Poulan PRO SM210VS - Manuals

-- 6 -- 1. Insert the tip of a screwdriver into the latch area of the vacuum inlet. Latch Area Blower Outlet Vacuum Inlet Cover Latch Area 2. Gently tilt the handle of the screwdriver to- ward the front of the unit to release the latch while pulling up on the vacuum inlet cover with your other hand....

-- 7 -- OPERATION KNOW YOUR BLOWER READ THIS INSTRUCTION MANUAL AND SAFETY RULES BEFORE OPERATING YOUR UNIT. Compare the illustrations with your unit to familiarize yourself with the location of the various controls and adjustments. Save this manual for future reference. MULCHING BLADES Your blower ...

-- 8 -- S To reduce noise levels, operate power blowers at the lowest possible throttle speed to do the job. S Use rakes and brooms to loosen debris be- fore blowing. S In dusty conditions, slightly dampen sur- faces or use a mister attachment when wa- ter is available. S Conserve water by using pow...

-- 9 -- Throttle Position Lever (Cruise Control) 2. Slowly press the primer bulb 6 times. 3. Move the start lever to the START position. Start Lever Starter Handle Primer Bulb 4. Pull starter rope handle sharply until en- gine starts and runs. 5. Allow unit to run for 10--15 seconds, then ful- ly sq...

-- 11 -- To adjust idle speed: Allow engine to idle. Adjust speed until engine runs without stalling (idle speed too slow). S Turn idle speed screw clockwise to in- crease engine speed if engine stalls or dies. S Turn idle speed screw counterclockwise to decrease engine speed. Air Filter Cover Idle ...