Philips HTL1190B/12 - Manuals

Page 3 - Contents

1 EN Contents 1 Important 2 Help and suppor t 2 Safety 2 Care for your product 3 Care of the environment 3 Compliance 4 2 Your SoundBar 4 Main unit 4 Remote control 5 Connectors 6 3 Connect 6 Placement 6 Connect audio from TV and other devices 7 4 Use your SoundBar 8 Adjust the volume 8 Choose your ...

Page 4 - Important; Help and support; Safety

2 EN 1 Important Read and understand all instructions before you use your product. If damage is caused by failure to follow instructions, the warranty does not apply. Help and support For extensive online suppor t, visit www.philips.com/suppor t to: • download the user manual and the quick star t gu...

Page 5 - Care for your product; Care of the environment

3 EN Risk of overheating! • Never install this product in a confined space. Always leave a space of at least four inches around the product for ventilation. Ensure cur tains or other objects never cover the ventilation slots on the product. Risk of contamination! • Do not mix batteries (old and new ...

Page 6 - Compliance; Your SoundBar; Main unit

4 EN Compliance This product complies with the radio interference requirements of the European Community. Hereby, Gibson Innovations declares that this product is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU. You can find the Declaration of Conf...

Page 7 - Remote control

5 EN • AUDIO IN : Lights up when you switch to audio input source (3.5mm jack). • USB : Lights up you switch to USB source. • Lights up when you switch to Bluetooth mode and Bluetooth devices are paired. Blinks when you switch to Bluetooth mode and Bluetooth devices are not paired. Remote control Th...

Page 8 - Connectors; Connect; Placement

6 EN Connectors This section includes an over view of the connectors available on your SoundBar. a DIGITAL IN-OPTICAL Connect to an optical audio output on the TV or a digital device. b AUX Connect to an analog audio output on the TV or an analog device. c COAXIAL Connect to a coaxial audio output o...

Page 10 - Choose your sound; Surround sound mode

8 EN 4 Use your SoundBar This section helps you use the SoundBar to play audio from connected devices. Before you start • Make the necessar y connections described in the Quick Star t Guide or download the User Manual from www.philips.com/suppor t. • Switch the SoundBar to the correct source for oth...

Page 11 - Night mode; MP3 player; USB storage devices

9 EN Note • This feature is only applicable to COAXIAL ( COAX ) and OPTICAL ( OPT ) sources. Night mode For quiet listening, night mode decreases the volume of loud sounds when audio is played. Night mode is only available for Dolby Digital soundtracks. 1 Press NIGHT to turn night mode on or off. Ni...

Page 12 - Play audio through Bluetooth; Auto standby; Update software

10 EN Play audio through Bluetooth Through Bluetooth, connect the SoundBar with your Bluetooth device (such as an iPad, iPhone, iPod touch, Android phone, or laptop), and then you can listen to the audio files stored on the device through your SoundBar speakers. What you need • A Bluetooth device wh...

Page 13 - Wall mount; Product; Amplifier; Bluetooth

11 EN 5 Wall mount Note • Improper wall mounting may result in accident, injur y or damage. If you have any quer y, contact Consumer Care in your countr y. • Before wall mounting, make sure the wall can suppor t the weight of your SoundBar. Screw length/diameter Depending on the type of wall mountin...

Page 14 - Troubleshooting

12 EN • Frequency band/Output power : 2400 - 2483.5 MHz / ≤ 20 dBm Main unit • Power supply: 100-240 V~, 50/60 Hz • Power consumption: 25 W • Standby power consumption: ≤ 0.5 W • Dimensions (W x H x D): 865 x 67.8 x 85.5 mm • Weight: 1.8 kg • Built-in speakers : 4 x full range (54.5 mm/2”, 6 ohm) Re...