Page 2 - Read these instructions carefully before you use the Nailer.
2 Always wear approved front and side EYE PROTECTION when operating this Nailer. Others in the work area should also wear front and side EYE PROTECTION . Eye protection will help guard against flying nails and debris, which could cause severe eye injury. EAR PROTECTION may be required to prevent hea...
Page 3 - FLEX Foot Adjustment:; Raise or lower the FLEX to your wood sample.
ADAPTER FOOT LOCATING EAR 3 FLEX Foot Adjustment: Wood varies from one manufacturer to the next. The different wood profiles may be due to height and length of the flooring tongue and whether or not there is a nail pocket.First, loosen the two hex bolts under the FLEX foot with the Allen Wrench supp...
Page 4 - We will not be; We will not be responsible for oil stains.; WARNING
4 WARNING Whenever air is connected to the Nailer, keep body parts away from the nail discharge path. Disconnect the air line before making adjustments or repairs on the Nailer. Only connect air to an unloaded Nailer so as to prevent accidental discharge.Consult the drawing for the appropriate adapt...
Page 7 - REASSEMBLING THE NAILER:
For Step-by-Step Videos and Instructions, Visit our Web Site at www.Powernail.com 7 Piston Rod U-Cup Lip Seal (#24): 1. Remove the old U-Cup Lip Seal from the seal groove with a bent paper clip or pick using care not to scratch the inside walls of the seal groove with the wire hook.2. Clean out the ...
Page 8 - MODELS 445 POWER ROLLER PARTS LIST; DESCRIPTION; AVAIL
KEY: S=Sold Separately, A= Sold as part of assembly, F=Factory replacement only, K=Sold as part of a Kit MODELS 445 POWER ROLLER PARTS LIST ITEM PART NO. DESCRIPTION QTY REQ TU OVH AVAIL 1 09-445-29701 BODY 1 F 2 09-445-29702 CAP 1 S 3 09-445-29703 HANDLE, LONG 1 A-6 4 09-445-29703.1 HANDLE, SHORT 1...
Page 9 - Model 445 Power Roller Assemblies, Kits and Accessories
For this parts list and other Powernailer schematics, please visit the Powernail Parts Store at http://www.powernail.com Model 445 Power Roller Assemblies, Kits and Accessories ITEM # PART NO. DESCRIPTION QTY REQ TU OVH AVAIL 58 09-445-29758 1/4” SPLIT RING LOCK WASHER (FOOT) 4 S 59 09-445-29759 3/8...
Page 10 - Seal Placement
Seal Placement 10 6 TO CLEAR A NAIL JAM (continued): 3. Separate the Foot and gate with a screw driver just enough to clear out the jammed nail. 4. Put thread locking compound on all screws and reassemble the components.
Page 11 - SCHEMATIC - Model 445 POWER ROLLER; Videos and Instructions,
94 76 78 79 72 73 71 83 89 86 92 93 87 94 71 75 50 58 82 88 84 81 91 54 56 11 SCHEMATIC - Model 445 POWER ROLLER FLEX Power Roller Conversion Parts. For Step-by-Step Videos and Instructions, Visit our Web Site at www.Powernail.com
Page 12 - POWERCLEATS LENGTH DETERMINATION CHART
POWERCLEATS LENGTH DETERMINATION CHART This chart will assist you in determining the proper length of Powercleats to use for various thicknesses of flooring. Approximate vertical penetration of the Powercleat under the hardwood floor is shown for each application. This is only a guide. Results shoul...
Page 13 - POWERNAILER TROUBLE SHOOTING CHART
13 PROBLEM POSSIBLE CAUSE SOLUTION 1 Driving blade does not retract 1. Zero or Low air pressure Check air supply for 70 psi minimum to 110 psi maximum 2. Lack of lubrication Manually lubricate through male air inlet fitting 3. Excessive dirt inside nailer Disassemble and clean 4. Bent or burred driv...
