Planet GSD-1020 - Manuals - manualsarea.com

Page 2 - Trademarks; Copyright; Disclaimer

Trademarks Copyright  PLANET Technology Corp. 2002. Contents subject to revision without prior notice. PLANET is a registered trademark of PLANET Technology Corp. All other trademarks belong to their respective owners. Disclaimer PLANET Technology does not warrant that the hardware will work proper...

Page 3 - TABLE OF CONTENTS

TABLE OF CONTENTS 1. INTRODUCTION ...........................................................................................................................1 1.1 C HECKLIST .................................................................................................................................

Page 4 - Check the contents of your package for following parts:; Power cord; About the Switch; standard; Support total 1Mbit packet buffers with dynamic allocation; bandwidth; Support to handle up to 1522 bytes packe

- 1 - 1. INTRODUCTION 1.1 Checklist Check the contents of your package for following parts: GSD-1020 User's manual Power cord If any of these pieces are missing or damaged, please contact your dealer immediately, if possible, retain the carton including the original packing material, and use them ag...

Page 5 - HARDWARE DESCRIPTION; System; Blink: indicate that the connection is experiencing collisions

- 2 - 2. HARDWARE DESCRIPTION This section describes the hardware features of the Giga Switch. For easier management and control of the switch, familiarize yourself with its display indicators, and ports. Front panel illustrations in this chapter display the unit LED indicators. Before connecting an...

Page 7 - provided screws in a standard 10”/19” rack.

- 4 - 3. INSTALLATION 3.1 Before start up Before your installation, please refer to the followings for your cabling: 100Base-TX All 100Base-TX ports come with auto-negotiation capability. They automatically support 100Base-TX and10Base-T networks. Users only need to plug a working network device int...

Page 8 - Figure 3. End node, Hub or Switch connection; Cable distance for Switch; Connecting to Network Backbone or Server; Figure 4: Network Backbone or Server connection

- 5 - Figure 3. End node, Hub or Switch connection Notice: Cable distance for Switch The cable distance between Ethernet Switch and hub/PC should not exceed 100 meter for UTP/STP cable. Make sure the wiring is correct It can be used Category 3/4/5 cable in 10 Mbps operation. To reliably operate your...

Page 11 - APPENDIX A NETWORKING CONNECTION; Contact

- 8 - APPENDIX A NETWORKING CONNECTION A.1 Switch‘s RJ-45 Pin Assignments 1000Mbps / 1000BaseT Contact MDI MDI-X 1 BI_DA+ BI_DB+ 2 BI_DA- BI_DB- 3 BI_DB+ BI_DA+ 4 BI_DC+ BI_DD+ 5 BI_DC- BI_DD- 6 BI_DB- BI_DA- 7 BI_DD+ BI_DC+ 8 BI_DD- BI_DC- Implicit implementation of the crossover function within a ...

Page 12 - APPENDIX B TECHNICAL SPECIFICATIONS; Hardware Specification

- 9 - APPENDIX B TECHNICAL SPECIFICATIONS GSD-1020 10/100/1000Mbps Gigabit Fast Ethernet Switch Hardware Specification Ports Eight 10/ 100Base-TX , two 1000Base-T RJ-45 Auto-MDI/MDI-X ports Switch Fabric 5.6Gbps Switch Processing Scheme Store-and-forward Throughput (packet per second) 4.16Mpps Addre...