Porter-Cable 7812 - Manuals

Page 2 - This vacuum is intended for commercial use.; SAFETY INSTRUCTIONS; GROUNDING INSTRUCTIONS; WARNING; This appliance is for use on a nominal; Note: In Canada, the use of a temporary adapter is not permitted

2 This vacuum is intended for commercial use. SAFETY INSTRUCTIONS GROUNDING INSTRUCTIONS This Appliance must be grounded. If it should malfunction or breakdown,grounding provides a path of least resistance for electric current to reducethe risk of electric shock. This appliance is equipped with a co...

Page 3 - BEFORE USING THIS APPLIANCE,

3 IMPORTANT SAFETY INSTRUCTIONS SAVE THESE INSTRUCTIONS WARNING: When using electric appliances, always follow basic safety precautions to reduce the risk of fire, electric shock and personalinjury, including the following: BEFORE USING THIS APPLIANCE, READ AND FOLLOW ALL INSTRUCTIONS. These applian...

Page 4 - REPLACEMENT PARTS; When servicing use only identical replacement parts.; MOTOR; Do not operate your appliance on a current on which the; EXTENSION CORD SELECTION; UNPACKING

4 15. Do not pick up anything that is burning or smoking (cigarettes, matches,or hot ashes). 16. Do not use this appliance without a dust bag and/or filters in place. REPLACEMENT PARTS When servicing use only identical replacement parts. MOTOR Many Porter-Cable products will operate on either D.C. o...

Page 5 - ASSEMBLY

WARNING: Do not connect the appliance to the power source until you have read and understood this entire instruction manual. Release the two container locks (A), Fig. 1, (one on each side of VacuumCleaner), by pulling outward on the bottom of each lock.Lift the Motor Unit from the container and care...

Page 6 - Attach the vacuum hose to the; The hose that; bayonet connector slightly.

8. Attach the vacuum hose to the machine (Fig. 3). The Hose isequipped with a bayonet styleconnector. Align the projection on theside of the Hose connector with theslot in the Container intake port.Slide connector into intake port androtate one-quarter turn clockwise tolock. NOTE: Models 7812 and 78...

Page 7 - OPERATING INSTRUCTIONS; POWER SWITCH

7 D. Slide the collar (B) off the standard hose and position it onto the Static Dissipating hose. E. Thread the mounting hub (C) onto the Static Dissipating hose (by turning it counterclockwise). F. Place the bayonet connector onto the mounting hub and position the collar (B), so that its locking ta...

Page 8 - Turn the Vacuum Cleaner switch to the “OFF” position. Grasp handle (C); CAUTION: DISCONNECT APPLIANCE FROM POWER CIRCUIT.; not adequately clean the filter, replace it.

PARKING BRAKE Both models are equipped with a Parking Brake. The parking brake will lockone wheel to prevent the vacuum from rolling. To engage parking brake, use your toe to depress the brake button. The brakewill snap into the locked position. To disengage parking brake, use your toe to pull up on...

Page 10 - MAINTENANCE; KEEP TOOL CLEAN; Wear safety glasses while using compressed air.; FAILURE TO START

MAINTENANCE KEEP TOOL CLEAN Periodically blow out all air passages with dry compressed air. All plastic partsshould be cleaned with a soft damp cloth. NEVER use solvents to cleanplastic parts. They could possibly dissolve or otherwise damage the material. CAUTION: Wear safety glasses while using com...

Page 11 - ACCESSORIES; Delta; Since accessories other than those offered by

11 ACCESSORIES A complete line of accessories is available from your Porter-Cable • Delta Supplier, Porter-Cable • Delta Factory Service Centers, and Porter-Cable Authorized Service Stations. Please visit our Web Site www.porter- cable.com for a catalog or for the name of your nearest supplier. WARN...

Page 12 - ONE YEAR WARRANTY

12 PORTER-CABLE LIMITED ONE YEAR WARRANTY Porter-Cable warrants its Professional Power Tools for a period of one year from the date of originalpurchase. We will repair or replace, at our option, any part or parts of the product and accessoriescovered under this warranty which, after examination, pro...

Page 13 - PORTER-CABLE SERVICE CENTERS; DELTA SERVICE CENTERS

The following are trademarks of PORTER-CABLE Corporation (Las siguientes son marcas registradas de PORTER-CABLE S.A.) (Les marquessuivantes sont des marques de fabriquant de la PORTER-CABLE Corporation): BAMMER ® , LASERLOC ® , OMNIJIG ® , POCKET CUTTER ® , PORTA-BAND ® , PORTA-PLANE ® , PORTER-CABL...