Poulan PRO 545047544 - Manuals

Page 2 - IDENTIFICATION OF SYMBOLS; Starting Reminder; SAFETY RULES; PLAN AHEAD

2 IDENTIFICATION OF SYMBOLS WARNING! This chain saw can be dangerous! Careless or improper use can cause serious or even fatal injury. Read and understand the instruction manual before using the chain saw. Always use two hands when operating the chain saw. WARNING! Contacting the guide bar tip with ...

Page 3 - Kickback

3 Snug Fitting Clothing Safety Shoes Safety Chaps Heavy Duty Gloves Eye Protection Hearing Protection Safety Hat S Keep all parts of your body away from the chain when the engine is running. S Keep children, bystanders, and animals a minimum of 30 feet (10 meters) away from the work area. Do not all...

Page 6 - CKA without chain brake; ASSEMBLY; ATTACHING THE BAR & CHAIN

6 Computed kickback angle (CKA) Table BAR P/N Length CHAIN P/N 18 ″ MODEL CKA without chain brake SM4218 AV 33 _ 952051338 952044926 NOTE: If this saw is to be used for com- mercial logging, a chain brake is required and shall not be removed or otherwise dis- abled to comply with Federal OSHA Regula...

Page 7 - CHAIN TENSION

7 CUTTERS MUST FACE IN DIIRECTION OF ROTATION Tip of Bar Cutters Depth Gauge Drive Links 6. Place chain over and behind the clutch retainer, fitting the drive links in the clutch drum sprocket. 7. Fit bottom of drive links between the teeth in the sprocket in the nose of the guide bar. 8. Fit chain ...

Page 8 - OPERATION

8 OPERATION KNOW YOUR CHAIN SAW READ THIS INSTRUCTION MANUAL AND SAFETY RULES BEFORE OPERATING YOUR CHAIN SAW. Compare the illustrations with your unit to familiarize yourself with the location of the various controls and adjustments. Save this manual for future reference. Chain Adjustment Tool (Bar...

Page 9 - To stop the engine; HELPFUL TIP

9 BEFORE STARTING ENGINE WARNING: Be sure to read the fuel handling information in the safety rules sec- tion of this manual before you begin. If you do not understand the fuel handling information do not attempt to fuel your unit. Seek help from someone that does understand the in- formation or cal...

Page 10 - STARTING A WARM ENGINE

10 IGNITION SWITCH ON STOP Choke Lever 1. Move ON/STOP switch to the ON posi- tion. 2. Slowly press primer bulb 6 times. 3. Pull choke/fast idle lever out to the full extent (to the FULL CHOKE position). 4. Pull the starter rope sharply 5 times with your right hand. Then, proceed to the next step. N...

Page 11 - OPERATING TIPS; It is recommended that; TREE FELLING TECHNIQUES; Plan a clear retreat path; FELLING LARGE TREES

11 OPERATING TIPS S Check chain tension before first use and after 1 minute of operation. See CHAIN TENSION in the ASSEMBLY section. S Cut wood only. Do not cut metal, plastics, masonry, non-wood building materials, etc. S Stop the saw if the chain strikes a foreign object. Inspect the saw and repai...

Page 13 - LIMBING AND PRUNING; all the way through

13 1 st Cut 2 nd Cut Using a log for support 2 nd Cut 1 st Cut 1 st Cut 2 nd Cut Using a support stand 1 st Cut 2 nd Cut LIMBING AND PRUNING WARNING: Be alert for and guard against kickback. Do not allow the moving chain to contact any other branches or objects at the nose of the guide bar when limb...

Page 14 - SERVICE; MAINTENANCE SCHEDULE

14 SERVICE WARNING: Disconnect the spark plug before performing maintenance except for carburetor adjustments.We recommend all service and adjustments not listed in this manual be performed by an authorized or Master Service Dealer. HELPFUL TIP IMPORTANT: Have all repairs other than the rec- ommende...

Page 16 - STORAGE; IMPORTANT

16 REPLACE SPARK PLUG The spark plug should be replaced each year to ensure the engine starts easier and runs better. Ignition timing is fixed and non- adjustable. 1. Loosen 3 screws on cylinder cover. 2. Remove the cylinder cover. 3. Pull off the spark plug boot. 4. Remove spark plug from cylinder ...

Page 17 - ENGINE

17 HELPFUL TIP During storage of your gas/ oil mixture, the oil will sepa- rate from the gas. We recommend that you shake the gas can weekly to insure proper blending of the gas and oil. ENGINE S Remove spark plug and pour 1 teaspoon of 40:1, 2-cycle engine oil (air cooled) through the spark plug op...

Page 18 - LIMITED WARRANTY; Poulan PRO; EMISSION CONTROL WARRANTY STATEMENT; YOUR WARRANTY RIGHTS AND OBLIGA-

18 LIMITED WARRANTY ELECTROLUX HOME PRODUCTS, INC., warrants to the original purchaser that each new Poulan PRO R brand gasoline chain saw is free from defects in material and workmanship and agrees to repair or replace under this warranty any defective gasoline chain saw as follows from the origina...