Powermatic COS18 - Manuals - manualsarea.com

Page 3 - TABLE OF CONTENTS

3 TABLE OF CONTENTS Safety Rules ............................................................................................................................................... 4-5 Safety Decals ............................................................................................................

Page 4 - SAFETY RULES

4 ! SAFETY RULES As with all machines, there is a certain amount of hazard inv olv ed with the use of this cut-off saw. Use the machine with the respect and caution demanded where safety precautions are concerned. W hen normal safety precautions are ov erlooked or ignored, personal injury to the ope...

Page 6 - SAFETY; FIGURE 1

6 ! SAFETY Familiarize yourself with the location and content of these decals on your machine. FIGURE 1

Page 8 - FIGURE 2

Page 10 - ELECTRICAL CONNECTIONS; WARNING: Electrical connections must

10 ELECTRICAL CONNECTIONS WARNING: Electrical connections must be made by a qualified electrician in compliance will all relevant codes. The machine must be properly grounded to help prevent electrical shock and possible death. A power plug is not prov ided with the COS18. You may either connect one...

Page 11 - DUST COLLECTION; WARNING: Never attempt to open blade

11 DUST COLLECTION Powermatic recommends the use of a dust collection system with this cut-off saw. The collector should hav e sufficient capacity (600 CFM) for this size machine. Mount the dust collector v ia a 4" hose to the outlet on the blade access door. OPERATING CONTROLS Control buttons a...

Page 15 - ADJUSTMENTS

15 5. Now place the board flush against the fence and against the rail of the roller table(s). If necessary, shift a roller table horizontally to bring it in line with the fence. 6. W hen final adjustments hav e been made and re-checked on the roller tables, tighten all screws/nuts connecting the ro...

Page 16 - BELT REPLACEMENT; OPERATION

16 BELT REPLACEMENT 1. Release tension on the v -belt and remov e old belt. 2. Make sure the new belt is properly situated into the v -groov es of the pulley. 3. Tension new belt. OPERATION WARNING: Do not place your hands close to the guard/clamp at any time during operations. All guards must be in...

Page 17 - OPTIONAL ACCESSORIES - COS18 Cut-Off Saw; Description

17 OPTIONAL ACCESSORIES - COS18 Cut-Off Saw Part No. Description 6827037 ............. 8' Roller Table 6827038 ............. 4' RollerTable 6080157 ............. Blade, 18" 120T, 1" Bore 6080158 ............. Premium Blade, 18", 120T, 1" Bore

Page 32 - Optional Accessory

32 PARTS LIST: 4' Roller Table Assembly (COS18 Cut-Off Saw) #6827038 Optional Accessory Index Part No. No. Description Size Qty. 1 ......... COS18-501 .............. Roller Table ............................................ 4’........................................ 1 2 ......... COS18-502 ............

Page 39 - Preventive Maintenance; Checklist for Model COS18 Cut-Off Saw

39 Preventive Maintenance Checklist for Model COS18 Cut-Off Saw [ ] W ork area around machine marked off clearly. [ ] Non-skid floor strips in area where operator normally stands. [ ] Inspect entire machine for loose bolts, nuts, screws. Tighten and replace as necessary. [ ] Clean table area, remov ...