Philips DVD170AT - Manuals

- Depending on your TV and other equipment, there are various ways in which the DVD-Video player can be connec-ted. These are shown below. - Please refer to your TV, VCR, Stereo System and any other User Manual(s) as necessary to determine the optimum con-figuration. Connection to a TV with an A/V E...

Connection to a TV with a video (CVBS) jack. 1 Connect the Video jack on the rear of the player to the cor-responding jack on the TV using the cable supplied. 2 Connect the audio Left and Right channel jacks on the rearof the player to the corresponding jacks on the TV using thecable supplied. Alter...

Use the NTSC/PAL switch on the rear of the player to set theplayer menu according to the standard used by your TV set. To activate the new setting, the player needs to be switchedoff and on again. NOTE - The video output standard for video CD and DVD-Video discs must correspond to the disc being pla...

NOTE - Unless indicated otherwise, all operations can be performed using the remote control. Always point the remote controldirectly at the player, making sure there are no objectsobstructing the path of the infrared beam. - When there are corresponding keys on the front panel, these can also be use...

You will recognize DVD-Video discs by the logo. Depending on the material on the disc(a movie, video clips, a drama series, etc.) itmay have one or more Titles, and each Titlemay have one or more Chapters. Play stops at the end of eachTitle. For easy and convenient access, you can move betweenTitles...

• As each chapter is played, its number disappears from the track calendar. • To return to normal play, press SHUFFLE briefly again. REPEAT CHAPTER/TITLE/DISC • To repeat the chapter that is currently playing, press REPEAT for about 1 second: ➜ REPEAT CHAPTER appears on the player display. • To repe...

➜ If the disc has a title menu, this will now appear on the OSD. • To remove the title menu, press T-C again. You will recognize Video CDs by their logo. Depending on the material recordedon the disc (a movie, video clips, a dramaseries, etc.) it may have one or moretracks, and tracks may have one o...

NOTE - If the number has more than one digit, press the keys in rapid succession. PLAYBACK CONTROL (PBC) • Insert a Video CD with PBC and press 2 . ➜ The PBC menu appears on the TV screen. • Move through the menu using the keys indicated on the TV screen until the desired passage starts to play. If ...

• To exit from the Repeat mode, press REPEAT a third time for about 1 second. A-B REPEAT To repeat or loop a sequence: • Press A-B REPEAT briefly at the desired starting point; ➜ A appears on the player display. • Press A-B REPEAT briefly again at the desired end point; ➜ A - B appears on the displa...

• If the TV is on, the search speed and direction are indicated on the screen each time K or J is pressed. • To end the search, press 2 , ; , or 9 as desired. MOVING TO ANOTHER TRACK • Press K briefly during play to move forward to the next track. • Press J briefly during play to move back to the be...

To select Tracks:1 Insert a disc and go to Stop mode. 2 Press r . 3 Use l or r to move to the first track number you want to select. 4 Press b . 5 Repeat steps 3 and 4 to select other track numbers in thesame way. If you change your mind, you can de-select tracknumbers in reverse order by pressing o...

ACTIVATING PARENTAL CONTROL This can only be done in Stop mode 1 Press SETUP to view the Settings menu. 2 Move to Parental Control using o or b . 3 Press l or r to change Parental Control to Active. 4 You will be asked to enter a 4-digit PIN code of your ownchoice, and then to confirm your choice. 5...

If the DVD-Video player appears to malfunction, first consultthis checklist. Something simple may have been overlooked.Do not attempt to repair the system yourself under any cir-cumstances; this will invalidate the warranty. Look for the specific symptom(s). Then perform only the meas-ures indicated...

If the malfunction persists, you can run the player’s DiagnosticProgram. INSTRUCTIONS: 1 Switch the player off. 2 Press down and hold both OPEN/CLOSE and ; and turn the player on. ➜ ‘ BUSY ’ will appear on the display together with a coun- ter. The counter indicates that the test has been comple-ted...