Premier Mounts RFM - Manuals

Page 6 Installation Instructions Thread Depth Indicator 1. Insert the thread depth indicator (supplied) through the thread inserts found on the back of the fl at panel to make sure the inserts measure the same full depth and mark it (Figure 1).2. Locate the correct diameter screw for the thread inse...

Installation Instructions Page 7 Mount Installation RFM Determine where the mount lo-cation will be. Use a stud finder to locate the nearest wall stud. Once the stud has been located, use a pencil to mark the spot. Using a 1/4” drill bit, drill the upper mount-ing hole where the mark was made. Step ...

Page 8 Installation Instructions Concrete Mounting Concrete anchors must be used for concrete installation. They can be purchased at your local hardware store. The mounting surface must be a minimum 6” thick. For the two upper mounting points, the Griplate™ flat side must be facing up. For the two l...

Display Orientation The RFM will allow the user to adjust the display a full 360°. Page 10 Installation Instructions RFM BEFORE ROTATING THE RFM, MAKE SURE THAT THE M6 KNURL KNOB IS SECURELY FASTENED TO THE RFM. ALSO, PLEASE MAKE SURE YOU ALLOW ENOUGH CABLE AND WIRE CLEARANCE FOR FULL ROTATION. 1. T...

Warranty Installation Instructions Page 11 RFM PREMIER MOUNTS LIMITED LIFETIME WARRANTY What and Who is Covered by this Limited Warranty and for How Long Premier Mounts warrants this product to be free from defects in material and workmanship for the lifetime of the original owner of this product. T...