Page 2 - Warranty; Disclaimer
EN 2 IMPORTANT SAFETY PRECAUTIONS & EXPLANATION OF SYMBOLS 1- Read these instructions.2- Keep these instructions.3- Heed all warnings.4- Follow all instructions.5- Clean only with a dry cloth.6- Install in accordance with QSC Audio Product’s instructions and a licensed, professional engineer.7- ...
Page 3 - Stand Alone Mounting
EN 3 Introduction Thank you and congratulations on your purchase of the AcousticDesign AD-S52 multi-use, weather resistant loudspeakers. These products rep-resent the state-of-the-art in all-weather, lightweight SR (sound rein-forcement) loudspeaker systems. To get the most from your investment, we ...
Page 4 - Connection; Terminations; The binding post terminals will accept:; Input Connection Cover (wire termination only); •Pass the wires through the compression nut, gasket, and
EN 4 Mounting (continued) Ball Mount Adapter The included ball mount adapter can be attached to almost any flat surface. The ball mount adapter’s back plate can be removed, if desired. This will reduce the overall depth of the assembly and the footprint of the mount on the wall. To use the wall moun...
Page 5 - use the right side markings.; 00V distributed systems:; use the left side markings.; AMPLIFIER
EN 5 Wiring Connect the amplifier’s + and - outputs directly to the loud-speaker’s + (red) and - (black) terminals. The binding post terminals accept wire, spade terminals, or banana plugs. Use only wire connections when using the Input Cover. The terminals are spaced 0.75” (19 mm). Maintain proper ...
Page 6 - Specifications; Frequency Response
EN 6 Specifications Frequency Response 1 : 90- 20k Hz (-6 dB) 70- 21k Hz (-10 dB) Drivers: low frequency- 5.25” (133 mm) magnetically shielded high frequency- metallized dome, neodymium magnet structure Maximum Output 2 : 103 dB SPL continuous rms output (calculated) 106 dB SPL peak output Impedance...
Page 7 - Dimensions
Page 8 - Painting the Loudspeaker
EN 8 Painting the Loudspeaker The loudspeaker enclosure, grill, and mount can be painted to match any decor, provided the following precautions are observed. The cabinet is made of high impact polystyrene which requires controlled painting procedures in order to obtain good results. Use a paint “sys...
Page 10 - How to Contact QSC Audio Products; 联系; QSC Audio Products
QSC Audio Products, Inc. 1675 MacArthur Boulevard Costa Mesa, California 92626 USA ©2003 “QSC” and the QSC logo are registered with the U.S. Patent and Trademark Office. Mailing address: QSC Audio Products, Inc. 1675 MacArthur Boulevard Costa Mesa, CA 92626-1468 USA Telephone Numbers: Main Number (7...