Premier Mounts AM250-FLIP - Manuals

Page 2 - Warning Statements; Page 2; Table of Contents

AM 250 PRIOR TO THE INSTALLATION OF THIS PRODUCT, THE INSTALLATION INSTRUCTIONS SHOULD BE READ AND COMPLETELY UNDERSTOOD. THE INSTALLATION INSTRUCTIONS MUST BE READ TO PREVENT PERSONAL INJURY AND PROPERTY DAMAGE. KEEP THESE INSTALLATION INSTRUCTIONS IN AN EASILY ACCESSIBLE LOCATION FOR FUTURE REFERE...

Page 3 - Parts List; Installation Tools

AM250 Installation Instructions Page 3 Parts List This mount is shipped with all installation hardware and components. Make sure that none of these parts are missing and/ or damaged before beginning installation. If there are parts missing and/or damaged, please stop and contact Premier Mounts (800)...

Page 4 - Installation Instructions

AM250 Page 4 Installation Instructions M4 x 16 (Qty 8) (Qty 8) M5 x 12 M5 x 16 (Qty 6) M5 x 25 (Qty 4) M6 x 12 (Qty 8) M8 x 25 (Qty 6) M8 x 30 (Qty 6) M8 x 35 (Qty 4) M6 x 20 (Qty 6) M8 x 70 (Qty 4) M4 x 25 M5 x 20 M5 x 50 M8 x 20 M6 x 30 (Qty 6) (Qty 4) (Qty 6) (Qty 4) (Qty 6) Parts List (Cont.)

Page 6 - Thread Depth Indicator; the inserts measure the same full depth and mark it (Figure 1).; Figure 1

Page 6 Installation Instructions AM250 Thread Depth Indicator Step 1. Insert the thread depth indicator (supplied) through the thread inserts found on the back of the flat panel to make sure the inserts measure the same full depth and mark it (Figure 1). Step 2. Locate the correct diameter screw for...

Page 7 - Mount Installation; rail and two 3” lag bolts for the lower rail.; THE FOLLOWING STEPS SHOULD BE PERFORMED BY TWO PEOPLE.; injury or damage to property.

AM250 Installation Instructions Page 7 For ease of installation, it is recommended that two people perform the installation. One person should hold the mount while the other person installs the lag bolt and washer. Making sure that the mount is level, the person not holding the mount must mark and d...

Page 8 - Dimples

AM250 Page 8 Installation Instructions Universal Mounting Bracket Assembly Step 1. Place the display on a soft, flat surface, face-down. Step 2. Determine where the mounting points are located. Step 3. Place the universal brackets over the mounting points. If the mounting surface is not completely l...

Page 9 - Attaching the Display

AM250 Installation Instructions Page 9 Attaching the Display IT IS RECOMMENDED THAT TWO PEOPLE MOUNT THE DISPLAY, AS THE UNIT IS HEAVY AND, IF DROPPED, WILL DAMAGE THE MOUNT, THE DISPLAY, AND/OR PERSONNEL. Step 1. Place the universal brackets and the display over the upper mounting bars of the AM250...

Page 10 - Securing and Leveling the Display; DESIRED TENSION.; To Tilt the Display Forward; display to tilt forward.; To Tilt the Display Back; Lower Locking Point

AM250 Page 10 Installation Instructions Securing and Leveling the Display Once the brackets have been placed over the upper mounting bars on the AM250, use two (2) M6 x 30mm Phillips Head locking screws to secure the brackets to the bottom of the mounting bars. This will prevent lateral shift moveme...

Page 11 - Technical Specifications

AM250 Installation Instructions Page 11 Technical Specifications All measurements are in inches (mm). 14.03(356.36) 16.00(406.40) 1.50(38.04) 3.55(90.17) 28.00(711.20) 28.79(731.79) 3.00(76.20) 12.53(317.5) 20.40(510.54) 27.00(685.80) 29.64(752.86)

Page 12 - will be shipped to you at no charge, but you must pay any labor costs.

AM250 Page 12 Installation Instructions Warranty PREMIER MOUNTS LIMITED LIFETIME WARRANTY What and Who is Covered by this Limited Warranty and for How Long Premier Mounts warrants this product to be free from defects in material and workmanship for the lifetime of the original installation of this p...