Page 2 - UL CLASSIFIED PRODUCT NOTICE; SAFETY RULES; OPERATOR SAFETY
2 UL CLASSIFIED PRODUCT NOTICE Only the following Gasoline Powered Combination Gardening Appliance powerhead models and their respective attachments have been Classified by Underwriters Laboratories, Inc., in accordance with the applicable safety requirements. Powerhead including trimmer attachment ...
Page 3 - ADDITIONAL SAFETY RULES; FOR OPTIONAL ATTACHMENTS
3 UNIT / MAINTENANCE SAFETY S Disconnect the spark plug before perform- ing maintenance except carburetor adjust- ments. S Look for and replace damaged or loose parts before each use. Look for and repair fuel leaks before use. Keep in good working condition. S Replace trimmer head parts that are chi...
Page 6 - SNOW THROWER SAFETY
6 WARNING: To prevent serious inju- ry, do not use more than one boom extension with a pole pruner attachment. WARNING: Keep the pruner away from power lines or electrical wires. S Only use for pruning limbs or branches up to 4 inches in diameter. S Do not operate the unit faster than the speed need...
Page 7 - ASSEMBLY; INSTALLING TRIMMER ATTACH-
7 ASSEMBLY WARNING: If received assembled, repeat all steps to ensure your unit is properly assembled and all fasteners are secure. Examine parts for damage. Do not use dam- aged parts. NOTE: If you need assistance or find parts missing or damaged, call 1-800-554-6723. It is normal for the fuel filt...
Page 8 - OPERATION; HELPFUL TIP
8 OPERATION KNOW YOUR TRIMMER READ THIS INSTRUCTION MANUAL AND SAFETY RULES BEFORE OPERATING YOUR UNIT. Compare the illustrations with your unit to familiarize yourself with the location of the various controls and adjustments. Save this manual for future reference. Line Limiter Blade Primer Bulb As...
Page 9 - HOW TO START YOUR UNIT; STARTING A COLD ENGINE (or a
9 ON/OFF Switch HOW TO START YOUR UNIT WARNING: Avoid any contact with the muffler. A hot muffler can cause serious burns. HELPFUL TIP If your engine still does not start after following these instructions, please call 1-- 800-- 554--6723. STARTING A COLD ENGINE (or a warm engine after running out o...
Page 10 - OPERATING INSTRUCTIONS; OPERATING POSITION
10 If the unit still doesn’t start, refer to TROUBLESHOOTING TABLE or call 1-800-554-6723. OPERATING THE COUPLER This model is equipped with a coupler which enables optional attachments to be installed. The optional attachments are: MODEL: Edger PP1000E . . . . . . . . . . . . . . . . . . . . . . . ...
Page 12 - MAINTENANCE; SERVICE AND ADJUSTMENTS
12 MAINTENANCE WARNING: Disconnect the spark plug before performing maintenance except for carburetor adjustments. HELPFUL TIP IMPORTANT: Have all repairs other than the rec- ommended maintenance described in the instruction manual performed by an authorized service dealer. If any dealer other than ...
Page 13 - STORAGE; SEASONAL STORAGE; ENGINE
13 Hub Line in Notch Line in Notch Line exit holes 5. Wind the line evenly and tightly onto the spool. Wind in the direction of the arrows found on the spool. 6. Push the lines into the notches, leaving 3 to 5 inches (7 -- 12 cm) unwound. 7. Insert the lines into the the exit holes in the hub as sho...