Page 2 - UL CLASSIFIED PRODUCT NOTICE; SAFETY RULES; OPERATOR SAFETY
2 UL CLASSIFIED PRODUCT NOTICE Only the following Gasoline Powered Combination Gardening Appliance powerhead models and their respective attachments have been Classified by Underwriters Laboratories, Inc., in accordance with the applicable safety requirements. Powerhead including trimmer attachment ...
Page 6 - SNOW THROWER SAFETY
6 WARNING: To prevent serious injury, do not use more than one boom extension with a pole pruner attachment. WARNING: Keep the pruner away from power lines or electrical wires. S Only use for pruning limbs or branches overhead up to 4 inches (10 cm) in diameter. S Do not operate the unit faster than...
Page 7 - ASSEMBLY; INSTALLING TRIMMER ATTACH-
7 ASSEMBLY WARNING: If received assembled, repeat all steps to ensure your unit is properly assembled and all fasteners are secure. Examine parts for damage. Do not use dam- aged parts. NOTE: If you need assistance or find parts missing or damaged, call 1-800-554-6723. It is normal for the fuel filt...
Page 8 - OPERATION; HELPFUL TIP
8 OPERATION KNOW YOUR UNIT READ THIS INSTRUCTION MANUAL AND SAFETY RULES BEFORE OPERATING YOUR UNIT. Compare the illustrations with your unit to familiarize yourself with the location of the various controls and adjustments. Save this manual for future reference. Line Limiter Blade Primer Bulb Assis...
Page 10 - OPERATING INSTRUCTIONS; OPERATING POSITION
10 Coupler Primary Hole Upper Shaft Locking/ Release Button Attachment Guide Recess WARNING: Make sure the locking/ release button is locked in the primary hole and the knob is securely tightened before op- erating the unit. All attachments are designed to be used in the primary hole unless otherwis...
Page 11 - MAINTENANCE; CHECK FOR LOOSE
11 Tip of the line does the cutting. Right Wrong Line crowded into work area. S The line will easily remove grass and weeds from around walls, fences, trees and flower beds, but it also can cut the tender bark of trees or shrubs and scar fences. S For trimming or scalping, use less than full throttl...
Page 12 - SERVICE AND ADJUSTMENTS
12 S Debris Shield -- Discontinue use of unit if debris shield is damaged. INSPECT AND CLEAN UNIT AND DE- CALS S After each use, inspect complete unit for loose or damaged parts. Clean the unit and decals using a damp cloth with a mild deter- gent. S Wipe off unit with a clean dry cloth. CLEAN AIR F...
Page 14 - STORAGE; SEASONAL STORAGE; ENGINE
14 STORAGE WARNING: Perform the following steps after each use: S Allow engine to cool before storing or trans- porting. S Store unit and fuel in a well ventilated area where fuel vapors cannot reach sparks or open flames from water heaters, electric motors or switches, furnaces, etc. S Store unit w...