Poulan PRO 530163516 - Manuals

Page 2 - UL CLASSIFIED PRODUCT NOTICE; SAFETY RULES; OPERATOR SAFETY

2 UL CLASSIFIED PRODUCT NOTICE Only the following Gasoline Powered Combination Gardening Appliance powerhead modelsand their respective attachments have been Classified by Underwriters Laboratories, Inc., inaccordance with the applicable safety requirements.Powerhead including trimmer attachment PP1...

Page 3 - UNIT / MAINTENANCE SAFETY; FUEL SAFETY; ADDITIONAL SAFETY RULES; FOR OPTIONAL ATTACHMENTS

3 UNIT / MAINTENANCE SAFETY S Disconnect the spark plug before perform-ing maintenance except carburetor adjust-ments. S Look for and replace damaged or looseparts before each use. Look for and repairfuel leaks before use. Keep in good workingcondition. S Replace trimmer head parts that arechipped, ...

Page 5 - POLE PRUNER SAFETY

5 WARNING: Only use brushcutter at- tachments that provide a metal shield withproboscis nose. Proboscis nose S Use only specified blade and make sure it isproperly installed and securely fastened. S Cut from your left to your right. Cutting onthe right side of the shield will throw debrisaway from t...

Page 6 - SNOW THROWER SAFETY

6 WARNING: To prevent serious inju- ry, do not use more than one boom extensionwith a pole pruner attachment. WARNING: Keep the pruner away from power lines or electrical wires. S Only use for pruning limbs or branches upto 4 inches in diameter. S Do not operate the unit faster than thespeed needed ...

Page 7 - ASSEMBLY; ATTACHING SHIELD

7 ASSEMBLY WARNING: If received assembled, repeat all steps to ensure your unit is properlyassembled and all fasteners are secure.Examine parts for damage. Do not use dam-aged parts. NOTE: If you need assistance or find parts missing or damaged, call 1-800-554-6723.It is normal for the fuel filter t...

Page 8 - OPERATION

8 OPERATION KNOW YOUR TRIMMER READ THIS INSTRUCTION MANUAL AND SAFETY RULES BEFORE OPERATING YOUR UNIT.Compare the illustrations with your unit to familiarize yourself with the location of the various controlsand adjustments. Save this manual for future reference. Line LimiterBlade Shield TrimmerHea...

Page 11 - CUTTING METHODS

11 S Tap the bottom of the trimmer head lightly onthe ground one time. Approximately 2 inches(5 cm) of line will be advanced with each tap. Always tap the trimmer head on a grassyarea. Tapping on surfaces such as concreteor asphalt can cause excessive wear to thetrimmer head.If the line is worn down...

Page 12 - MAINTENANCE; CLEAN AIR FILTER; SERVICE AND ADJUSTMENTS; REPLACING THE LINE

12 MAINTENANCE WARNING: Disconnect the spark plug before performing maintenance exceptfor carburetor adjustments. CHECK FOR LOOSEFASTENERS AND PARTS S Spark Plug Boot S Air Filter S Housing Screws S Assist Handle Screw S Debris Shield CHECK FOR DAMAGED ORWORN PARTS Contact an authorized service deal...

Page 13 - STORAGE

13 REPLACING THE CUTTING HEAD 1. Align hole in the dust cup with the hole inthe side of the gearbox by rotating thedust cup. 2. Insert a small screwdriver into alignedholes. This will keep the shaft from turn-ing while removing and installing trimmerhead. Screwdriver 3. While holding the screwdriver...

Page 15 - LIMITED WARRANTY; EMISSION CONTROL WARRANTY STATEMENT

15 LIMITED WARRANTY ELECTROLUX HOME PRODUCTS, INC.,warrants to the original purchaser that eachnew Poulan PRO r brand gasoline tool or at- tachment is free from defects in material andworkmanship and agrees to repair or replaceunder this warranty any defective gasolineproduct or attachment as follow...