Primera 061605-510800-(01) - Manuals

- 4 - LCD Front Panel The below image is for reference only. Your key assignment and appearance may differ. : Up (Menu/Option Scroll Up) : Down (Menu/Option Scroll Down) : Forward; Enter; OK; Execute the function : Backward; Escape; go back to the previous function : Shortcut to make a copy : Shortc...

- 5 - Tutorial Guide: I. Make Disc-to-Disc Copies This process will copy your master disc into several blank discs simultaneously. However, due to its simultaneous nature, a good conditioned master disc and lower recording speed is necessary for high success rate and good quality duplications. When ...

- 6 - Make sure it is located at “ Drive 1 ”. If not, then you need to press the UP or DOWN navigation button to search for it. c. Press “>>” to submit your selection. 2. Go back to “COPY” Menu. a. Use UP or DOWN arrow button to navigate to the following screen: 3. Start the Copy Process. a. N...

- 8 - To enter the number, you need to use UP or DOWN button to select the number for each digit and use “>>” or “<<” button to move the cursor position right or left, once you’ve finished, move the cursor to “OK” and press “>>”. For example, if I want to specify a counter value of...

- 9 - ix. Then, press “>>” once to submit your counter value. Now you shall see the following screen: OR If either one of the ABOVE 2 screens are displayed for more than 2 minutes, please check your Master Disc or Blank Discs for quality. d. Please allow 5-10 seconds for the duplicator to dete...

- 11 - Once the duplication run is completed, the successful copies will be ejected and you shall see the following screen: O Next, refill more blank media to continue making more copies, or you can press “<<” to terminate your project and go back to the main menu. If you’ve specified a counte...

- 12 - Tutorial Guide: II. Make Hard Drive(HDD)-to-Disc Copies (For Duplicator w/ HDD installed) Copying from the Hard Drive is the best way to make copies. Overall, there are 4 benefits to copying from the Hard Drive: i. Performance – Duplicating from the Hard Drive will be able to boost the DVD du...

- 13 - For example, if you have an 80GB Hard Drive with a system capacity of 74GB.* You can load 74 CDs or 19 DVDs (given a 4GB average capacity). *There are many factors that could contribute to the capacity difference between the advertised capacity and the actual capacity: 1. Hard Drive Manufactu...

- 14 - 1. Make sure the Master Reading Source is set to the Hard Drive. It is very important to make sure the Master Reading Source is set to the Hard Drive in order to avoid unnecessary error messages. To check the Master Reading Source, please do the following: a. Use UP or DOWN arrow button to na...

- 15 - a. Use UP or DOWN arrow button to navigate to the following screen. b. Press “>>” to enter Hard Drive Setup Menu and you shall see the following: c. Now, load your master disc on to the Hard Drive. To do so, use UP or DOWN arrow button to navigate to the following screen. d. Press “>...

- 17 - next position. v. Press “DOWN” button consecutively until “N” is displayed. vi. Press “>>” button once to move the cursor to the next position. vii. Now, we have the name “FUN” displayed and then, press “>>” consecutively until the cursor is moved to “OK”. viii. Then, press “>&...

- 18 - i. Once your master disc has been loaded completely, you shall see the following: Then, you can press “>>” button to go back to the Hard Drive Setup Menu. 3. Go back to “COPY” Menu. a. Press “<<” button to go back to the main menu. You shall see the following: b. Use UP or DOWN ar...

- 26 - see the following: You can press UP or DOWN button to select the desired speed and then press “>>” to submit your speed selection. 5. Once your selection has been changed successfully, you shall see the following screen for 2 seconds. Then you will be directed back to the main menu: NOT...

- 27 - Tutorial Guide: IV. Select the Master Reading Source When you try to make a copy, you need to specify where the master disc is. Is it in the Reader tray? Or is it an Image inside the Hard Drive? This tutorial will show you how to change the Master Reading Source to satisfy your needs. Basical...

- 28 - iv. Convenience – With your master discs stored inside the Hard Drive, you can have access to each one easily. There is no need to carry your master discs; they are all stored inside the duplicator. • Disc-to-Disc copy (Copy from 2nd Tray) – This is the case when your master disc is full of s...

- 30 - Tutorial Guide: V. Load Master Disc onto the Hard Drive In order to copy from the Hard Drive, you are required to load your master disc onto a hard drive partition. The number of partitions the hard drive can hold is determined by the capacity of your hard drive and the size of the partitions...

- 33 - e. Now, you have a choice to load your master disc into a new (empty) partition or overwrite one of the existing partitions (if any exists) by inputting/modifying the name you desire; or you can simply choose “Auto Generate” to have the system automatically generate a partition name for you. ...

- 37 - 5. Use UP or DOWN arrow button to find the desired partition and then press “>>” to submit your selection and you shall see the following confirmation screen: 6. Press “>>” once again to confirm it and you shall see the following: 7. Now, you can rename the partition you’ve just s...

- 38 - iii. Then, press “>>” once to submit your name selection. Once you’ve done above, you shall see the following: Then, you will be directed back to Hard Drive Setup Menu. NOTES Partition FUN2 Renamed! Hard Drive Setup 3.Rename Partition

- 40 - 5. Use UP or DOWN arrow button to find the desired partition and then press “>>” to submit your selection and you shall see the following: 6. Press “>>” to confirm and you shall see the following for 2 seconds. 7. Then, you will be directed back to Hard Drive Setup Menu. NOTES Har...

- 41 - Tutorial Guide VIII. Change the SETUP settings Most of the internal settings and information is stored inside the SETUP menu. To explore and modify them is simple. Below is an example to modify the “Auto Start” setting. Please note that the default setup is set for optimal performance of the ...

- 42 - 5. Use UP or DOWN arrow button to modify the setting to “Full” and then press “>>” to submit your selection and you shall see the following: 6. If you would like to modify more settings, then please go back to step 3. Otherwise, press “<<” button to bring you back to main menu. NO...

- 43 - Tutorial Guide: IX. Audio CD Editing This process will guide you to perform the Audio Track Selection feature. This process will help you combine audio tracks from various CDs into a single customized audio CD. In order for the duplicator to do all those things, you need a temporary storage l...

- 45 - 3. Once you made your selection, you shall see the following: OR When you see above, please insert an audio CD that contains your favorite track(s) in the Master Reading Tray and a blank CD-R media into one of Writer Trays. If either one of the ABOVE 2 screens is shown for more than 2 minutes...

- 46 - You can press “>>” button to submit your selection. You will see the following: If the capacity of total audio tracks you have selected is more than your blank CD-R disc’s capacity, you shall see the following two screens flashing: If you see messages above, please press “>>” butt...

- 48 - and you shall see the following: Then, you will be directed back to the main menu: Example of Editing Audio Tracks to Hard Drive (For Duplicators with Hard Drive Installed): We need to create a new Audio CD from 2 different Discs. CD1: song 2, and song 4 CD2: song 3, song 4 and song 5 1. Go t...

- 49 - 5. Wait until the following screen appears. 6. Use the UP or DOWN arrow button until you see “Track 2” on the 2 nd line, and then press “>>” to confirm. A “*” symbol will appear on the left of “Track 2” like following: 7. Use the UP or DOWN arrow button until you see “Track 4” on the 2 ...

- 50 - 10. Once the loading process is complete, you shall see the following screen: 11. Since you have not done with your selections yet, you need to press DOWN button once and you shall see following: 12. Press “>>” button to continue and insert CD2 into the reader tray. When CD2 is inserted...

- 51 - 15. Use the UP or DOWN arrow button until you see “Track 5” on the 2 nd line, and then press “>>” to confirm. A “*” symbol will appear on the left of “Track 5” like following: 16. Use the UP or DOWN arrow button until you see following: 17. Press “>>” Once you submit your selectio...

- 52 - 20. Press “>>” button again to confirm the finalization and you shall see the following screen: 21. When the whole process completes, your mixed copy will be ejected and you shall see the following: Then, you will be directed back to the main menu: Job Completed! Press OK to Finish Proc...

- 53 - Tutorial Guide X. Introduction to Account Management Feature This feature allows you, the administrator, to have the power to: 1. Create user accounts and passwords to prevent unauthorized use of this duplicator. 2. View existing user account lists 3. Edit existing user account information, i...

- 54 - information 3. Enable the Account Management feature by turning ON the “Password on Boot UP” setting. Please refer to Feature Overview “5. Password on Bootup” below for more information. This duplicator comes with standard license which allows you to create up to 32 users. However, if you des...

- 55 - By default, the Administrator’s Password is “0000”. To enter that, press UP or DOWN button to select the first digit of your password and press “>>” button to submit the current digit and you will be guided to select the next digit. Repeat above steps until you’ve selected all digits of...

- 58 - Tutorial Guide XI. Introduction to Duplication Mode In order to achieve 8x or higher DVD duplication performance; there are 3 factors that need to be certified as 8x or higher speed: 1. Master Disc Reading Speed 2. Computer Controlling Speed 3. Recorder Writing Speed* *The recordable DVD medi...

- 61 - following: Press “>>” button once. You shall see following: Press UP or DOWN Button Consecutively until you see following: Press “>>” button once. You shall see following: Press UP or DOWN Button Consecutively to select your desired mode. Press “>>” button once to submit you...

- 65 - Menu Overview: 1. COPY This menu will guide you to make CD/DVD/BD copies. Before you enter this menu to copy, please make sure you have selected the correct Master Reading Source. For more information, please refer to “ Tutorial Guide I – Make Disc-to- Disc Copies ” or “Tutorial Guide II – Ma...

- 73 - Trouble Shooting 1. No display on LCD or the unit does not operate when the power is on.  Check the connection of power cable and the environment of power outlet is normal.  Make sure the power voltage matches the voltage of your power outlet.  If the duplicator was stored in a location wh...

- 74 - 5. The failure rate is high.  Lower the “write speed” and try again. Please refer to “ Tutorial III – Select the Duplication Speed .”  Quality of blank disc may be poor.  Quality of your master disc may be poor. 6. Do I need to upgrade my duplicator’s firmware?  Unless your system is gett...

- 76 - Error Code Typically the system will show an error message and error code if a problem occurs. Please reference the below diagram for a description of the error codes and the recommend solution: Error Code Error Message Recommendation 200 Master Disc Empty Blank Disc is in the Source Tray. Ma...