Premier Mounts PCM-MS2 - Manuals

Page 2 - Installation Manual; Table of Contents

PCM-MS2 Installation Manual Page - 2 - Table of Contents Warning Statements ........................................................................................................................................- 2 - Parts List ..........................................................................

Page 3 - Parts List

PCM-MS2 Page - 3 - Installation Manual Parts List This wall mount is shipped with all proper installation hardware and components. Make sure that none of these parts are missing and/or damaged before beginning installation. If there are parts missing and/or damaged, please stop the installation and ...

Page 5 - Thread Depth Indicator; inserts measure the same full depth and mark it.; Universal Spacers Installation

PCM-MS2 Page - 5 - Installation Manual Thread Depth Indicator Step 1 . Insert the thread depth indicator (supplied) through the thread inserts found on the back of the flat panel to make sure the inserts measure the same full depth and mark it. Step 2 . Locate the correct diameter screw for the thre...

Page 6 - Finding the Center of the Flat Panel Display; CL; Positioning the Mounting Brackets

PCM-MS2 Installation Manual Page - 6 - Finding the Center of the Flat Panel Display Proper installation procedure by qualified personnel as outlined in the installation instructions must be adhered to. Failure to do so could result in personal injury and possible damage to the flat panel. Invert the...

Page 7 - Dimples; If your flat panel uses M8 x 20 Phillip screws, use the M8

PCM-MS2 Page 7 Installation Manual Align the Mounting Brackets InvertedFlat Panel L C Mounting Bra cket Center of Viewing Guide Cente r Line Bottom ofFlat Panel Step 3. Match the center of viewing guide with the center line you marked in step 1. The mounting brackets are designed with a center viewi...

Page 8 - Wall Plate End Covers Installation; SN; Wall Stud Location

PCM-MS2 Installation Manual Page 8 Wall Plate End Covers Installation SN AP Step 1. Place the upper and lower wall plates on a flat surface. Step 2. Align the wall plate end cover with the wall plate center rods (see illustration above). Step 3. Attach the wall plate end cover to the upper and lower...

Page 9 - Level the wall plate with the reference arrow pointing up; Completed Installation Diagram

PCM-MS2 Page 9 Installation Manual 16" Step 5. Level the wall plate with the reference arrow pointing up to the ceiling. Step 6. Drill eight (8) ¼" pilot holes to the marked wall. Step 7. Secure the upper and lower wall plates using the eight (8) 5/16" lag bolts and flat washers. Do NOT ...

Page 10 - Securing the Flat Panel to the Wall Mount; Raise the flat panel with the secured mounting

PCM-MS2 Installation Manual Page 10 Securing the Flat Panel to the Wall Mount AT LEAST (2) PEOPLE ARE STRONGLY RECOMMENDED TO LIFT AND SECURE THE FLAT PANEL TO THE WALL PLATE. FAILURE TO DO SO COULD RESULT IN SERIOUS INJURY AND POSSIBLE DAMAGE TO THE FLAT PANEL. Step 1. Raise the flat panel with the...

Page 11 - Lateral Shift Adjustment; Make any lateral shift adjustment and lock it by; Installing the Safety Knurl Knobs; Tilt the flat panel and secure the two (2)

PCM-MS2 Page 11 Installation Manual Lateral Shift Adjustment Step 1. Make any lateral shift adjustment and lock it by tightening the two (2) M6 x 30mm (supplied) to the bottom of the mounting brackets. LATERAL SHIFT Installing the Safety Knurl Knobs Step 1. Tilt the flat panel and secure the two (2)...

Page 12 - Technical Specifications

PCM-MS2 Installation Manual Page 12 Technical Specifications All measurements are in inches(mm).

Page 13 - Warranty; PREMIER MOUNTS; What and Who is Covered by this Limited Warranty and for How Long; Mounts; How State Law Applies

PCM-MS2 Page 13 Installation Manual Warranty PREMIER MOUNTS LIMITED LIFETIME WARRANTY What and Who is Covered by this Limited Warranty and for How Long Premier Mounts warrants this product to be free from defects in material and workmanship for the lifetime of the original owner of this product. The...