Poulan PRO 545212832 - Manuals

Page 2 - IDENTIFICATION OF SAFETY SYMBOLS

2 IDENTIFICATION OF SAFETY SYMBOLS WARNING: This unit can be dangerous! Careless or improper use can cause serious injury. Read the operator’s manual before use. Failure to follow instructions could result in serious injury. Save operator’s manual. WARNING: The blade continues to spin after the trig...

Page 3 - DANGER; OPERATOR SAFETY

3 IDENTIFICATION OF SAFETY SYMBOLS Hazard zone for thrown objects. D Blade/trimmer line can throw objects violently. D You and others can be blinded/injured. D Keep children, bystanders, and animals 50 feet (15 meters) away. Blade/trimmer line can throw objects violently. You can be blinded or injur...

Page 4 - ASSEMBLY

4 contacting any object. Hold the unit by hand; do not use the shoulder strap for support. S Keep others away when making carburetor adjustments. S Use only recommended Poulan PRO ac- cessories and replacement parts. S Have all maintenance and service not ex- plained in this manual performed by an a...

Page 6 - CONFIGURING YOUR UNIT

6 Spacer Tabs LOWER SHOULDER STRAP CLAMP Spacer Tabs positioned for use on 1 ″ (2.5 cm) diameter upper shaft 1. Place the upper shoulder strap clamp over the upper shaft above the handlebar. 2. Position the lower shoulder strap clamp under the upper shaft and align the upper and lower clamp screw ho...

Page 7 - BLADE

7 To remove metal shield, loosen and remove the four mounting screws. See ATTACHING THE METAL SHIELD and INSTALLATION OF THE METAL BLADE for illustrations. Be sure to store all parts and instructions for future use. INSTALLATION OF THE TRIMMER HEAD NOTE: Before installing the trimmer head, make sure...

Page 9 - OPERATION

9 OPERATION KNOW YOUR BRUSHCUTTER ATTACHMENT READ THIS INSTRUCTION MANUAL AND SAFETY RULES BEFORE OPERATING YOUR BRUSHCUTTER ATTACHMENT. Compare the illustrations with your unit to familiarize yourself with the location of various controls and adjustments. Save this manual for future reference. Blad...

Page 12 - MAINTENANCE

12 S Cut only at full throttle. The blade will have maximum cutting power and is less likely to bind or stall. S “Feed” the blade deliberately and not too rapidly. The blade can thrust away if it is fed too rapidly. S Cut only from your left to your right. Cutting on right side of the shield will th...

Page 13 - SERVICE AND ADJUSTMENTS; REPLACING THE LINE; STORAGE; SEASONAL STORAGE

13 SERVICE AND ADJUSTMENTS REPLACING THE LINE 1. Remove spool by firmly pulling on tap but- ton. 2. Clean entire surface of hub and spool. 3. Replace with a pre-wound spool, or cut two lengths of 12-1/2 feet of 0.080 ″ (2 mm) di- ameter Poulan PRO brand line. WARNING: Never use wire, rope, string, e...

Page 14 - LIMITED WARRANTY

14 LIMITED WARRANTY Poulan PRO , a division of Husqvarna Consum- er Outdoor Products N.A., Inc., warrants to the original consumer purchaser that each new Poulan PRO brand gasoline tool or attachment is free from defects in material and workmanship and agrees to repair or replace under this war- ran...