Phoenix Gold pm1400 - Manuals

Page 2 - CAUTION; Operating Tips; Table Of Contents; Important Paperwork

CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK) NO USER-SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL The lightning flash with arrowheadsymbol within an equilateral triangleis intended to alert the user ...

Page 6 - Controls And Functions

6. BRIDGED OPERATIONThe STEREO/MONO switch is located just behind the input panel. This switch is used to select betweenNORMAL STEREO operation, DUAL MONO operation, or BRIDGED MONO operation. For NORMALSTEREO operation, use CH 1 and CH 2 inputs. For DUAL MONO or BRIDGED MONO operation, use CH2 inpu...

Page 8 - Input Wiring; for rated output. The input sensitivity can; for more information.; Figure 4A; Installation; Mechanical Considerations

AC Power ConsiderationsEnsure that the pm1400 is plugged into an outlet capable of supplying the correct voltage specified for yourmodel and enough current to allow full-power operation of all the amplifiers plugged into it. The currentdemand of a power amplifier varies depending on several factors,...

Page 10 - Output Wiring; connected to the CH2 input.

9 70V Distribution SystemsThe pm1400 has sufficient output voltage capability in stereo mode to drive 70-volt distributionsystems without using a step-up transformer at the amplifier. In this configuration, the pm1400delivers up to 475 watts per channel to the 70-volt system, depending on the impeda...

Page 12 - some tips to help you get the most from it.; Accessory Options; with a series of DIP switches on the module. (Order model AT2)

Operating Tips Using the pm1400 Once the amplifier has been installed and wired into the system, you are ready to use it. Here are some tips to help you get the most from it. • Verify that the switches (Stereo / Mono, Clipping Eliminator and Level Defeat) have been set to the mode that you want. • W...

Page 14 - Figure 9; Input Polarity; In Case of Difficulty; Servicing Instructions; To remove the input panel and input board:; Figure 8

13 Figure 9 Input Polarity The XLR input connectors on the pm1400 are shipped from the factory with pin 2 hot (+), as indicated on the rear panel. Thepolarity of the balanced inputs can be reversed by changing four jumpers located on the Input Board. Cross-wire JP3 and JP4 tochange the input polarit...

Page 16 - Warranty Information; Professional Power Amplifiers: 5 years; Care and Service; Carver Professional

Warranty Information Professional Power Amplifiers: 5 years NOTE: The following warranty is exclusive to the United States and its possessions and territories. Please see yourCarver Professional dealer or distributor for the correct warranty information in your area or locale. WHAT IS COVERED: THIS ...

Page 18 - DECLARATION OF CONFORMITY; Year; DAY; Performance; Professional Stereo Power Amplifier

DECLARATION OF CONFORMITY We CARVER PROFESSIONAL INTERNATIONAL (supplier’s name) 9300 N. DECATUR, PORTLAND, OR 97203 USA (address) declare under our sole responsibility that the product pm1400 (name, type or model, lot, batch or serial number, possibly sources and numbers of items) to which this dec...