Poulan PRO 115156126 - Manuals

Page 3 - IDENTIFICATION OF SAFETY SYMBOLS

3 IDENTIFICATION OF SAFETY SYMBOLS When servicing unit, use only identical replacement parts. Never allow children to operate this unit. Store unit indoors in a high, dry place out of the reach of children. Always stop unit and disconnect spark plug before clean- ing or servicing. WARNING: Fire haza...

Page 4 - OPTIONAL ATTACHMENTS; SAFETY RULES; OPERATOR SAFETY

4 OPTIONAL ATTACHMENTS Cutting attachment / guard, Powerhead model Attachments Type part no. Trimmer head TNG 7 537419214 / 530071824 Brushcutter attachment PPB4000C 952711828 Attachments Type Part no. Edger attachment PPB1000E 952711825 Cultivator attachment PPB2000T 952711826 Pruner attachment PPB...

Page 5 - ADDITIONAL SAFETY RULES; FOR OPTIONAL ATTACHMENTS

5 S Use only for jobs explained in this manual (or manuals for optional attachments). UNIT / MAINTENANCE SAFETY S Disconnect the spark plug before perform- ing maintenance except carburetor adjust- ments. S Look for and replace damaged or loose parts before each use. Look for and repair fuel leaks b...

Page 8 - SNOW THROWER SAFETY

8 WARNING: Falling objects can cause severe head injury. Wear head protec- tion when operating this unit with a pole prun- er attachment. WARNING: To prevent serious inju- ry, do not use more than one boom extension with a pole pruner attachment. WARNING: Keep the pruner away from power lines or ele...

Page 9 - ASSEMBLY; INSTALLING TRIMMER ATTACH-

9 ASSEMBLY WARNING: If received assembled, repeat all steps to ensure your unit is properly assembled and all fasteners are secure. Examine parts for damage. Do not use dam- aged parts. NOTE: If you need assistance or find parts missing or damaged, call 1-800-554-6723. It is normal for the fuel filt...

Page 10 - OPERATION; HELPFUL TIP

10 OPERATION KNOW YOUR TRIMMER READ THIS INSTRUCTION MANUAL AND SAFETY RULES BEFORE OPERATING YOUR UNIT. Compare the illustrations with your unit to familiarize yourself with the location of the various controls and adjustments. Save this manual for future reference. Line limiter blade Assist handle...

Page 12 - OPERATING INSTRUCTIONS; OPERATING POSITION

12 2. Press and hold the locking/release button. Locking/Release Button Coupler Upper Shaft Attachment 3. While securely holding the engine and upper shaft, pull the attachment straight out of the coupler. INSTALLING OPTIONAL ATTACH- MENTS 1. Remove the shaft cap from the attach- ment (if present). ...

Page 13 - MAINTENANCE; CHECK FOR LOOSE

13 which can damage the trimmer head, become entangled in the line, or be thrown causing a serious hazard. S The tip of the line does the cutting. You will achieve the best performance and minimum line wear by not crowding the line into the cutting area. The right and wrong ways are shown below. Tip...

Page 14 - SERVICE AND ADJUSTMENTS

14 INSPECT AND CLEAN UNIT AND LABELS S After each use, inspect complete unit for loose or damaged parts. Clean the unit and labels using a damp cloth with a mild deter- gent. S Wipe off unit with a clean dry cloth. CLEAN AIR FILTER A dirty air filter decreases engine perform- ance and increases fuel...

Page 16 - STORAGE

16 REPLACING THE TRIMMER HEAD 1. Hold the dust cup with a wrench to keep the shaft from turning while removing and installing trimmer head. Dust Cup 2. Remove trimmer head by turning coun- terclockwise (looking from bottom of unit). 3. Thread replacement trimmer head onto the shaft by turning clockw...