con la red Telefónica Pública (Public Switched Telephone Network) y cumple con los requisitos establecidos en las secciones 15 y 68 de las Reglas y Regulaciones de la FCC y con los Requerimientos Técn...
Tabla de Contenido I nformacIón sobre la a probacIón de e quIpo ..............................................2 e l número de la us está ubIcado en el fondo de la base ...........................2 I nformacIón de I nterferencIas ...................................................................3 c ...
VEA ADVERTENCIA EN LA PARTE POSTERIOR/BASE DEL PRODUCTO. RIESGO DE SACUDIDA ELÉCTRICA NO ABRA ADVERTENCIA: Para PrEVEnir El riESGo dE UnfUEGo o dE Una SacUdida ElEctrica, no EXPonGa EStE aParato a la llUVia o a la HUmEdad. EL RELÁMPAGO Y LA PUNTA DE FLECHA DENTRO DEL TRIÁNGULO ES UNA SEÑAL DE ADVERT...
Lista de Partes Asegúrese de que su empaque contenga los siguientes artículos: Base para la pared Auricular Puerta del compartimento de batería Cable de línea telefónica Adaptador de corriente CA Conexión y Programación Cargador Batería del auricular Broche de cinturón Banda para la cabeza Batería p...
Informacion Importante para la Instalacion Precauciones de Seguridad • Nunca instale cableado telefónico durante una tormenta de relámpagos.• Nunca instale enchufes telefónicos en localizaciones mojadas a menos que el enchufe haya sido diseñado específicamente para localizaciones mojadas. • Nunca to...
Enchufe telefónico modular Placa de pared Conexión y Programación NOTA SOBRE LA INSTALACIÓN: Algunos teléfonos inalámbricos operan en frecuencias que pueden causar o recibir interferencia con Televisiones, hornos de microondas, y videograbadoras cercanos. Para minimizar o prevenir tal interferencia,...
10 Instalación del Teléfono Para Conectar la Corriente AC (Eléctrica) Unidad del cargador Conecte el adaptador de corriente CA en una toma eléctrica y el conector CD en la parte inferior del cargador. CUIDADO: Utilice únicamente el adaptador de corriente CA 5-2678 que es compatible con esta unidad. ...
11 Para Instalar la Baterías Para Instalar la Batería del Auricular CUIDADO: Para reducir el riesgo de fuego o de lastimaduras personales, utilice solamente la batería de Níquel-Hudruro Metálico (Ni-MH) modelo 5-2683 aprobado por Thomson Inc. eso es compatible con esta unidad. NOTA: Usted debe conec...
12 Instalación de la Batería del Audífono CUIDADO: Para reducir el riesgo de fuego o de lastimaduras personales, utilice solamente la batería de Li-polymer modelo 5-2707 aprobado por Thomson Inc. eso es compatible con esta unidad. NOTA: Usted debe conectar la batería del audífono antes de utilizar e...
1 Ajuste del Audífono Banda para la cabeza accesorio 1. Sostenga la banda para la cabeza e insértela en la ranura de acoplamiento marcada con una flecha en el audífono. NOTA: Para asegurar la instalación apropiada de la batería, el conector está diseñado de forma que puede ser insertado solamente de...
1 Conexión y Programación Para cambiar de un oído al otro Gire la pluma del micrófono para reposicionarlo más cerca de la boca.
1 Clip para Oído Accesorio 1. Coloque el anillo del clip para el oído en el audífono y asegúrese que los tres puntos de contacto, estén alineados y que ajusten. 2. Inserte el clip para el oído en cualquiera de los lados del anillo del clip del oído coincidiendo con la “L” o “R” marcados en el anillo...
1 CID/Vol 6 (botón identificador de llamada/volumen) Redial/Format (botón volver a marcar/ formato) Talk (botón llamar) Prog/Flash (botón colgar y servicios especiales/programa) *Exit (botón borrar) Mem (botón memoria) #Pause (botón pausa) pantalla Off (botón terminar) Diagrama del Auricular Mute/De...
1 Vol 3 / 4 (botón volumen) Charge (indicador de carga) Talk/Off (botón llamar/ terminar) Diagrama del Audífono Conexión y Programación Carga contacto
1 Montaje del Auricular Hay 6 menús programables disponibles: Idioma en Pantalla, Marcado por Tono/ Pulso, Código de Area Local, Tono de Timbre, Volumen del Auricular y Ajuste de Fábrica. Cuando se programe estas opciones, asegúrese de que el teléfono esté en OFF (no en el modo hablar). Presionar el...
1 Tono de Timbre 1. Oprima el botón Prog/Flash hasta que TONO TIMBRE 1 se muestre en la pantalla. 2. Use el botón CID/Vol ( 5 o 6 ) o el teclado numérico del auricular para seleccionar y para escuchar un tono de timbre. Hay siete tonos del timbre a elegir. El timbre 1 es la programación de fábrica. ...
20 Operación del Teléfono Para Hacer una Llamada En el Auricular 1. Presione el botón Talk en el auricular para obtener un tono de marcación.2. Al terminar, presione el botón Off en el auricular para colgar. En el Audífono 1. Presione el botón Talk/Off en el audífono O el botón Headset en el auricul...
21 Transferencia de Llamada Durante una llamada esta característica le permite transferir la llamada hacia atrás y adelante del auricular al audífono.1. Presione el botón Headset en el auricular o el botón Talk/Off en el audífono, la llamada será entonces transferida del auricular al audífono. 2. Pr...
22 Flash Utilice el botón Prog/Flash para activar los servicios especiales como llamada en espera o transferencia de llamadas, que son disponibles a través de su compañía telefónica local. SUGERENCIA: No use el botón Talk para activar los servicios especiales como llamada en espera, porque así va us...
2 Operación Búsqueda de Auricular a Audífono Presione el botón Page en la base de pared. El auricular y el audífono emitirán un bip y los indicadores en uso en los dos parpadearán por dos minutos (o hasta que la búsqueda sea terminada). Para terminar la señal de búsqueda:Presione el botón Page en la...
2 Operación Temporizador de Llamadas El temporizador de llamadas integrado aparece en la pantalla y cuenta la duración de cada llamada en minutos y segundos. Tono Temporario para Marcar Esta función es útil únicamente si usted tiene servicio para marcar por pulso. La función de Tono Temporario les p...
2 Identificador de Llamadas Identificador de Llamadas Este aparato recibe y muestra información transmitida por su compañía telefónica local. La información puede incluir el número telefónico, fecha y hora; o el nombre, número telefónico, fecha y hora. El aparato puede almacenar hasta 99 llamadas pa...
2 Identificador de Llamadas Para Transferir Archivos del Identificador de Llamadas (CID) a la Memoria Usted puede transferir un archivo del Identificador de Llamadas a la memoria de su teléfono. NOTA: Es importante que usted formatee los archivos del Identificador de Llamadas correctamente antes de ...
2 Identificador de Llamadas Para Borrar Todos los Datos 1. Asegúrese de que el teléfono está apagado (no en modalidad de hablar).2. Utilice los botones CID/Vol ( 5 o 6 ) para mostrar cualquier archivo del Identificador de Llamadas. 3. Oprima y sostenga el botón Mute/Del hasta que el aparato emita un...
2 Memoria Almacene hasta 50 números de 24 dígitos en la memoria para discado rápido. Esta función de memoria es además de los 99 datos del identificador de Llamadas que pueden ser almacenados en la memoria. Para Almacenar un Nombre y Número en la Memoria 1. Asegúrese de que el teléfono esté apagado ...
30 Para marcar un Número Guardado 1. Asegúrese de que el auricular o el audífono estén en ON (en modo TALK) presionando el botón Talk o Headset en el auricular o el botón Talk/Off en el audífono. 2. Oprima el botón Mem.3. Oprima el botón de memoria (archivos 01 al 50). 4. Oprima el botón Talk o Head...
1 Operación del Audífono y Broche del Cinturón Para Conectar Unos Audífonos Opcionales al Auricular 1. Conecte los audífonos (opcionales) al Clavija del Audífono como se muestra en la ilustración. La bocina del auricular y el micrófono se desactivan automáticamente cuando se conectan los audífonos. ...
32 CABLE NEGR O CABLE ROJO BA TERIA OPRIMA FIRMEMENTE HACIA ABAJO Reemplazo de Baterías CUIDADO: Para reducir el riesgo de fuego o de lastimaduras personales, utilice solamente la batería de Níquel-Hudruro Metálico (Ni-MH) modelo 5-2683 aprobado por Thomson Inc. eso es compatible con esta unidad. Ba...
Batería del Audífono CUIDADO: Para reducir el riesgo de fuego o de lastimaduras personales, utilice solamente la batería de Li-polymer modelo 5-2707 aprobado por Thomson Inc. eso es compatible con esta unidad. 1. Asegúrese que el teléfono esté desactivado (no en modalidad para hablar -TALK) antes de...
3 Máquina Contestadora Los siguientes mensajes especiales indican el estado actual de un mensaje o del aparato. LLAMADA PRIVADA La persona está llamando desde un número cuya transmisión ha sido bloqueada. NOMBRE PRIVADA Indica que el nombre de la persona que llama ha sido bloqueado para no ser trans...
HDST Audífono. HDST 00:00 VOL1 Indica que la bocina del audífono está activada. DATO INCOMPLETO La identificación de quien llama ha sido interrumpida durante la transmisión o la línea telefónica es excesivamente ruidos. MESSAGE WAITING Indicates a message is available. ENMU ON Indica que usted está ...
3 Identificador de Llamadas El visor no muestra nada • Asegúrese que la batería esté cargada adecuadamente durante 16 horas.• Asegúrese que la batería esté adecuadamente instalada y conectada.• Cambie la batería. Asegúrese que el aparato esté conectado en un enchufe que no pueda desactivarse con un ...
3 Guía de Solución de Problemas Cuidado General del Producto Para mantener su teléfono funcionando bien y con buena apariencia, observe las siguientes pautas:• Evite poner el teléfono cerca de calentadores (calefactores) de ambiente y dispositivos que generen interferencia eléctrica ejemplo, motores...
Servicio Servicio Si usted experimenta problemas con este equipo, para reparaciones o para información de garantía, comuníquese con el departamento de servicio al cliente al 1-800-511-3180 . Si el equipo está causando daños a la red telefónica, la compañía telefónica puede pedirle que desconecte su ...
0 Información de la Garantía Garantía Limitada Lo que cubre su garantía: • Defectos de materiales o de trabajo. Por cuánto tiempo después de la compra: • Un año, a partir de la fecha de compra. (El periodo de garantía para unidades arrendadas se inicia con la primera renta o 45 días de la fecha del ...
41 • Productos comprados o que han recibido servicio fuera de los Estados Unidos.• Desastres naturales, por ejemplo y sin limitarse a ellos, daños por relámpagos. Registro del Producto: • Por favor llene y envíe por correo la Tarjeta de Registro del Producto que se embarcó con su producto. Hará más ...
2 DESCRIPTION MODEL NO. Adaptador de corriente CA (para cargador) 5-2678 Clip para cinturón 5-2679 Paquete de clip para el oído 5-2680 Paquete de banda para la cabeza 5-2681 Audífono opcional (alámbrico) 5-2588 Batería de reemplazo (NiMH para auricular) 5-2683 Batería de reemplazo (Li-polímero para ...
4 Indice A Ajuste del Audífono 13 B Banda para la cabeza accesorio 13 Batería del Audífono 33 Batería del Auricular 32 Búsqueda de Auricular a Audífono 23 C Causas de una Mala Recepción 38 Clip para Oído Accesorio 15 Código de Area Local 18 Compatibilidad con Audífonos (CCA) 3 Conexión de la Línea T...
RCA Manuals
-
RCA LED29B30RQD
User Manual
-
RCA LED40G45RQ
User Manual
-
RCA LED24G45RQD
User Manual
-
RCA LRK32G45RQ
User Manual
-
RCA 32LA45RQ
User Manual
-
RCA LED29B30RQ
User Manual
-
RCA SLD50A45RQ
User Manual
-
RCA 37LA30RQ
User Manual
-
RCA 37LA30RQ
Manual
-
RCA LED24C45RQ
User Manual
-
RCA LED24C45RQ
Manual
-
RCA LED55C55R120Q
User Manual
-
RCA LED55C55R120Q
Manual
-
RCA 26LA30RQ
User Manual
-
RCA 26LB30RQD
User Manual
-
RCA LED52B45RQ
User Manual
-
RCA LED52B45RQ
Manual
-
RCA 19LB30RQD
User Manual
-
RCA LED55B55R120Q
User Manual
-
RCA LRK50G45RQ
User Manual