Philips CE132 - Manuals

7 EN 3 Install the car audio system Caution • Use the controls only as stated in this user manual. Always follow the instructions in this chapter in sequence. These instructions are for a typical installation. However, if your car has different requirements, make the adjustment accordingly. If you h...

8 EN ISO male connectors Connect to i Yellow strip To the +12V car batter y which is energized at all times 2 Connect the antenna and amplifier as illustrated, if applicable. Sockets on rear panel External sockets or connectors 1 For ISO male connectors As indicated above 2 REAR L Rear left speaker ...

9 EN 3 Install the sleeve into the dashboard and bend the tabs outward to fix the sleeve. 4 Slide the unit into the dashboard until you hear a "click". 183 mm 53.5 mm 5 Attach the trim plate. 6 Reconnect the negative terminal of the car batter y. Attach the front panel 1 Inser t the notch on...

10 EN Detach the front panel Note • Before you inser t an SD/SDHC card or reset the system, detach the front panel. • Before you detach the front panel, make sure that the system is turned off. 1 Press to release the front panel. 2 Pull the front panel outwards to remove it.

11 EN 4 Get started For the first time use 1 Press to turn on the system. » [PHILIPS] is displayed and then [SELECT OPERATING REGION] (select a radio region) scrolls. 2 When one of the following options is displayed, rotate to select a radio region that matches your location. • [AREA EUROPE] (Wester...

12 EN Mute the button beep The beep sound of buttons is enabled by default. 1 Press and hold to access the system menu. 2 Press / repeatedly until [BEEP ON] or [BEEP OFF] is displayed. • [BEEP ON] : Enable the beep sound of buttons. • [BEEP OFF] : Mute the beep sound of buttons. 3 Rotate to change t...

13 EN 5 Listen to radio Select a tuner region You can select a radio region that matches your location. 1 In radio mode, press and hold to access the system menu. 2 Press / repeatedly until one of the following options is displayed. • [AREA EUROPE] (Western Europe) • [AREA ASIA] (Asia Pacific) • [AR...

14 EN Store radio stations manually 1 Press BAND , , or repeatedly to select a tuner band. 2 Tune to the radio station that you want to store. 3 Press and hold , , , , , or to store the radio station at the selected channel. • To select a stored radio station, press , , , , , or . Play with RDS The ...

15 EN Item Program type Description 30 TEST Alarm Test 31 ALARM Alarm Use alternate frequencies If the signal of an RDS station is poor, enable the AF (Alternate Frequency) function to search for another station that broadcasts the same program. 1 Press and hold to access the system menu. 2 Press / ...

16 EN 6 Play from a storage device 1 Connect a compatible USB storage device or SD/SDHC card. • For an SD/SDHC card, detach the front panel first, inser t the card into the card slot, and then attach the front panel. 2 Switch the source to [USB] or [SD/SDHC] . • When a USB storage device is connecte...

17 EN Switch tracks During play, you can switch tracks or folders quickly. Switch tracks directly 1 Press to access the track list. » The file name of current track scrolls. 2 Rotate to toggle through tracks. 3 Press to play the selected track. Switch folders for a track 1 Press to access the folder...

19 EN 8 Adjust sound The following operations are applicable to all suppor ted media. Button Function Rotate to increase or decrease the volume level.Press to mute the speakers or release them from mute status.Press to enable or disable the maximum volume.Press and hold to enable or disable the Dyna...

20 EN 9 Additional information Reset the system If the system works abnormally, reset the system to factor y default settings. 1 Detach the front panel. 2 Press the RESET button with the tip of a ball-point pen or toothpick. » All settings are reset to factor y default. Replace the fuse If there is ...

21 EN 10 Product Information Note • Specifications are subject to change without prior notice. General Power supply 12 V DC (11 V - 16 V), negative ground Fuse 15 A Suitable speaker impedance 4 - 8 Maximum power output 50 W x 4 channels Continuous power output 22 W x 4 RMS (4 10% T.H.D.) Pre-Amp out...

22 EN 11 Troubleshooting Warning • Never remove the casing of this product. To keep the warranty valid, never tr y to repair the product yourself. If you encounter problems when using this product, check the following points before requesting ser vice. If the problem remains unsolved, go to the Phil...

23 EN 12 Notice Any changes or modifications made to this device that are not expressly approved by Philips Consumer Lifestyle may void the user’s authority to operate the equipment. Care of the environment Your product is designed and manufactured with high quality materials and components, which c...