QSC MD-FP122/94r - Manuals

5 Input/Output Connections The active MD has a balanced 3-pin female XLR input marked IN and a male XLR output con-nector marked OUT. These connectors are wired in parallel, enabling connection of multiple enclosures in a “daisy-chain” fashion. Balanced connections are recommended for less AC hum an...

7 Dimensions NOTE! Handles are provided on black-colored enclosures only! White-colored enclosures are not equipped with handles.

8 Location of Pick Points There are fifteen (15) load-rated pick points on the MD enclosure; four each on the top and on the bottom, two each on the sides, and three on the rear of the enclo-sure. These pick points are indicated with arrowheads on the illustration. Note the pick points on the cabine...

9 Horn Rotation The coverage angles for each model, as shipped from the factory, are show in the specifications section. If desired the high-frequency driver/horn assembly can be rotated 90° in order to change the coverage angle planes. Example: An MD-FP122/64r as shipped from the factory has a nomi...

10 Specifications MD-FP122/64r MD-FP122/94r MD-FP122/124r Frequency Response, ±3dB 50-17.5k Hz 55-20k Hz 55-18.6k Hz Frequency Range, -10dB 50-18k Hz 50-20.5k Hz 50-20k Hz Maximum Peak SPL 128dB 128dB 128dB Nominal coverage, H x V 60°x40° 90°x40° 120°x40° (as installed at factory) Directivity Index ...