QSC SF-1 - Manuals

QSC SF-1 – Manual in PDF format online.

Manuals:

Manual QSC SF-1

1 Page 1
2 Page 2
3 Page 3
4 Page 4
5 Page 5
6 Page 6
7 Page 7
8 Page 8
9 Page 9
10 Page 10
11 Page 11
12 Page 12

Summary

Page 3 - SF-1 SUBWOOFER FILTER; INTRODUCTION

1 SF-1 SUBWOOFER FILTER INTRODUCTION The SF-1 Subwoofer Filter is an upper slot accessory for QSC MXa Series amplifiers, which feature LevelOne Open Input Architecture. The accessory mounts in the back of the amplifier above the standard inputpanel. Ideal for adding subwoofer amplification to an exi...

Page 4 - CONFIGURATION; Positions 1 through 4 and 9 and 10

2 CONFIGURATION SETTING THE SUBSONIC FILTER FREQUENCY The subsonic (highpass) filter on Channel 1 cannot be bypassed, and Channel 2 should only be bypassedin the bridged mono mode. Plug-in SIP resistor network RN3 sets the high-pass frequency for both channels 1 and 2. Table 2 shows the resistor val...

Page 5 - Positions 5 through 8

3 • Stereo, Bridged Mono, and Parallel Mono If the two subwoofer channels are to carry different or independent program material, as in stereoor bridged mono, set the SF-1 for “Stereo” operation. Use this also for parallel mono operation froma single program signal source. For stereo, bridged mono, ...

QSC Manuals