POSIFLEX TP-6000 SERIES - Manuals

TP6000 USER’S MANUAL 1 - 1 BRIEF INTRODUCTION THE USER’S MANUAL The purpose of this manual is to guide the user in the initial installation and general use of the Posiflex fully integrated compact touch terminal system with touch panel input. TP6000 series is a product group of fully integrated PC b...

TP6000 USER’S MANUAL 1 - 2 STANDARD FEATURES a) CPU: Celeron 366MHz up to 500 MHz HDD: 6.4 GB or above b) Support MS DOS, WIN98, WIN NT, WIN 2000 environment (WIN 2000 support starting June 2000) c) Power saving support: doze or suspension mode d) High quality 12.1” / 15.1” TFT active matrix LCD pan...

TP6000 USER’S MANUAL 1 - 3 o) Built-in UPS function to support the system from intermittent power failure (battery itself is an option) p) Accidental power off protection – The power switch is safely located at one side, and this power switch can be defined as a “ON” switch only through software com...

TP6000 USER’S MANUAL 2 - 1 SYSTEM BOX CONTENTS MAIN UNIT & PADDLE ASSEMBLY Open the carton and take all the contents out together with the packaging materials. Take out the accessories/options from the partitions in the packaging materials and unfold the packaging materials carefully to unload t...

TP6000 USER’S MANUAL 2 - 2 The COM1 terminator will be already mounted on the system unit when being shipped. The latch key for cable cover lock will be in a bag. OPTIONAL DEVICES There are several options that will be mounted on/in the main system unit either by the manufacturer if ordered. These o...

TP6000 USER’S MANUAL 3 - 1 PARTS IDENTIFICATION FRONT VIEW The MSR unit is option to both 12” and 15” models. The LED in the logo area serves for multiple purposes through giving different indication of steady/flashing green/orange light. Please refer to the paragraph discussing the LED indication i...

TP6000 USER’S MANUAL 3 - 2 SIDE VIEWS Right Side View Left Side View Lock/Release Lever Push In This Direction To AdjustThe Tilt Angle OfThe Display Panel Slide Switch For Power On/Off Control Push Down To SwitchThe Power ON/OFF Latch Hole For Cable Cover Latch Hole ForCable Cover

TP6000 USER’S MANUAL 4 - 1 INSTALLATION GUIDES CAUTION: Before any installation or cable connection to the set, please always make certain that the system is turned off and the external power source to the set is removed to prevent electric hazard! Never touch any metal pin in the connectors or circ...

TP6000 USER’S MANUAL 4 - 2 Cable PassageCover Cable Passage Four Screws HoldingBattery Cover Battery Cover PREPARING PADDLE ASSEMBLY Take the adjustable paddle assembly and turn it up side down to show the bottom of the base. Now, unscrew the 2 screws on the cable passage cover and take the cable pa...

TP6000 USER’S MANUAL 4 - 4 PREPARING THE MAIN UNIT On the back of the main unit, there are 4 matching pegs and a service window. Push open the service window in the direction as indicated in the picture, one can find a button cell battery socket, a 1 x 3 header (JP10) with 1 jumper and a 2 x 3 heade...

TP6000 USER’S MANUAL 4 - 5 the hole and make sure that all pegs are inside the holes. Then slide the main unit down to move the pegs into the lower slot part of the holes till it clicks. Note that all the cables come out of the paddle from the lower edge and won’t get trapped by this mounting operat...

TP6000 USER’S MANUAL 4 - 6 CONNECTING CABLES Connect the cables required to the appropriate connectors. Please make sure that each connector has to be connected to the right port in the right orientation. Some connectors have to be inserted till a click is heard such as the LAN connector, the extern...

TP6000 USER’S MANUAL 4 - 7 the shorter one for the original cash drawer “CR1” and use the longer one for the extended cash drawer “CR2” that will be distinguished by the software command. In this way, the TP6000 is capable of controlling two cash drawers independently through software command. WALL ...

TP6000 USER’S MANUAL 5 - 1 USING THE TOUCH POS APPLICATION ENVIRONMENT It is very important that you check the following operational guidelines: Ventilation This terminal must NOT be operated in an environment with restricted ventilation. The installation should be such that there is at least 25mm a...

TP6000 USER’S MANUAL 5 - 3 POWER ON/OFF LED Indicator There is an LED in the logo area that serves for multiple purposes. When the TP6000 is standing by for powering up in the presence of external power supply, the LED is orange. When the TP6000 is powered up and working normally with the external p...

TP6000 USER’S MANUAL 5 - 4 Hardware Switch The power switch located at left side of the main unit is a slide type switch. This switch controls the power on/off of the system. This switch turns the system on when slid downward at original power connection status or power off status. The switch will a...

TP6000 USER’S MANUAL 5 - 5 program shall prepare the terminal to standby for LAN Wake Up during power off so that when the predefined condition is met (LAN status change or receiving certain packet) the TP6000 will be powered on. When the TP6000 system is turned off after a successful boot up, the d...

TP6000 USER’S MANUAL 5 - 6 DISPLAY RESOLUTION For best viewing result please set your display resolution of TP6012 at 800 x 600 with true color in the operation system. For TP6015, please set the display resolution at 1024 x 768 with high color. TOUCH PANEL The touch panel in TP6000 series, either P...

TP6000 USER’S MANUAL 5 - 7 also be obtained through downloading from our web site. Application of this program provides control over the MSR, the touch panel and the power control of the Posiflex Touch Terminal. For an RS232 interfaced touch panel, the touch panel part of the following description s...