Philips pixel plus - Manuals

5 To use the menus & Press the MENU key on the remote control to summon the main menu. At any moment you can exit the menu bypressing the MENU key again. Note: If you have connected equipment with Cinema Link, moremenu items are present. é Use the cursor in the up/down direction to select the TV...

6 & Select Automatic install in the Install menu. Note: All channels must be unlocked in order toautoprogram. If requested, enter your code to unlockall channels. (See TV, Features menu, Childlock,p. 11.) é Press the cursor down. The autoprogrammingoption label Start appears. “ Press the cursor ...

7 Reshuffle the programme list You can change the order of the stored TVchannels. & Select Reshuffle in the Installation menu. é Follow the instructions on screen. Select Favourite TV channels & Select Favourite programmes in the Installmenu. é Select your programme number with thecursor up/...

Source This menu allows you to indicate the peripheralyou connected to one of the external inputs. & Press the cursor right to enter the list of typesof peripherals attached to the selected input. é Select the peripheral device with the cursorup/down. Once you have selected the source type, e.g....

9 & Press the cursor right to select Picture . é Select the menu items in the Picture menu withthe cursor up/down. “ Adjust the settings with the cursor left/right orenter the list of submenu items with the cursorright. Select a submenu item with the cursorup/down. Note: To remove the menu backg...

10 & Press the cursor right to select Sound . é Select the menu items in the Sound menu with the cursorup/down and adjust the settings with the cursor left/right.Remember, control settings are at normal mid-range levels whenthe bar scale is centred. Smart sound Select Smart sound to display a li...

11 Programme list Press the OK key to switch over to the selected TV channel or external. Select subtitles The subtitle page must be stored for each TVchannel:Switch on teletext and select the propersubtitle page from the index. Switch off teletext. Subtitle On will automatically display them on the...

12 Teletext guide & Press the æ key. é Select a TV channel with the cursor up/down and press OK . “ Move the cursor up to the top of the channel list where the name of the selected TV channelreappears. ‘ Press the cursor right to move the puck over the selection ball. ( In the teletext index pag...

13 Switch Teletext on and off Press b to switch the teletext on. Select a Teletext page - Enter the desired page number with the digit keys, the cursor keys up/down or with the -P+key. - Select the options at the bottom of the screen with the colour keys. Previously selected teletext page (Only poss...

14 Teletext menu (only available in full screen teletext mode) & Press the MENU key to activate the menu. é Press the cursor up/down to select the menuitems. “ Press the cursor right to activate. Reveal Reveals/conceals hidden information on a page,such as solutions to riddles and puzzles.Press ...

15 There is a wide range of audio and video equipment that can be connected to your TV.The following connection diagrams show you how to connect them. Note: EXT. 1 can handle CVBS and RGB, EXT. 2 CVBS and Y/C , EXT. 3 CVBS and RGB. It is preferred to connect peripherals with RGB output to EXT. 1 or ...

16 Press the v key on the remote control repeatedly to select EXT1 , EXT2, EXT3 or SIDE according to where you connected your equipment at the back or the right side of your TV. Remark : Most equipment (decoder, recorder) carries out the switching itself, when it is switched on. To select connected ...

17 Audio- and video equipment keys B b ¬ + - V + - P v b i 0 h q Select VCR DVD SAT AMP CD MENU OK 1 2 3 4 5 6 7 8 9 0 Ò ® ‡ π † Active Control S ® ® ® ® æ B to switch to standby S for pause ( VCR , DVD , CD ) ® for record, Ò for rewind ( VCR , CD ); search down ( DVD , AMP ) ‡ for stop π for play †...

18 Tips Care of the screen Do not touch, push or rub or strike the screen with anything hard as this mayscratch, mar or damage the screen permanently. And please do not rub with dustclothes with chemical treatment. Do not touch the surface with bare hands orgreasy cloth (some cosmetics are detriment...

The connection diagram in the inside cover shows you how to connect the Cinema Link peripheralswith each other. Notes: - Besides the TV at least one peripheral should be provided with the Cinema Link functionality to benefit from this feature. - To take advantage of the highest quality of multi chan...

2 Receiver menu Note: When Cinema Link is enabled, certain items of the Sound menu (see TV menu) are steered by theaudio receiver instead of by the TV. & Press the MENU key on the remote control. é Press the cursor down to select Receiver . “ Press the cursor right to enter the Receiver menu ite...

3 Surround menu Dependent on the audio receiver speakers configuration, you may not be able to select certain menuitems. Adjustment of the volume level of the loudspeakers Note: the test tone function is automatically cancelled by the audioreceiver when leaving the Surround menu. & Select Test T...

4 In the Automatic installation menu select Start to activate the automatic searching of all radio stations which can bereceived.The programme list is automatically filled with all thenumbers and names of the radio stations transmitted. Automatic installation Automatic install Install Start Receiver...