Premier Mounts PSM-442F - Manuals

Page 2 - Contents

2 o Safety & precautions o Mount diagrams o Parts List o Optional Adapters o Installing the mounting bracket o Installing the mount o Electrical o Securing the mount o Additional security o Ceiling structure assembly drawing (pg 6) Plasma display manufacturers are constantly improving their prod...

Page 3 - Safety & Precautions

3 The wall or ceiling structure must be capable of supporting at least five (5) times the weight of plasma display. If not, the wall or ceiling must be reinforced. Proper installation procedure by qualified personnel as outlined in the installations instructions must be adhered to. Failure to do so ...

Page 4 - Mount Diagrams

4 10.750 4.500 1.750 0.688 4.500 14.324 12.000 2.125 0.750 0.104 1.528 1.528 0.500 0.375 Ø0.375 (x4) Ø2.500 a b c d 16.000 19.500 8.750 8.750 17.500 2.125 16.000 5.460 1.250 3.250 16.000 4.500 1.750 18.500 1.125 8.000 8.000 5.000 1.000 4.500 5.460 2.865 3.500 e c A b 19.771 F d UNIVERSAL FLAT MOUNT ...

Page 5 - Parts List

5 Standard hardware PSM-Series Mounting hardware PSM-Mount o Phillips screwdriver o Drill gun o Soft material or a blanket o Pencil o ¼" drill bit o Level o Measuring tape o Wrench with a 1/2" socket o Stud finder o 1/4"-3/8" Toggler bolts : Used for hollow concrete block wall mounti...

Page 7 - Installing the mounting bracket

7 Step 1 CAUTION : The plasma displays are fragile and heavy. At least two (2) qualified personnel are strongly recommended for the installation of this product. Invert the plasma display and set it on a soft, flat surface to prevent any damage to the plasma display. See fig 1. WARNING : Proper inst...

Page 8 - Installing the mounts

8 16" floor floor Installing the mounts Step 3 Securing the flat mount CAUTION : The plasma displays are fragile and heavy. At least two (2) qualified personnel are strongly recommended for the installation of this product. All plasma models vary depending on the manufacturer and some are center...

Page 9 - Electrical

9 floor floor Electrical Step 4 All electrical wiring components should be installed at this time to ensure that the plasma display has enough power sources. Securing the flat mount or tilt mount To determine the desired viewing height, use the center slot opening in the wall mount as a center refer...

Page 10 - Securing the mount; Additional security

10 Securing the mount Plasma display PSM-series mount Universal flat mount Securing tabs Tab openings Wall structure Plasma display Wall structure Align the tabs and push the plasma as shown on arrows to lock in place Locked tab Caution : All four (4) receiving tab openings from the mounting bracket...

Page 11 - PANASONIC MODELS; HARDWARE NOTICE; PACK 2; USED ON THE FOLLOWING

PANASONIC MODELS HARDWARE NOTICE PACK 2 USED ON THE FOLLOWING MODELS PACK 28 USED ON THE FOLLOWING MODELS 42" TH42PWD4UY, TH42PWD4EX, PT42P1, 42PD2, TH42PWD3U, TH42PHD5U, PT42PD4, PT42PHD4P, TH42PWD5UY, TH42PW5UZ, TH42PWD6UY 50" TH50PHD3U, PT50PD3P, TH50PHD3E, TH50PHW3, TH50PD4, TH50PHD5UY, ...

Page 12 - N E W H A R D W A R E; The nylon sleeves and 1⁄2” nylon spacers must; ALWAYS; be used in order to install plasma bracket on to the; Nylon sleeves

N E W H A R D W A R E CAUTION! The nylon sleeves and ½” nylon spacers must ALWAYS be used in order to install plasma bracket on to the plasma. Failure to do so will result in damaging the plasma internally. This application is required by the plasma manufacture. Nylon sleeves ½" Nylon spacers AS...