Philips 55PFL5703/F7 - Manuals

1 Notice Trademarks are the property of Koninklijke Philips N.V. or their respective owners.Funai Corporation reserves the right to change products at any time without being obliged to adjust earlier supplies accordingly. The material in this Owner's manual is believed adequate for the intended use ...

Copyright All other registered and unregistered trademarks are the property of their respective owners. The terms HDMI and HDMI High- Definition Multimedia Interface, and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing Administrator, Inc. in the United States and other countr...

2 Getting started Features Ɣ DTV / Analog TV / CATV You can use your remote control to select channels which are broadcast indigital format and conventional analog format. Also, cable and satellitesubscribers can access their TV channels. Ɣ Information display You can display on the TV screen the ti...

Unpacking It is recommended that two or more people remove the TV set fromthe box. Be careful not to injure your fingers and keep children awayduring assembly. (65PFL5703, 65PFL5603) 1 Open the top flaps of the box. 2 Remove all accessories. Caution(s) Ɣ DO NOT take the TV set out of the box yet. 3 ...

(55PFL5703, 55PFL5603, 50PFL5703) 1 Open the top flaps of the box. 2 Remove all accessories. 3 Prepare a table and cover the top of it with a table cloth, blanketor such to avoid damage to the TV set. Support both sides of theTV set and, move it onto the table. 4 Carefully lay the TV set, with the s...

(43PFL5703, 43PFL5603) 1 2 ×4 Note(s) Ɣ A wide open space is recommended for assembly. Ɣ A Phillips-head screwdriver is required to fasten the stands to the TV set. Ɣ When attaching the stand, ensure that all screws are tightly fastened. If thestand is not properly attached, it could cause the unit ...

Remote control q r u ts p o b a c d g e h l m n j k f i (POWER) Turns the TV on from standby or off to standby. VUDU Access directly to VUDU. EasyLink buttons / : Searches backward or forward through the disc. 1 : Starts, pauses or resumes playback. . : Stops the disc playback. Note(s) Ɣ Pause may n...

Control panel f c d e a b Remote control sensor Receives IR signal from remote control. CH + / – Selects a channel. In the menu screen, moves the cursorup (+) / down (–). (POWER) Turns the TV on or switches the TV into standby mode. MENU Opens the main on-screen menu. SOURCE Selects connected device...

Connecting antenna or cable / satellite /IPTV set-top box Be sure your antenna or another device is connected properly beforeplugging in the AC power cord. If connecting to an antenna through an RF cable Any DTV programs that are broadcast in your area can be received forfree through an antenna conn...

No included cables are used with these connections: Ɣ Please purchase the necessary cables at your local store. Before you connect the AC power cord: Be sure other devices are connected properly before plugging in theAC power cord. Selecting your connection quality HDMI - Highest quality Supports hi...

Connecting the TV to the internet using a wireless LAN Internet LAN WLAN Ethernetcable Network provisioning equipment Broadband router Note(s) Ɣ After you make the wireless connection, set up the necessary networksettings. Connect to network p. 41 Ɣ Use a wireless LAN Access Point (AP) (e.g. broadba...

USB memory stick This unit offers easy playback of picture, music and video files. Insert the USB memory stick into the USB terminal shown below.For a complete list of file formats and specifications supported, referto USB Section p. 27 Note(s) Ɣ The unit recognizes only a USB memory stick. Ɣ Do not...

These operations are accessible by remote control. Some may also be accessible by the main unit's control panel. Initial setup This section will guide you through the unit’s Initial setting whichincludes selecting a language for your on-screen menu, country,location and Autoprogram, which automatica...

3 Use your TV Switching on your TV and putting it instandby mode TV Remote control To turn the TV on from standby or off to standby Ɣ Press on the TV or the remote control. Note(s) Ɣ Energy consumption contributes to air and water pollution. When the ACpower cord is plugged in, your TV consumes ener...

Watching channels from an externaldevice Switching each input mode can easily switch with the remote controlbetween TV and external devices when they are connected to theunit. 1 Turn on the set-top box or the connected device. 䐟 Press SOURCE and use to select the set-top box or the connected device ...

Create a list of favorite channels You can create lists of your preferred TV channels so that you can findthose channels easily. 1 Press OK while viewing a TV program. 2 Use to select the desired channel, then press yellow button. 3 Use to select the desired favorite list ( Favorites 1 - Favorites 4...

For 4:3 video signal Wide screen Movie expand 16:9 Movie expand 14:9 4:3 Super zoom Automatic Manual Zoom Automatic Other than DTV and HDMI connected devices,enlarges the picture to best fit the screen.DTV and HDMI connected devices display thepicture at its original size. The subtitles may remainvi...

Using options menu You can access to some TV settings directly by using OPTIONS . 1 Press OPTIONS to display options menu, then press OK . 2 Use to select a desired setting, then press OK . a b c d Options Options Following settings can be configured. Voice guide toggle To set Voice guide on or off....

USB Your TV is fitted with a USB connection that enables you to viewphotos, listen to music or watch video files stored on a USB memorystick. 1 Press SOURCE and use to select USB , then press OK . 2 Use to select the desired file, then press OK . USB DISK 2016_12_24 folder_A folder_B folder_C Photo ...

Playing movies 1 Use to select Movie , then press OK . 2 Use to select the desired item, then press OK . 3 Press OK or 1 to play the selected files. Ɣ Press OK or 1 to pause, then press OK or 1 again to resume. Ɣ Press to fast-forward search. Ɣ Press to fast-backward search. Ɣ Press . to stop playba...

Picture and sound setup Before you begin: You must set Home in Location . p. 35 Otherwise, personalized picture and sound settings will not bememorized after the unit goes into standby mode. 1 Press and use to select Setup then press OK . 2 Use to select Picture and sound setup , then press OK . 3 F...

Sound Before you begin: You must set Home in Location . p. 35 Otherwise, personalized picture and sound settings will not bememorized after the unit goes into standby mode. 1 Press and use to select Setup then press OK . 2 Use to select TV settings , then press OK . 3 Use to select Sound , then pres...

Features 1 Press and use to select Setup then press OK . 2 Use to select TV settings , then press OK . 3 Use to select Features , then press OK . Sleeptimer Installation Features Sound Picture Accessibility 4 Adjust the following items. Sleeptimer Sleep timer can set the unit to go into standby mode...

Preferences You can set the unit to reduce the power consumption or adjust thebacklight brightness in Location setting. EasyLink allows you to operate your connected EasyLink device. Setting your location to home Choosing Home gives you full flexibility to change predefined settings for picture and ...

EasyLink (HDMI CEC) This function allows you to operate the linked functions between ourbrand devices with a EasyLink feature and this unit connectingthrough an HDMI cable. You must connect this unit to our brandEasyLink devices and be sure its EasyLink (HDMI CEC) setting is alsoset to on. 1 Use to ...

Caption settings Closed captions displays the audio portion of the program assuperimposed text over the video. 1 Use to select Caption settings , then press OK . CC w/ mute On Off Digital caption options Digital caption service Caption service Closed captions Digital audio preferences Caption settin...

Digital audio preferences You can set the interpretive broadcasting by an audio explanation. 1 Use to select Digital audio preferences , then press OK . Primary audio selection criteria Audio language Audio accessibility Digital audio preferences Caption settings Voice guide Audio accessibility To p...

Child lock You can prevent your children from watching certain programs orcertain channels by locking the TV controls and by using ratings. 1 Use to select Child lock , then press OK . Mono/Stereo Digital audio language Change PIN Child lock Channel installation Region ratings lock Canadian French r...

US TV ratings Sub rating TV-Y7 Fantasy Violence TV-PG ViolenceSexLanguageDialog TV-14 TV-MA ViolenceSexLanguage Note(s) Ɣ Blocked sub rating's will appear beside the main rating category in TV ratings lock menu. Ɣ You cannot block a sub rating if the main rating is set to . Ɣ Changing the category t...

Connect to network Setup network connection settings in order to use Net TV or networkupgrade functions. Ɣ The meanings of abbreviations are defined as below. AP : Wireless LAN access point SSID : Wireless network name Ɣ The key entry screen will appear when you select SSID, WEP /others or proxy add...

Network settings 1 Press and use to select Setup then press OK . 2 Use to select Network settings , then press OK . 3 Adjust the following items. Manual network settings1 Use to select Manual network settings , then press OK . Proxy configuration IP configuration Wireless network setting Network sel...

Manually enter your SSID Set up the connection to the AP (e.g. wireless router) manually byentering the SSID. 3 Use to select Manually enter your SSID , then press OK . Ɣ AP (e.g. wireless router) SSID entry screen will appear. Enter the SSID using , then press OK . 4 Use to select the authenticatio...

Proxy configuration 2 Use to select Proxy configuration , then press OK . 3 Use to select a setting, then press OK . Do not use Proxy setting Proxy configuration IP configuration Wireless network setting Network selection Use Proxy port Proxy address Ɣ Do not use is selected for default settings. Ɣ ...

Home network You can turn your TV into a Digital Media Renderer (DMR), which canplay video, music and photo files stored on certified home mediaservers connected to your home network. 1 Use to select Home network , then press OK . 2 Use to select the item you want to adjust, then press OK . Renderer...

Update software Philips continuously tries to improve its products and we stronglyrecommend that you upgrade the TV software when upgrades areavailable. New software can be downloaded from our website at www.philips.com/support using the model number of your TV to find information. You can update th...

Network updates You can update the software by connecting the unit to the internet. 1 Press and use to select Setup then press OK . 2 Use to select Update software , then press OK . 3 Use to select Network , then press OK . 4 Use to select Yes , then press OK . Ɣ This unit will then start checking f...

Wireless screencasting You can wirelessly cast or mirror the screen of your Smartphone, Tablet or PC to the TV directly using wireless screencasting. Using wireless screencasting 1 Press Z and use J K to select Wireless Screencasting , then press OK . ● Wireless screencasting mode screen appears. PH...

Before using home network Follow the procedure below before using home network. 1 Connect this unit to the internet. Connecting the TV to the internet using an Ethernet cable p. 17 or Connecting the TV to the internet using a wireless LAN p. 18 Ɣ Broadband internet connection of 8Mbps or faster is r...

Net TV Net TV offers internet services for your TV. Use the TV remote controlto browse the Net TV pages. You can play movies, listen to music andmuch more, all from your TV screen. – Because Net TV is an online system, it can be modified over timeto better serve its purpose. – Some Net TV services c...

Pandora operations With this unit, you can instantly listen to personalized radio stationsstreamed over the internet from Pandora. To learn more about Pandora, please visit www.pandora.com Activating Pandora In order to listen to internet radio streamed from Pandora via theinternet, you must create ...

5 Useful tips FAQ Question Answer My remote control does not work.What should I do? Ɣ Check the antenna or cable connection to the main unit. Ɣ Check the batteries on the remote control. Ɣ Check if there is an obstacle between the infrared sensor window and the remote control. Ɣ Test the IR signal o...

Troubleshooting tips If the unit does not perform properly when operated as instructed in this manual, Please check the following Troubleshooting tips and all connections once before calling for service. Power No power Ɣ Make sure the AC power cord is plugged in. Ɣ Make sure that the AC outlet suppl...

6 Information Glossary Analog TV (NTSC) Acronym that stands for National Television Systems Committee and thename of analog broadcasting standards.Off the air analog TV signals are no longer being sent by majorbroadcasting stations in the USA. ARC (Audio Return Channel) (HDMI 2 only) HDMI-ARC allows...

7 Specifications Model # 65PFL5703/ 65PFL5603 55PFL5703/ 55PFL5603 50PFL5703/ 50PFL5603 43PFL5703/ 43PFL5603 Picture Type UHD (Ultra HD) (3840 x 2160 pixels 60Hz) Diagonal screen size / Aspect ratio 64.5”/ 16:9 54.6”/ 16:9 49.5”/ 16:9 43”/ 16:9 Viewing angles 178° (V) by 178° (H) Built-in digital / ...

8 Warranty This warranty gives you specific legal rights. You may have other rights which vary from state/province to state/province. Funai Service Corporation, 2425 Spiegel Drive, Groveport, OH 43125, USA Limited warranty one (1) year Warranty coverage : This warranty obligation is limited to the t...

License Funai Corporation, Inc. hereby offers to deliver, upon request, a copyof the complete corresponding source code for the copyrighted opensource code packages, on an “AS IS” basis, used in this product forwhich such offer is requested by the respective licenses. This offer isvalid up to three ...