Poulan PRO 952711961 - Manuals

Page 3 - IDENTIFICATION OF SAFETY SYMBOLS

3 IDENTIFICATION OF SAFETY SYMBOLS When servicing unit, use only identical replacement parts. Never allow children to operate this unit. Store unit indoors in a high, dry place out of the reach of children. Always stop unit and disconnect spark plug before clean- ing or servicing. WARNING: Fire haza...

Page 4 - OPTIONAL ATTACHMENTS; SAFETY RULES; OPERATOR SAFETY

4 OPTIONAL ATTACHMENTS Cutting attachment / guard, Powerhead model Attachments Type part. no. Trimmer head TNG 7 537419214 / 530071824 Brushcutter attachment PP4000C 952711610 Attachments Type Part. no. Edger attachment PP1000E 952711607 Cultivator attachment PP2000T 952711608 Blower attachment PP30...

Page 5 - ADDITIONAL SAFETY RULES; FOR OPTIONAL ATTACHMENTS

5 S Use only in daylight or good artificial light. S Use only for jobs explained in this manual (or manuals for optional attachments). UNIT / MAINTENANCE SAFETY S Disconnect the spark plug before perform- ing maintenance except carburetor adjust- ments. S Look for and replace damaged or loose parts ...

Page 8 - SNOW THROWER SAFETY

8 WARNING: Falling objects can cause severe head injury. Wear head protec- tion when operating this unit with a pole prun- er attachment. WARNING: To prevent serious inju- ry, do not use more than one boom extension with a pole pruner attachment. WARNING: Keep the pruner away from power lines or ele...

Page 9 - ASSEMBLY; INSTALLING TRIMMER ATTACH-

9 ASSEMBLY WARNING: If received assembled, repeat all steps to ensure your unit is properly assembled and all fasteners are secure. Examine parts for damage. Do not use dam- aged parts. NOTE: If you need assistance or find parts missing or damaged, call 1-800-554-6723. It is normal for the fuel filt...

Page 10 - OPERATION; HELPFUL TIP

10 OPERATION KNOW YOUR TRIMMER READ THIS INSTRUCTION MANUAL AND SAFETY RULES BEFORE OPERATING YOUR UNIT. Compare the illustrations with your unit to familiarize yourself with the location of the various controls and adjustments. Save this manual for future reference. Line limiter blade Primer bulb A...

Page 12 - OPERATING INSTRUCTIONS; OPERATING POSITION

12 2. Position locking/release button of attach- ment into guide recess of coupler. 3. Push the attachment into the coupler until the locking/release button snaps into the primary hole. 4. Before using the unit, tighten the knob se- curely by turning clockwise. Coupler Primary hole Upper shaft Locki...

Page 13 - MAINTENANCE

13 S During light duty cutting. S Near objects around which the line can wrap such as small posts, trees or fence wire. S For mowing or sweeping, use full throttle for a good clean job. TRIMMING -- Hold the bottom of the trimmer head about 3 inches (8 cm) above the ground and at an angle. Allow only...

Page 14 - SERVICE AND ADJUSTMENTS; REPLACING THE LINE

14 Air Filter Air Filter Cover Knob MUFFLER AND SPARK ARREST- ING SCREEN WARNING: The muffler on this prod- uct contains chemicals known to the State of California to cause cancer. As your unit is used, carbon deposits build up on the muffler and spark arresting screen. For normal homeowner use, how...

Page 16 - STORAGE

16 REPLACING THE TRIMMER HEAD 1. Hold the dust cup with a wrench to keep the shaft from turning while removing and installing trimmer head. Dust Cup 2. Remove trimmer head by turning coun- terclockwise (looking from bottom of unit). 3. Thread replacement trimmer head onto the shaft by turning clockw...