Porter-Cable 6615 - Manuals

Page 2 - GRINDING, DRILLING, AND OTHER CONSTRUCTION ACTIVITIES; IMPORTANT SAFETY INSTRUCTIONS; KEEP WORK AREA CLEAN.

2 WARNING: SOME DUST CREATED BY POWER SANDING, SAWING, GRINDING, DRILLING, AND OTHER CONSTRUCTION ACTIVITIES contains chemicals known to cause cancer, birth defects or otherreproductive harm. Some examples of these chemicals are:· lead from lead-based paints,· crystalline silica from bricks and ceme...

Page 3 - WEAR EAR PROTECTION; ADDITIONAL SAFETY RULES FOR PORTABLE DRILLS; ALWAYS

3 9. USE SAFETY GLASSES. Wear safety glasses or goggles while operating power tools. Also face or dust mask if operation creates dust. All persons inthe area where power tools are being operated should also wear safetyglasses and face or dust mask. 10. DON’T ABUSE CORD. Never carry tool by cord or y...

Page 5 - FUNCTIONAL DESCRIPTION; FOREWORD; Type of Bit

FUNCTIONAL DESCRIPTION FOREWORD Porter-Cable drills are designed to drill holes of various sizes in wood andmetal as indicated in the following chart: INSTALLING AND REMOVING DRILL BIT (Except Keyless Models 2621, 6615) 1. CAUTION: DISCONNECT TOOL FROM POWER SOURCE. 2. The three-jaw chuck is designe...

Page 7 - HOW TO HOLD THE DRILL; The front end of drill may be made live if the tool drills into

7 4. REVERSING SWITCH – The reversing switch is located as indicated in Fig. 3. These models will operate in either the forward direction (clockwiserotation) for drilling holes, or the reverse direction (counterclockwise rotation)for releasing jammed drill bits. For counterclockwise rotation, stop t...

Page 8 - HOW TO USE THE DRILL; GENERAL DRILLING

8 HOW TO USE THE DRILL GENERAL DRILLING 1. Be sure drill bit is securely gripped in chuck. (See INSTALLING AND REMOVING DRILL BIT). 2. Set REVERSING SWITCH for clockwise rotation. 3. Make sure work is held securely in vise or clamped in place prior to starting drilling operation. CAUTION: Loose work...

Page 9 - DRILLING METAL; MAINTENANCE; KEEP TOOL CLEAN

9 DRILLING METAL In addition to the instructions listed under GENERAL DRILLING, the followingalso apply: CAUTION: When drilling metal, jamming of bit is more likely than when drilling other materials. 1. Use only good quality sharp high speed steel twist bits when drilling metal. 2. Start drilling w...

Page 10 - BRUSH INSPECTION AND LUBRICATION

10 6. Remove allen wrench from chuck. 7. INSTALL CHUCK RETAINING SCREW: Turn screw counterclockwise with a “flat” screwdriver. Tighten securely. BRUSH INSPECTION AND LUBRICATION For your continued safety and electrical protection, brush inspection andreplacement on this tool should ONLY be performed...

Page 11 - ACCESSORIES; Delta Factory Service Centers, and; Since accessories other than those offered by; Delta have not been tested with this product, use of such; Cable; Delta recommended accessories should be used with this

11 ACCESSORIES A complete line of accessories is available from your Porter-Cable • Delta Supplier, Porter-Cable • Delta Factory Service Centers, and Porter-Cable Authorized Service Stations. Please visit our Web Site www.porter-cable.com for a catalog or for the name of your nearest supplier. WARNI...

Page 12 - ONE YEAR WARRANTY

12 PORTER-CABLE LIMITED ONE YEAR WARRANTY Porter-Cable warrants its Professional Power Tools for a period of one year from the date of originalpurchase. We will repair or replace at our option, any part or parts of the product and accessoriescovered under this warranty which, after examination, prov...