Poulan PRO 115156226 - Manuals

Page 3 - IDENTIFICATION OF SAFETY SYMBOLS

3 IDENTIFICATION OF SAFETY SYMBOLS When servicing unit, use only identical replacement parts. Never allow children to operate this unit. Store unit indoors in a high, dry place out of the reach of children. Always stop unit and disconnect spark plug before clean- ing or servicing. WARNING: Fire haza...

Page 4 - OPTIONAL ATTACHMENTS; SAFETY RULES; OPERATOR SAFETY

4 OPTIONAL ATTACHMENTS Cutting attachment / guard, Powerhead model Attachments Type part. no. Trimmer head WE fixed line 545053902 / 545003325 Brushcutter attachment PPB4000C 952711828 Attachments Type Part. no. Edger attachment PPB1000E 952711825 Cultivator attachment PPB2000T 952711826 Pruner atta...

Page 8 - SNOW THROWER SAFETY

8 WARNING: Falling objects can cause severe head injury. Wear head protec- tion when operating this unit with a pole prun- er attachment. WARNING: To prevent serious injury, do not use more than one boom extension with a pole pruner attachment. WARNING: Keep the pruner away from power lines or elect...

Page 9 - ASSEMBLY; INSTALLING TRIMMER ATTACH-

9 ASSEMBLY WARNING: If received assembled, repeat all steps to ensure your unit is properly assembled and all fasteners are secure. Examine parts for damage. Do not use dam- aged parts. NOTE: If you need assistance or find parts missing or damaged, call 1-800-554-6723.It is normal for the fuel filte...

Page 10 - OPERATION; HELPFUL TIP

10 ADJUSTING THE HANDLE WARNING: When adjusting the han- dle, be sure it remains above the safety label and below the mark or arrow on the shaft. 1. Loosen wing nut on handle. 2. Rotate the handle on the shaft to an up- right position; retighten wing nut. OPERATION KNOW YOUR UNIT READ THIS INSTRUCTI...

Page 12 - OPERATING INSTRUCTIONS; OPERATING POSITION

12 1. Loosen the coupler by turning the knob counterclockwise. Attachment Coupler Knob LOOSEN TIGHTEN 2. Press and hold the locking/release button. Locking/Release Button Coupler Upper Shaft Attachment 3. While securely holding the engine and upper shaft, pull the attachment straight out of the coup...

Page 13 - MAINTENANCE; CHECK FOR LOOSE

13 Tip of the line does the cutting. Right Wrong Line crowded into work area. S The line will easily remove grass and weeds from around walls, fences, trees and flower beds, but it also can cut the tender bark of trees or shrubs and scar fences. S For trimming or scalping, use less than full throttl...

Page 14 - SERVICE AND ADJUSTMENTS

14 S Fuel Tank -- Discontinue use of unit if fuel tank shows signs of damage or leaks. S Debris Shield -- Discontinue use of unit if debris shield is damaged. INSPECT AND CLEAN UNIT AND DECALS S After each use, inspect complete unit for loose or damaged parts. Clean the unit and decals using a damp ...

Page 15 - STORAGE; SEASONAL STORAGE

15 Screwdriver 3. While holding the screwdriver in position, remove trimmer head by turning clock- wise (looking from bottom of unit). 4. Thread replacement trimmer head onto the shaft by turning counterclockwise. Tighten until secure. 5. Remove the screwdriver. CARBURETOR IDLE SPEED ADJUSTMENT WARN...