QSC I-YM8 - Manuals - manualsarea.com

Page 2 - Warranty; Disclaimer

EN 2 IMPORTANT SAFETY PRECAUTIONS & EXPLANATION OF SYMBOLS 1- Read these instructions.2- Keep these instructions.3- Heed all warnings.4- Follow all instructions.5- Clean only with a dry cloth.6- Install in accordance with QSC Audio Product’s instructions and a licensed, professional engineer.7- ...

Page 3 - Rotating the Waveguide to Alter HF Coverage Pattern; Logo Badge Rotation

EN 3 I-82H Introduction Thank you and congratulations on your purchase of the ISIS Series I-82H High Performance Portable Loudspeakers. This product rep-resents the state-of-the-art in lightweight sound reinforcement loudspeaker systems. To get the most from your investment, we encourage you to revi...

Page 4 - Connection; The I-82H has two Speakon

EN 4 Connection The I-82H has two Speakon ® NL4-type connectors wired for full range, passive operation. Connect the amplifier’s + and - outputs directly to the Speakon’s 1+ and 1- terminals. The two connectors are wired in parallel to make parallel cabinet connection easy. Your amplifier must be ab...

Page 5 - Mounting; Stand Alone Mounting

EN 5 Mounting Stand Alone Mounting If using the loudspeaker only, it can be set on any appropriate surface. The cabinet will lean back at a slight angle when set on a flat surface. Install the four self-adhesive rubber feet on the cabinet bottom to stabilize the loudspeaker and to help prevent it fr...

Page 6 - Optional I-YM8 Accessory Kit; Floor Monitor Use

EN 6 Optional I-YM8 Accessory Kit The I-YM8 Accessory Kit includes a yoke mount bracket, two loud-speaker retaining knobs, two swivel feet with retaining knobs, mic stand adapter, pole cup and retaining knob. The I-YM8 Accessory Kit enables you to mount the loudspeaker to most any surface using the ...

Page 7 - I-82H Loudspeaker Dimensions

EN 7 I-82H Loudspeaker Dimensions I-YM8 with I-82H Loudspeaker Dimensions

Page 8 - Specifications; Frequency Response; 13 dB SPL continuous rms output; Power Rating; recommended amp power:; Specifications are subject to change without notice.

EN 8 Specifications Frequency Response 1 : 80- 21k Hz (-6 dB) 60- 22k Hz (-10 dB) Maximum Output 2 : 113 dB SPL continuous rms output (calculated) 119 dB SPL peak output Impedance: 8 ohms nominal7.0 ohms minimum, 210 Hz 135 ohms maximum Power Rating 3 : rms (IEC 100 hrs): 200 watts rms recommended a...

Page 9 - I-82H Horizontal and Vertical Beamwidth Vs. Frequency

EN 9 Frequency (Hertz) Frequency (Hertz) Horizontal Vertical Be am wi d th ( d eg re e s) SP L ( d B) On Axis 20° Off Axis 40° Off Axis Impedance Im ped ance (oh m s) I-82H Response On-Axis, 20° Off-Axis, 40° Off-Axis, and Impedance Vs. Frequency I-82H Horizontal and Vertical Beamwidth Vs. Frequency...

Page 10 - Painting the I-82H Loudspeaker

EN 10 Painting the I-82H Loudspeaker The loudspeaker enclosure, grill, and mount can be painted to match any decor, provided the following precautions are observed. The cabinet is made of high impact polystyrene which requires controlled painting procedures in order to obtain good results. Use a pai...

Page 11 - How to Contact QSC Audio Products; 联系; QSC Audio Products

QSC Audio Products, Inc. 1675 MacArthur Boulevard Costa Mesa, California 92626 USA ©2003 “QSC” and the QSC logo are registered with the U.S. Patent and Trademark Office. Mailing address: QSC Audio Products, Inc. 1675 MacArthur Boulevard Costa Mesa, CA 92626-1468 USA Telephone Numbers: Main Number (7...