Premier Mounts UFM - Manuals

Premier Mounts UFM – Manual in PDF format online.

Manuals:

Manual

Manual Premier Mounts UFM

Summary

Page 3 - Description; Assembly drawing; Dimensions are in Inches and (

- 3 - 16.000(406.4) 16.000 (406.4) 1.943(49.3) 5.000 (127) 28.000 (171.2) CL 3.500 (88.9) CL 5.000 (127) 16.000(406.4) 24.290 (616.97) 16.000 (406.4) 21.790 (553.4) 1.245 (31.75) A B C D E F G H B A F H 21.790 (553.4) Description A. Wall plate B. Mounting brackets C. Griplate™ D. Mounting hardware E...

Page 4 - Flat panel list

- 4 - Flat panel list Hitachi EIKI Electrograph Gateway 32HDT20,CMP307XJ,CMP307XU,32HDT20 CMP401HDU, CMP402HDE, CMP402HDU, CMP4120HDU,CMP4121,CMP4121HDU,CMP4201U, CMP4202U, 42HDW10,42HDT20, 42HDT50, 42HDT55 M6 x 12 CMP5000WXU, CMP5003WXU, 50HDT50, 50HDT55: M8 X 20 PLD32: M5 x 20 - ¼” nylon spacers (...

Page 6 - Parts list

- 6 - (Qty 8) (Qty 8) M6 x 12 M5 x 50 M5 x 16 M5 x 25 M5 x 20 M5 x 12 M4 x 25 M4 x 16 M8 x 70 M8 x 35 (Qty 4) (Qty 4) (Qty 6) (Qty 4) (Qty 6) M8 x 30 M8 x 25 (Qty 4) M8 x 20 (Qty 6) (Qty 6) (Qty 6) (Qty 4) (Qty 8) M6 x 20 (Qty 6) Parts list This wall mount is shipped with all proper installation har...

Page 7 - Nylon sleeves; Nylon spacers and flat washers; The nylon spacers may be staked to achieve proper spacing.

- 7 - 1/4" Nylon spacers 5/16" Flat washers (metal) 1" Nylon spacers 1/4" Nylon spacers 9/16" Nylon spacers (large) (small) 1/2" Nylon spacers (large) Nylon sleeves (Qty 6) (Qty 12) (Qty 6) (Qty 6) (Qty 6) (Qty 6) (Qty 4) Nylon spacers and flat washers Parts list (con’t) The ...

Page 9 - Checking the thread depth on your flat panel; DO NOT USE

- 9 - Checking the thread depth on your flat panel Inverted flat panel display Thread insert Thread depth indicator Figure 2 Figure 3 Figure 1 Marking the depth 1. Insert the thread depth indicator (supplied) through the thread inserts found on the back of the flat panel to make sure the inserts mea...

Page 10 - CL; Finding center of the flat panel display; Once the flat panel is inverted, use a measuring tape to

- 10 - CL L C Finding center of the flat panel display Once the flat panel is inverted, use a measuring tape to find the center of your flat panel measuring from outside to outside of the chassis. See figure 1. Using a pencil lightly mark the center of your flat panel. See figure 2. Inverted flat pa...

Page 11 - Positioning the mounting brackets; Lay the left and right mounting

- 11 - Positioning the mounting brackets Inverted flat panel Nylon spacers if Applicable (see chart) on page 4 and 5 Center mark Bottom of flat panel Install the nylon spacers to the mounting points on the flat panel see figure 3. Lay the left and right mounting brackets (stamped arrows facing out)....

Page 13 - Securing the mounting brackets; EXAMPLE: If your plasma uses M8 x 20 Phillip

- 13 - DIMPLES FACING UP 3/4" DIMPLES FACING UP DIMPLES FACING DOWN DIMPLES FACING DOWN Securing the mounting brackets The Griplates™ have M4, M5 M6 and M8 hole patterns to fit the hardware that your flat panel requires. EXAMPLE: If your plasma uses M8 x 20 Phillip screws. Use the M8 mounting po...

Page 14 - Finding the wood studs behind the wall structure

- 14 - 16" 16" Finding the wood studs behind the wall structure Using a (commercially available) wood stud finder, locate the 16" or 24" stud centers behind the wall. Once found, make a pencil marking on the center of the wood studs. See figure 9. Measure from the floor to the desire...

Page 15 - Marking the mounting points on the wall

- 15 - 16" 16" Marking the mounting points on the wall Place the bottom portion of the wall plate to the reference line and mark the four (4) lag bolt mounting points through the wall plate slots on the wall. Level the wall plate with the reference arrow pointing up to the ceiling. See figur...

Page 16 - Securing the wall plate to wood studs; Use a minimum diameter of 5/16” x 3” long wood

- 16 - Securing the wall plate to wood studs Wall plate (4) 5/16" x 3" lag bolts and (4) flat washers (supplied) Level and secure the plate to the wall with the reference arrow facing up to the ceiling. Secure the plate using the four (4) 5/16" lag bolts and flat washers (supplied). See ...

Page 17 - Securing the wall plate to a concrete wall

- 17 - Securing the wall plate to a concrete wall Level and secure the plate to the wall with the reference arrow facing up to the ceiling. Use a min dia of 5/16” x 2 ¼” lg concrete wedge anchors (commercially available). See figure 14. Use a minimum diameter of 5/16” x 2 ¼” long wedge anchors (comm...

Page 18 - Securing the flat panel to the wall mount; TOP

- 18 - AT LEAST (2) QUALIFIED PERSONNEL ARE STRONGLY RECOMMENDED FOR INSTALLATION OF THIS PRODUCT. FAILURE TO DO SO COULD RESULT IN SERIOUS INJURY AND POSSIBLE DAMAGE TO THE FLAT PANEL. Securing the flat panel to the wall mount Raise the flat panel with the LEFT and RIGHT mounting brackets secured t...

Page 19 - Lateral shift; Lateral shift adjustment; Do not over tighten the 1⁄4”-20 screws to the rods.

- 19 - Make any lateral shift adjustment and lock it by tightening the two (2) ¼”-20 Phillips screws found on the bottom of the mounting brackets. Use the foot leveler to adjust your plasma. See figure 16 Lateral shift To remove the display from the wall simply back off the ¼”-20 screws using a Phil...

Page 20 - What and Who is Covered by this Limited Warranty and for How Long; Mounts; How State Law Applies; Warranty

- 20 - PREMIER MOUNTS LIMITED LIFETIME WARRANTY What and Who is Covered by this Limited Warranty and for How Long Premier Mounts warrants this product to be free from defects in material and workmanship for the lifetime of the original installation of this product. The limited warranty is valid only...