Primera ADL-MAX - Manuals

Hardware and Software Set-Up and Testing 7 Section 2: Hardware and Software Set-Up and Testing A. SOFTWARE INSTALLATION Important Note: You must install the software for your Disc Publisher before you install the ADL-MAX software. The Installer Disc has a menu that will guide you through the process...

8 Hardware and Software Set-Up and Testing B. CONNECTING THE CABLES • Remove the tape securing the arm to the base plate of the Autoloader. • Locate the power cord supplied with your unit. • Plug the adapter into a surge protected outlet, and plug the power plug into the power port on the rear panel...

Hardware and Software Set-Up and Testing 9 You may see a notice like the one shown here stating that the software has not passed Windows Logo Testing. Click Continue Anyway to continue installing the driver for your Autoloader. This driver will not appear as a printer. It will be found in device man...

10 Hardware and Software Set-Up and Testing C. INSTALLING THE DISC PUBLISHER STAND • Lower the Disc Publisher Stand onto the Autoloader so that the metal tab on the stand overlaps the base plate and the holes on the stand line up with the screw holes on the base plate. • Attach the appropriate mount...

Hardware and Software Set-Up and Testing 11 • Attach the stand to the unit using the adjustment bolts and the washers. Do not tighten the bolts at this point! D. INSTALLING THE DISC PUBLISHER • Open the cover of the Disc Publisher. • Lower the Disc Publisher onto the stand. The pegs will correspond ...

12 Hardware and Software Set-Up and Testing • Install the cables, ink cartridges etc. according to the instructions in the Disc Publisher users manual. The software for the Disc Publisher should have been installed before starting the ADL-MAX setup. E. LOADING MEDIA • Load up to 100 discs in each of...

Hardware and Software Set-Up and Testing 13 F. CALIBRATING THE AUTOLOADER TO THE DISC PUBLISHER • Calibrate the arm to the Disc Publisher by opening the PrimoDVD software or the RoboPrint Software . The software will detect the ADL-MAX and prompt you to calibrate. Follow the on screen instructions t...

14 Hardware and Software Set-Up and Testing • After calibrating the Disc Publisher position by moving the stand forward or backward, make sure you tighten the mounting bolts to the stand. 510975.qxd 9/28/2006 9:39 AM Page 14 INDEX TOC

Running Your First Job 15 Section 3: Running Your First Job A. BURNING AND PRINTING THROUGH PRIMODVD When the Disc Publisher is connected to the ADL-MAX the cover must remain open at all times.Run PrimoDVD jobs just as you normally would or according to the instructions in the Disc Publisher users m...

16 Running Your First Job You may also recalibrate the ADL-MAX by clicking Calibrate ADL-MAX button. Several calibration options are available. Last Disc calibration and Bin positions will only be necessary if the Autoloader is having trouble picking from the bins. Follow the onscreen prompts to cal...

Running Your First Job 17 3. Select your SureThing label file by clicking the Browse button. 4. Enter the number of copies.5. Click Print . To recalibrate the ADL-MAX, open RoboPrint and click the Robot Options button. Click Calibrate ADL-MAX . Several Calibration Options will be available. Last Dis...

18 Running Your First Job C. CHANGING CARTRIDGES During normal operation you will be prompted to change the cartridge at the same time the low ink warning is displayed. Follow the on-screen instructions to change the cartridge.If it becomes necessary to change cartridges at a time other than when th...

Maintenance and Troubleshooting 19 Section 4: Interpreting the Autoloader's LED Status Lights The LED Status Lights are located on the front Control Panel. They can tell you a lot about what is happening at any given moment with the unit, including a number of error conditions. To accurately interpr...

20 Maintenance and Troubleshooting Section 5: Maintenance and Troubleshooting The unit is designed to operate for extended periods of time with very little attention. In fact, no regular maintenance is recommended other than cleaning the outside case. NOTE: Do NOT attempt to oil or grease the unit’s...

Technical Specifications 21 Section 6: Technical Specifications Model ADL-MAX Optional Duplicators Disc Publisher II, AutoPrinter II, Disc Publisher Pro and AutoPrinter Pro Minimum System See Disc Publisher minimum system requirements Disc Capacity 300 disc input, 300 disc output Operating Systems W...

22 Index Index AutoPrinter ......................................................................................16Cables ...............................................................................................8Calibration..........................................................................