Page 2 - Ceramos; CARBON DIFFUSED STEEL
12 MATERIALS HIGH-TECH CERAMIC Innovative, durable and skin-friendly: intro-duced by Rado in 1986, high-tech ceramic has become our signature. In metallic or non-metallic colors, with a glossy, matt, satin-brushed or decorated finish, it is the most versatile of our materials. HIGH-TECH HARDMETAL Pu...
Page 5 - AUTOMATIC WATCHES; To wind an automatic watch man-; SWISS PRECISION
15 you will contribute to the protection of the environment and human health. The recy-cling of the materials will help to conserve natural resources. * Valid in the EU member states and in any countries with correspond-ing legislation. AUTOMATIC WATCHES Automatic watches are precision instru-ments ...
Page 7 - LEATHER STRAPS
17 slightly soapy water and the help of a toothbrush. This cleaning is especially recommended if the watch has been in contact with salt water or cosmetics. LEATHER STRAPS Rado straps are made using leathers that were treated to achieve a special look and feel. Each piece can differ and the colour m...
Page 9 - OPERATING INSTRUCTIONS
Page 11 - THE CROWN HAS 3 POSITIONS; Push the crown back to position 1.
21 QUARTZ WATCHES WITH DATE DISPLAY CALIBERS: O73, 079, 082, 111, 113, 115*, 129*, 152, 156, 157*, 160, 161*, 212, 218, 219, 239, 256, 271, 278*, 291 * On certain models these movements have no date display (jewelry version) and only the positions 1 and 3 are functional. THE CROWN HAS 3 POSITIONS 1....
Page 14 - Activating setting mode
24 QUARTZ CERAMIC TOUCH WATCHES WITHOUT DATE DISPLAY CALIBER: 277 This watch has no crown. It is activated and the time is set by touch only. 1. Activating setting mode Activation is always a two-step process to avoid any unwanted changes in time setting. QUARTZ WATCHES WITHOUT CROWN CALIBER: 964 To...
Page 16 - b. Setting the minutes
26 2b. Setting the minutes Slide your finger along the right hand side of the case clockwise = + 1 minute or anti-clockwise = - 1 minute. - 1 mn + 1 mn 3. Confirmation / Exit setting mode Touch the case at 8 o’clock for approxi-mately 2 seconds to confirm the changes made to the time setting in step...
Page 17 - Touch the case at 10 o’clock until the
27 QUARTZ CERAMIC TOUCH WATCHES WITH A SECOND TIME ZONE WITHOUT DATE DISPLAY CALIBER: 765 This watch has no crown. It is activated andthe time is set by touch only. This watch has a 2nd Time Zone function, which is synchro-nised with the main one. TO SET THE MAIN TIME ZONE (MAIN DIAL) 1. Activating ...
Page 19 - a. Setting the hours; Touch the case at 8 o’clock, the minute
29 2. Setting the time 2a. Setting the hours Slide your finger along the left hand side of the case clockwise = + 1 houror anti-clockwise = - 1 hour. - 1 h + 1 h TO SET THE SECOND TIME ZONE (SMALL DIAL) 1. Activating setting mode 1a. Touch the case at 8 o’clock, the minute hand on the small dial mov...
Page 20 - Touch the case either at 8 o’clock (or
30 2 s TIME ZONE SWAP 1. Activating setting mode 1a. Touch the case either at 8 o’clock (or 10 o’clock), the minute hand on the small (or main) dial moves slightly. 2 s 2b. Setting the quarter hours (minimum possible time zone difference) Slide your finger along the right hand side of the case clock...
Page 21 - Immediately slide your finger along the; Swapping time zones
31 2 s 3. Confirmation / Exit setting mode Touch the case either at 8 o’clock (or 10 o’clock) for 2 seconds. The watch will emit two small beeps. Setting mode is now deactivated and the time cannot be changed accidentally. 2 s 1b. Immediately slide your finger along the right hand side of the case f...
Page 22 - Touch the case at 8 o’clock, until the; Resynchronising the minute hand
32 RESYNCHRONISING THE MINUTE HANDS If the minute hands on the small and big dials are no longer aligned you can activate a special mode to resynchronise them. 1. Activating setting mode 1a. Touch the case at 8 o’clock, until the minute hand on the small dial moves slightly from right to left. 2 s 1...
Page 24 - GPD SYSTEM
34 QUARTZ SPLIT- AND ADD-SECONDS CHRONOGRAPH WATCHES CALIBER: 289 THE WATCH IS DELIVERED IN ‘ENERGY-SAVING’ MODE The crown is extended, the hands are at twelve o’clock. The crown is extended to position 2 held by a small “black cap” around the winding stem, which needs to be removed before the first...
Page 28 - Chronograph functions; Addition function
38 At the end of the last step, the chronograph indicates the total time.Pusher B: Reset Split time function Pusher A: StartPusher B: Stop to read the split time. The chronograph continues to operate.Pusher B: RestartThe chronograph hands catch up with the elapsed time.Pusher A: For the last stop an...
Page 32 - To adjust the time; Select function 1
42 MULTIFUNCTION WATCHES CALIBERS: 193, 210 THE CROWN HAS 2 POSITIONS AND MULTIPLE FUNCTIONS Select function: Leave crown in position 1 and turn. Scroll through the 9 functions.Adjust function: Pull crown out to position 2 and turn.Turn function on/off: Press crown briefly.Set to zero: Press crown a...
Page 36 - To change language and year; Select function 8; To adjust the date; Select function 9
46 Timer memory function. Pressing the crown automatically resets the preprogrammed starting time for the count-down, and the countdown begins again. To reset countdown to zero (at any time) Press crown for at least 3 seconds. 8. To change language and year Select function 8 Pull crown out to positi...
Page 37 - To set the date
47 DIGITAL WATCHES WITH SELF-WINDING MECHANISM CALIBER: 290 THE CROWN HAS 2 POSITIONS AND MULTIPLE FUNCTIONS 1. Normal position Time display: hours and minutes.To display the date, turn the crown: the date appears for 2 seconds. 2. To set the time Pull the crown out to position 2. Display blinks.a) ...
Page 38 - POWER RESERVE/WINDING
48 SELF-WINDING WATCHES WITH DATE DISPLAY CALIBERS: 550, 557*, 561, 580, 609, 629, 656*, 657*, 658**, 661, 734*, 763***, 766, 772***, 773*** * On certain models this movement has no date display (jewelry or skeleton versions) and only the positions 1 and 3 are functional.*** This movement has a powe...
Page 39 - Short time measurement
49 3. To set the time Pull the crown out to position 3 and turn it forwards or backwards (Caliber 657* forwards only) to the desired time. Accept by pushing the crown back to position 1 to coincide with a given time signal. **Rotating bezel On certain models the rotating bezel is lo-cated under the ...
Page 42 - Only positions 1 and 3 are functional.
52 1. Normal position When pressed in against the case and screwed in, the crown ensures that the watch is water-resistant. 3. To set the time Pull the crown out to position 3. The small seconds hand will stop. Set the correct time by turning the crown forwards or backwards. Accept by pushing the cr...
Page 45 - On certain models this movement has no
55 3. To set the time Pull the crown out to position 3 and turn it forwards or backwards to the desired time. Accept by pushing the crown back to position 1 to coincide with a given time signal. Chronograph functions Timing to within 1/4th of a second for up to 12 hours. Make sure the chronograph ha...
