Premier Mounts USA - Manuals

USA Installation Instructions Page - 5 - Thread Depth Indicator 1. Insert the thread depth indicator (supplied) through the thread inserts found on the back of the flat panel to make sure the inserts measure the same full depth and mark it (Figure 1). 2. Locate the correct diameter screw for the thr...

USA Page - 6 - Installation Instructions Support Tube Installation NOTE : Please refer to the base installation instructions for the assembly of the base and the support tubes. The support tubes and base must already be assembled. NOTE : If the optional shelf has been purchased, the shelf must be at...

USA Installation Instructions Page 7 Installing the Display on the Support Tubes WARNING : THE FOLLOWING STEPS MUST BE PERFORMED USING THREE PEOPLE. FAILURE TO DO SO WILL RESULT IN PHYSICAL DAMAGE TO THE DISPLAY AND/OR THE PERSONNEL PERFORMING THESE STEPS. 1. Two people, one on each side, must pick ...

USA Page 8 Installation Instructions 3. Once the mounting points are aligned with the lower USA mounting bracket, place a Griplate™ over each mounting point (flat side down) and secure them using the appropriate hardware (see Page 6). 4. At this time, tighten all hardware. WARNING : THREE PEOPLE MUS...