Philips 49PUT4900/12 - Manuals

2.6 Satellite dish - For PUK models Attach the satellite F-type connector to the satelliteconnection SAT at the back of the TV. 5

3 Connect devices 3.1 About connections Connectivity guide Always connect a device to the TV with the highestquality connection available. Also, use good qualitycables to ensure agood transfer of picture and sound. If you need help to connect several devices to the TV,you can visit the Philips TV co...

Y Pb Pr - Audio L R Y Pb Pr - Component Video is a high qualityconnection. The YPbPr connection can be used for High Definition(HD) TV signals. Next to the Y, Pb and Pr signals addthe Audio Left and Right signals for sound. Match the YPbPr (green, blue, red) connector colourswith the cable plugs whe...

3.3 Set-top box - STB Use 2 antenna cables to connect the antenna to theSet-top box (a digital receiver) and the TV. Next to the antenna connections, add an HDMI cableto connect the Set-top box to the TV. Auto switch off Switch off this automatic timer, if you only use theremote control of the Set-t...

No sound If you cannot hear the sound from the TV on yourHome Theatre System, check the following . . . - Check if you connected the HDMI cable to a HDMI 1 connection on the Home Theatre System. - Check if the HDMI ARC setting on the TV is switched On . Go to  > Setup > TV settings > Sound...

3.9 USB Hard Drive What you need If you connect a USB Hard Drive, you can pause orrecord a TV broadcast. The TV broadcast must be adigital broadcast (DVB broadcast or similar). To pause To pause a broadcast, you need a USB 2.0compatible Hard Drive with a minimum of 32GB discspace. To record To pause...

3.11 Camcorder HDMI For best quality, use an HDMI cable to connect thecamcorder to the TV. CVBS - Audio L R Use a Video Audio L/R cable to connect thecamcorder to the TV. 3.12 Computer Connect You can connect your computer to the TV and usethe TV as a PC monitor. With HDMI Use an HDMI cable to conne...

4 Switch on 4.1 On, Standby or Off Before you switch on the TV, make sure you pluggedin the mains power in the POWER connector on the back of the TV. To put the TV in Standby when the indicator light isoff, press the small joystick key on the back of the TV.The indicator will light up. With the TV i...

5 Remote control 5.1 Key overview Top 1.  Standby / On To switch the TV on or back to Standby. 2. Playback keys - Play  , to playback - Pause  , to pause playback - Stop  , to stop playback - Rewind  , to rewind - Fast forward  , to go fast forward - Record  , to record now 3.  TV GUIDE To o...

6 TV channels 6.1 Channel Lists About channel lists After a channel installation, all channels appear onthe channel list. Channels are shown with their nameand logo if this information is available. There is a channel list with all installed channels. Youcan only filter this list to show TV or only ...

Select a subtitle language If none of the preferred subtitle languages areavailable, you can select another subtitle language ifavailable. If no subtitle languages are available, youcannot select this option. To select a subtitle language when none of yourpreferred languages are available… 1. Press ...

- Language To switch the group of characters that Text uses todisplay correctly. - Text 2.5 To activate the Text 2.5 for more colours and bettergraphics. Text setup Text language Some digital TV broadcasters have several Textlanguages available.To set your primary and secondary Text language . . . 1...

7 Channel installation- Antenna, Cable 7.1 Update channels Automatic update If you receive digital channels, you can set the TV toautomatically update the list with new channels.Alternatively, you can start a channel update yourself. Automatic channel update Once a day, at 6 AM, the TV updates the c...

Symbol rate mode If your cable provider did not give you a specific symbol rate value to install the TV channels, leave the Symbol rate mode setting on Automatic . If you received a specific symbol rate value, select Manual . However, the value you received could be in the predefined list of symbol ...

8 Channel installation- Satellite (For PxKmodels) 8.1 Watching satellite channels To watch satellite channels . . . Press  and select Satellite and press OK . The TV tunes to the satellite channel you last watched. Change channel To change channels, press  + or   . The TV will tune to the next c...

immediately. Press OK . To avoid a lot of reordering later, select the channels in the order you want themin the list.4. To add a channel to the Favourites list, select thechannel and press OK . You can then select another channel to add as a favourite.5. To finish, press  . Add or remove favourite...

8.5 Satellite installation About installing satellites This TV has a built-in satellite DVB-S/DVB-S2receiver. Connect the cable from your satellite dishdirectly to the TV. Use a coaxial cable fit forconnecting a satellite antenna dish. Make sure yoursatellite dish is perfectly aligned before you sta...

To set Speakers / Headphones . . .1. Press  and select Setup and press OK . 2. Select Satellite settings > Languages > Audio description > Speakers / Headphones and press OK . 3. Select Speakers , Headphones or Speakers + headphones and press OK . 4. Press  , repeatedly if necessary, to c...

9 TV guide 9.1 What you need With the TV guide you can view a list of the currentand scheduled TV programmes of your channels.Depending on where the TV guide information (data)is coming from, analogue and digital channels or onlydigital channels are shown. Not all channels offer TVguide information....

3. At the top of the screen, select  Scheduled and press OK . 4. In the list of scheduled recordings and reminders,select the tab Reminders and press OK to view the reminders only.5. Press the colour key  Remove to remove the selected reminder. Press the colourkey  Record to record the selected p...

10 Recording andpause TV 10.1 Recording What you need You can record a digital TV broadcast and watch itlater. To record a TV programme you need… - a connected USB Hard Drive formatted on this TV- digital TV channels installed on this TV- to receive channel information for the on screen TVGuide- a r...

key  Adjust Time . 6. Select the start or end time and change the timewith the  (up) or  (down) keys. Select Apply and press OK . Manual Recording You can schedule a recording that is not linked to aTV programme. You set the tuner type, channel andthe start and end time yourself. To schedule a re...

11 Sources 11.1 Switch to a device In the list of connections - the Source menu - you canfind the devices connected to the TV. From thisSource menu, you can switch to a device. Sources menu To open the Sources menu, press  SOURCES . To switch to a connected device, select the devicewith the arrows ...

12 Timers and clock 12.1 Sleep timer With the sleep timer, you can set the TV to switch tostandby automatically after a preset time. To set the sleep timer . . . 1. Press  and select Setup and press OK . 2. Select TV settings > General settings > Sleep timer . With the slider bar you can set ...

13 Videos, Photos andMusic 13.1 From a USB connection You can view your photos or play your music andvideos from a connected USB flash drive or USB HardDrive. With the TV switched on, plug in a USB flash drive or aUSB Hard Drive to one of the USB connections. TheTV detects the device and will list y...

Info To view info on a photo (size, creation date, file path,etc.), select a photo and press  INFO . Press again to hide the info. Slideshow with music You can watch a slideshow of your photos and listento your music at the same time. You must start theusic before you start the photo slideshow. To ...

14 Settings 14.1 Picture Picture style Select a style For easy picture adjustment, you can select a presetPicture Style. 1. Press  and select Setup and press OK . 2. Select TV settings > Picture > Picture style , and select one of the styles in the list.3. Select a style and press OK . The av...

2. Select a format from the list and press OK . Screen edges With Screen edges , you can slightly enlarge the picture to hide distorted edges. To adjust the edges ... 1. Press  and select Setup and press OK . 2. Select TV settings > Picture > Format and edges > Screen edges . 3. Adjust the...

the volume difference is small, select Less . 5. Press  , repeatedly if necessary, to close the menu. Audio out delay With a Home Theatre System (HTS) connected to theTV, the picture on TV and the sound from the HTSshould be synchronised. Automatic audio to video sync With recent Philips Home Theat...

15 Specifications 15.1 Environmental Saving energy The Eco settings bundle the settings that help the environment.While you are watching TV channels, press  to open Eco settings . Press  again to close Eco settings . Energy saving This Picture style sets the picture, in the most idealenergy consci...

When this crossed-out wheeled bin symbol isattached to a product it means that the product iscovered by the European Directive 2002/96/EC. Please inform yourself about the local separatecollection system for electrical and electronicproducts. Please act according to your local rules and do notdispos...

• 800 x 600p - 60 Hz• 1024 x 768p - 60 Hz• 1280 x 768p - 60 Hz• 1360 x 765p - 60 Hz• 1360 x 768p - 60 Hz• 1280 x 1024p - 60 Hz• 1920 x 1080p - 60 Hz• 3840 x 2160p - 24 Hz, 25 Hz, 30 Hz (YCbCr 4:4:4,YCbCr 4:2:2, YCbCr 4:2:0)• 3840 x 2160p - 50 Hz, 60 Hz (YCbCr 4:2:0) 15.5 Power Product specifications...

15.9 Multimedia Note: Multimedia file names must not exceed 128characters. Supported multimedia connections - USB (FAT / FAT 32 / NTFS): only connect USBdevices that consume 500 mA of power or less. Supported image files - JPEG: *.jpg, *.jpeg- PNG: *.png.jpg Supported audio files - MPEG1: *.mp3 Supp...

16 Software 16.1 Software update It might be necessary to update the TV software. Youneed a computer and a USB memory device toupload the software on the TV. Use a USB memorydevice with 256MB free space. Make sure that writeprotection is switched off. 1. Start the update on TV To start the software ...

17 Troubleshootingand support 17.1 Troubleshooting Channels No digital channels found during the installation See the technical specifications to make sure thatyour TV supports DVB-T or DVB-C in your country.Make sure that all cables are properly connected andthat the correct network is selected. Pr...

Make sure that Location is set to Home . Picture does not fit the screen Change to a different picture format. Press  . Picture format keeps changing with different channels Select a non 'Auto' picture format. Picture position is incorrect Picture signals from some devices may not fit thescreen cor...

17.4 Online help To solve any Philips TV related problem, you canconsult our online support. You can select yourlanguage and enter your product model number. Go to www.philips.com/support . On the support site you can find your country'stelephone number to contact us as well as answers tofrequently ...

18 Safety and care 18.1 Safety Important Read and understand all safety instructions beforeyou use the TV. If damage is caused by failure tofollow instructions, the warranty does not apply. Secure the TV from falling over Always use the supplied wall bracket to secure the TVfrom falling over. Mount ...

Lightning storms Disconnect the TV from the power outlet and antennabefore lightning storms.During lightning storms, never touch any part of theTV, power cord or antenna cable. Risk of hearing damage Avoid using earphones or headphones at highvolumes or for prolonged periods of time. Low temperature...

Dolby Dolby® Manufactured under license from Dolby Laboratories.Dolby and the double-D symbol are trademarks ofDolby Laboratories. MHEG software The copyright in MHEG software (the Software)comprised in this television (this product) andincluded to enable you to use interactive televisionfeatures is...