Premier Mounts AM3 - Manuals

Page 2 - Warning Statements

Page 2 Installation Instructions Table of Contents PREMIER MOUNTS DOES NOT WARRANT AGAINST DAMAGE CAUSED BY THE USE OF ANY PREMIER MOUNTS PRODUCT FOR PURPOSES OTHER THAN THOSE FOR WHICH IT WAS DESIGNED OR DAMAGE CAUSED BY UNAUTHORIZED ATTACH-MENTS OR MODIFICATIONS, AND IS NOT RESPONSIBLE FOR ANY DAM...

Page 3 - Parts List

Installation Instructions Page 3 Parts List This wall mount is shipped with all proper installation hardware and components. Make sure that none of these parts are missing and/or damaged before beginning installation. If there are parts missing and/or damaged, please stop the installation and contac...

Page 5 - The nylon spacers may be stacked to achieve proper spacing.; Nylon sleeves

Installation Instructions Page 5 The nylon spacers may be stacked to achieve proper spacing. 5/16" Flat washers (metal) 1/4" Nylon spacers (Qty 8) (small) (Qty 8) 1/2" Nylon spacers 1/4" Nylon spacers (Qty 12) (large) (Qty 8) (large) (Qty 8) Nylon sleeves 9/16" Nylon spacers (Qty...

Page 6 - Thread Depth Indicator

Page 6 Installation Instructions Thread Depth Indicator 1. Insert the thread depth indicator (supplied) through the thread inserts found on the back of the fl at panel to make sure the inserts measure the same full depth and mark it (Figure 1).2. Locate the correct diameter screw for the thread inse...

Page 7 - Mount Orientation; Once the side has been determined, attach the mount to the wall.; Figure 4; Left Side Orientation; Figure 5

Installation Instructions Page 7 WHEN MOUNTING THE AM3, THE SIDE THAT THE SWINGOUT ARM IS LOCATED ON MUST HAVE A LAG BOLT MOUNTED ON AT LEAST ONE SIDE (SEE FIGURE 1), TOP AND BOTTOM. Mount Orientation The AM3/AM3-B Plasma Mount has the built-in capability of mounting with the swingout arm on either ...

Page 8 - Mount Installation; Figure 6; /16” x 3” Lag Bolts and Washers; Concrete Mount Installation; . Insert a concrete anchor into each hole.

Page 8 Installation Instructions Mount Installation AM3/AM3-B Before proceeding with the mount installation, you should already have the mounting holes pre-drilled. Please use the template (supplied) and follow the instructions. For ease of installation, it is recommended that two people perform the...

Page 9 - Nose Piece Orientation; Figure 7

Installation Instructions Page 9 AM3/AM3-B Nose Piece Orientation Step 1 . Once the mount has been oriented and mounted to the wall, remove the nose piece by removing the tensions bolts. After loosening the tension bolts, be sure that the nose piece is held together tightly before rotating. Step 2 ....

Page 10 - Universal Mounting Bracket Assembly; Dimples; Figure 9; Installation Instructions

AM3/AM3-B Universal Mounting Bracket Assembly Step 1 . Place the universal bracket bar and the universal brackets on a flat surface. Step 2 . Slide the universal brackets onto the universal bracket bar (as shown in Figure 9) with the set screws facing up. At this time, do not tighten the set screws ...

Page 11 - Attaching the Display; Universal Bracket; Installation

AM3/AM3-B Attaching the Display ONCE THE UNIVERSAL BRACKET BAR ASSEMBLY HAS BEEN ATTACHED TO THE DISPLAY, IT IS RECOMMENDED THAT TWO PEOPLE MOUNT THE DISPLAY, AS THE UNIT IS HEAVY AND, IF DROPPED, WILL DAMAGE THE MOUNT, THE DISPLAY, AND/OR PERSONNEL. Figure 10 Figure 11 Step 1 . Slide the display as...

Page 12 - Securing the Display; Universal

AM3/AM3-B Page 12 Installation Instructions Securing the Display Once the two units have been secured together, the two (2) M6 x 30mm Phillips Head locking screws must be installed in the noted location (Figure 14) to prevent any movement. Figure 14 Universal Bracker Bar M6 x 30mm Phillips Head Scre...

Page 13 - Tilt Positioning; To Tilt the Display; Cable Access Holes

AM3/AM3-B Installation Instructions Page 13 Tilt Positioning To adjust the display, loosen the tension bolts no more than ½ turn, make the adjustments and then tighten the tension bolts. When tilt positioning is needed to adjust the display, place a hand at the top corner of the display and the othe...

Page 14 - Technical Specification

AM3/AM3-B Page 14 Installation Instructions Technical Specification All measurements are in inches(mm).

Page 15 - Premier

AM3/AM3-B Installation Instructions Page 15 Warranty PREMIER MOUNTS LIMITED LIFETIME WARRANTY What and Who is Covered by this Limited Warranty and for How Long Premier Mounts warrants this product to be free from defects in material and workmanship for the lifetime of the original owner of this prod...