Page 2 - • SAVE THESE INSTRUCTIONS •; SAFETY GUIDELINES - DEFINITIONS
indicates an imminently hazardous situation which, if not avoided, will result in death or serious injury. indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury. indicates a potentially haz ard ous situation which, if not avoided,may result in min...
Page 3 - SPECIFICATIONS; GENERAL INFORMATION
3 - ENG D25800 SPECIFICATIONS Prolonged exposure to air spray can result in per-ma nent damage to hear ing. Always wear hear ing protection when operating spray equip ment. Spray guns op er ate at pres sures and velocities high enough to pen e trate human and an i mal flesh, which could result in am...
Page 4 - DO NOT exceed 100 psi.; cause only air to be re leased.; Horizontal position; OPERATION
4- ENG D25800 Prior to shipment, this gun was treated with an anticorrosive agent. Before using this gun make sure that it is carefully flushed with thinner. 1. The po si tion of the air cap (H) horns will de ter mine the spray pattern. Loosen (G) air cap and rotate horns to achieve desired pattern....
Page 5 - Prop er ly dispose of used cleaning ma te ri als.; Cleaning; of fluid nee dle tip when unscrewing nozzle.; Lubrication; with straight mineral oil.; Change or Replace noz zle set; MAINTENANCE; Nozzle Sets; Part Number; high solids, multipurpose
5 - ENG D25800 Always ex ercise ex treme care when us ing any sol vent or thin ner. Nev er clean gun near fire, flame, or any source of heat or sparks. Prop er ly dispose of used cleaning ma te ri als. DO NOT soak en tire spray gun in sol vent or thin ner for a long period of time as this will de st...
Page 6 - TROUBLESHOOTING
6- ENG D25800 Dried ma te ri al is clog-ging side-port “A” and causing side-port “B” to blow spray towards the clogged side A. Soak side-ports in thinner to clean clog. DO NOT poke any opening with hard objects. B. Dried material at fluid nozzle “C” restricts air flow Loose air nozzleAir pressure se...
Page 7 - PARTS LIST
7 - ENG D25800 PARTS LIST REF NO DESCRIPTION PART NO 1 Air Nozzle with Cap D25242 2 Fluid Nozzle D25243 3 Packing Screw for Paint Needle D25156 4 Teflon Seal D25157 5 Washer D25160 6 Spring D25161 7 Brass Ring D25162 8 Gasket D25163 9 Connector for 0.6 Liter cup D25164 10 Hanger D25166 11 Air Valve ...
Page 8 - LIMITED WARRANTY
8- ENG D25800 LIMITED WARRANTY PORTER-CABLE CORPORATION warrants to the original purchaser that all products covered under this warranty are free from defects in material and workmanship. Products covered under this warranty include air compressors, air tools, service parts, pressure washers, and ge...