Page 2 - SECTION
PRODUCT SPECIFICATIONS Power . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 950 WVoltage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 120 VHertz . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60 HzAmperage . . . . . . ....
Page 3 - GENERAL SAFETY RULES
GENERAL SAFETY RULES 1 WARNING For your own safety, read and understand all warnings and operating instructions before using any tool or equipment. WARNING Your Powertec planer is designed and engineered to plane wood or wood products. Planing of steel or other ferrous materials is a fire hazard and...
Page 4 - SPECIFIC SAFETY RULES FOR PLANER; SAVE ALL WARNINGS AND INSTRUCTIONS
SPECIFIC SAFETY RULES FOR PLANER 2 Be aware of general power tool safety. Make sure all the safety rules are understood.• Wait for the cutter to stop before setting the tool down. An exposed rotating cutter may engage the surface, leading to possible loss of control and serious injury. • Hold power ...
Page 5 - UNPACKING; Refer to Figure 1; ATTACHING DUST EXTRACTION; Refer to Figure 2; Figure 2; ADJUSTING THE DEPTH OF CUTTING; Refer to Figure 3; WARNING; Figure 3
ASSEMBLY 3 ASSEMBLY 3 UNPACKING Refer to Figure 1 • Examine shipping carton for freight damage before opening. If shipping carton is damaged file a claim with the carrier immediately. • Carefully remove all contents from shipping carton. The shipping carton contains: 1 - Planer 1 - Parallel Fence (b...
Page 6 - PARALLEL FENCE; Refer to Figure 4; Figure 4; POWER SOURCE; GROUNDING INSTRUCTIONS; CAUTION; Guidelines for using extension cords; AMPERAGE
ASSEMBLY 4 PARALLEL FENCE Refer to Figure 4 WARNING Turn switch OFF, remove the plug from the power source outlet and wait until the blades have come to a complete standstill before making any adjustments or removing or installing accessories. • Assemble the parallel fence to the bracket using the b...
Page 7 - SWITCHING ON AND OFF; Refer to Figure 5; Figure 5; Refer to Figure 6; PLANING; Refer to Figure 6
OPERATION 5 SWITCHING ON AND OFF Refer to Figure 5 CAUTION Before connecting to the power supply, always make sure the trigger switch and trigger lock work properly. The tool is equipped with a trigger lock to avoid unintentional start-ups. To turn the planer on, press the trigger lock and then sque...
Page 8 - CHAMFERING; Refer to Figure 7; Figure 7; Figure 8; Align Blade; MAINTENANCE; REMOVING OR INSTALLING PLANER; Refer to Figure 8–9
CHAMFERING Refer to Figure 7 To make a chamfered cut, align the “V” grooves in the front shoe of the planer with the corner edge of the workpiece.• Adjust to desired depth of cut.• Place the “V” groove on the front adjustable shoe over the edge being beveled. Place weight on the depth adjustment kno...
Page 9 - LUBRICATION; Figure 9; REPLACING THE DRIVE BELT; Refer to Figure 10
times to make sure the belt is even on both pulleys. • Replace the drive belt cover and secure in place with the four screws. Tighten screws. • Connect to the power supply and switch the planer on, run for one minute to make sure the motor and new belt work properly. Figure 10 Drive Belt Cover LUBRI...
Page 11 - NOTE
Page 12 - PLANER PARTS ILLUSTRATION
Page 13 - PLANER PARTS LIST
PLANER PARTS LIST 11 Key No. Part No. Description Qty Specification Key No. Part No. Description Qty Specification PARTS LIST 11 1 HP1005001 Screw 27 ST4.0x16 2 HP1005002 Belt cover 1 PA6-GF30 3 HP1005003 Bearing cover 1 PA6-GF30 4 HP1005004 Screw 4 ST4.2x10 5 HP1005005 Stator 1 φ 73x50 6 HP1005006 ...
Page 14 - POWERTEC
WARRANTY 12 WARRANTY 12 Thank you for investing in a POWERTEC power tool. This product has been designed and manufactured to meet high quality standards and is guaranteed for domestic use against defects in workmanship or material for a period of 12 months from the date of purchase. This guarantee d...
Page 16 - Southern Technologies, LLC
Southern Technologies, LLC 3816 Hawthron CT, Waukegan, IL 60087
