Page 2 - SAFETY RULES; OPERATOR SAFETY
2 SAFETY RULES WARNING: When using gardening appliances, basic safety precautions must al- ways be followed to reduce the risk of fire and serious injury. Read and follow all instruc- tions. This power unit can be dangerous! Operator is responsible for following instructions and warnings on unit and...
Page 3 - EDGER SAFETY
3 S Keep others away when making carburetor adjustments. S Use only recommended Poulan PRO accessories and replacement parts. S Have all maintenance and service not explained in this manual performed by an authorized service dealer. FUEL SAFETY S Mix and pour fuel outdoors. S Keep away from sparks o...
Page 6 - SNOW THROWER SAFETY; ASSEMBLY; INSTALLING TRIMMER ATTACH-
6 S Stop the unit immediately if you feel excessive vibration. Vibration is a sign of trouble. Inspect thoroughly for loose nuts, bolts or damage before continuing. Contact an authorized service dealer for repair or replacement of affected parts as necessary. SNOW THROWER SAFETY WARNING: Keep hands ...
Page 7 - OPERATION; KNOW YOUR UNIT
7 Coupler Primary Hole Upper Shaft Locking/ Release Button Lower Attachment Guide Recess WARNING: Make sure the locking/ release button is locked in the primary hole and the knob is securely tightened before op- erating the unit. All attachments are designed to be used in the primary hole unless oth...
Page 8 - HELPFUL TIP
8 ON/OFF SWITCH The ON/OFF switch is located on the trigger handle and is used to stop the engine. Move the switch to the OFF position to stop the engine. PRIMER BULB The PRIMER BULB removes air from the car- buretor and fuel lines and fills them with fuel. This allows you to start the engine with f...
Page 10 - OPERATING INSTRUCTIONS; OPERATING POSITION
10 WARNING: Make sure the locking/ release button is locked in the primary hole and the knob is securely tightened before op- erating the unit. All attachments are designed to be used in the primary hole unless otherwise stated in the applicable attachment instruction manual. Using the wrong hole co...
Page 11 - MAINTENANCE
11 Scalping MOWING -- Your trimmer is ideal for mowing in places conventional lawn mowers cannot reach. In the mowing position, keep the line parallel to the ground. Avoid pressing the head into the ground as this can scalp the ground and damage the tool. Mowing SWEEPING -- The fanning action of the...
Page 12 - SERVICE AND ADJUSTMENTS
12 INSPECT MUFFLER AND SPARK ARRESTING SCREEN WARNING: The muffler on this prod- uct contains chemicals known to the State of California to cause cancer. As your unit is used, carbon deposits build up on the muffler and spark arresting screen and must be removed to avoid creating a fire haz- ard or ...
Page 13 - Idle Speed Adjustment; STORAGE; SEASONAL STORAGE; ENGINE
13 Idle Speed Adjustment Allow engine to idle. Adjust speed until engine runs without trimmer head, blade or optional attachment moving or spinning (idle too fast) or stalling (idle speed too slow). S Turn idle speed screw clockwise to increase engine speed if engine stalls or dies. S Turn idle spee...
Page 14 - LIMITED WARRANTY
14 TROUBLE CAUSE REMEDY Engine will not start. 1. ON/OFF switch in OFF position. 2. Engine flooded. 3. Fuel tank empty. 4. Spark plug not firing. 5. Fuel not reaching carburetor. 6. Carburetor requires adjustment. 1. Move ON/OFF switch to the ON position. 2. See “Starting a Flooded Engine” in Operat...
Page 15 - EMISSION CONTROL WARRANTY STATEMENT
15 In Canada, contact: Poulan PRO 5855 Terry Fox Way Mississauga,Ontario L5V3E4 Giving the model number, serial number and date of purchase of your product and the name and address of the authorized dealer from whom it was purchased. THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, AND YOU MAY HAVE OT...