Page 3 - Table of Contents; How to navigate, open menu’s and make selections
- 2 - Table of Contents Version history: ................................................................................................................................... - 1 - 1. General information .....................................................................................................
Page 9 - General information; Notice; Leaflets and product documentation
- 8 - 1. General information In this document, you can find information on how to install the Philips Professional TV’s from the xxHFL5x14 and xxHFL6x14U range. This document is intended for the System Integrator or the responsible technician of the location this device will be placed. You will find...
Page 10 - Definitions, Acronyms and Abbreviations; WIXP
- 9 - 1.3 Definitions, Acronyms and Abbreviations [ ] : The values between brackets are referring to a TV menu item or a button on screen “ “ : The values between quotation marks are referring to a remote button CDB: CustomDashBoard DVB-T : Digital Video Broadcasting - Terrestrial DVB-C : Digital Vi...
Page 11 - Requirements before starting the installation of a TV; Remote control; Master remote control; It’s best to use the green RC as it h
- 10 - 2. Requirements before starting the installation of a TV Before starting the installation, make sure that you have everything you need at hand. You need a USB device and a remote control. 2.1 Remote control 2.1.1 Master remote control It’s best to use the green RC as it h as specific function...
Page 12 - Guest remote control
- 11 - 2.1.2 Guest remote control 22AV1905A (xxHFL5014 - xxBFL2214) 22AV1905B (xxHFL5x14x) 22AV2226A (xxHFL6214U) 22AV2005B (xxHFL5214U) Note: The 22AV1905B remote control can be ordered as an accessory if you would already have a 22AV1905A (2019) and would like to replace it with the same remote co...
Page 13 - Accessory remote controls; previous RC’s with digits will; Setup of the remote controls; press and hold the “; Mute
- 12 - 2.1.3 Accessory remote controls 22AV1604B Healthcare RC 22AV1601B Easy RC 22AV2005B Digit RC 22AV2025B Voice RC 22AV2204A Hygienic RC 22AV2226A Hygienic RC Note: previous RC’s with digits will NOT work with the 5014/6014 TV series as the code sent by the RC for some keys is different. If your...
Page 14 - Yellow”
- 13 - You will see the battery status of the RC, the setting programmed in the RC (default = blue) and the setting in TV. Below you can find a table how to match the TV settings and the settings as they can be used in the guest RC: Mode: Buttons combination: Blue (default) “ Home ” and “ Blue ” Yel...
Page 15 - Professional Settings menu; “RC 6 setup”
- 14 - • You can change the RC to RC5 mode by pressing 5 seconds “ Menu ” and “ Volume up ” at the same time. • You can change it back to RC6 mode by pressing 5 seconds “ Mute ” and ” Channel up ” at the same time. You can also use this RC for multi RC. More details can be found in the ‘Professional...
Page 16 - or; “mute left right up down ok”; will not show the [; Software upgrade; Insert the USB stick
- 15 - • Using the guest remote control, press the following keys sequentially: “3 1 9 7 5 3 mute” or “mute left right up down ok” Note: The sequence: “3 1 9 7 5 3 mute” will not show the [ Professional Settings ] if [ High Security ] option is enabled, it will only work using the ‘master RC’ 2.3 So...
Page 17 - Clone folder structure; Note: The folder names are case sensitive
- 16 - o After the update is done and the USB stick can be extracted • It’s required to first upgrade the TV and afterwards to perform the installation The latest software version and cloning data can be stored on the same USB drive for a 2 in 1 action: software upgrade and cloning du ring the insta...
Page 18 - Find out the state of the TV; Virgin mode; ]. You will need to do a virgin installation after you have
- 17 - 3. Find out the state of the TV It is important to know if a TV is in Virgin mode (out of the box) or installed before. When installing a newly bought TV, it will be in virgin mode. 3.1 Virgin mode If you can see b elow screen, you know that the TV is in ‘out of the box’ state and you can ins...
Page 20 - Reinstall the TV manually; Professional Settings; Press the “; OK; ” button on the; Reinstall TV
- 19 - 4. Reinstall TV 4.1 Reinstall the TV manually If you want to start an installation from scratch you can always reinstall the TV. All settings will be reset to the default values and channel list will be cleared. Note: Some settings like webservice url, roomID, manual date and time, profession...
Page 21 - ” button to reinstall the TV.; Reinstall via a script in the clone file; script ca; ReinstallTV
- 20 - Select [ Yes ] and press the “ OK ” button to reinstall the TV. You will see that the TV will apply a reset and restart into IIC mode. 4.2 Reinstall via a script in the clone file To automatically reinstall the TV, load a new clone file and load new SW you can use this script. In the ‘MasterC...
Page 22 - Virgin installation; ] at any time during the process to change the RoomID.; Create Master Clone; you need to press “; ” to activate the; Skip Searching; TV’s
- 21 - 5. Virgin installation – Instant Initial Cloning (IIC) Out of the box a new TV will be in virgin mode. This means that you will have to go through the Instant Initial Cloning wizard to apply the first settings of the TV. You might need to wake up the TV from standby. When starting up the TV i...
Page 23 - Software update and use an existing clone file; B device with both the new SW (See chapter “; Skip
- 22 - When you [ Confirm ] the Room ID you will go the last screen with information about the professional menu. If you [ Confirm ] again, you will exit IIC and go to the Professional Menu to make the configuration you require on the TV. If your configuration is done you can download the clone file...
Page 24 - Downloading and installing to TV will start
- 23 - o Downloading and installing to TV will start o Is you are installing software, you might see some reboot logos and waiting animation. The software update might take several minutes. All depends on the file size and download speed.
Page 25 - You can also still go to the [; ] by activating the button if you still; RoomID; You can change the RoomID in below screen; Confirm; ] you will exit the IIC mode and you will go to the professional
- 24 - o Once the procedure has finished, a countdown will start of 30 minutes, after this time the TV will automatically go to standby and is ready to be used. You can also still go to the [ Professional Settings ] by activating the button if you still need to change some settings. You can also sti...
Page 26 - as this session; Exit Professional menu after installing apps
- 25 - 6. Professional Settings 6.1 General information In this chapter, you can find information about all professional settings that can be changed. To start you have to open the [ Professional Settings ] menu. Using the guest remote control, press the following keys sequentially: “3 1 9 7 5 3 mut...
Page 27 - Overview; Open this menu item; back; ” will exit this screen again; Upgrade and Clone; menu
- 26 - 6.2 Overview o Navigate to the [ Overview ] menu o Open this menu item o You will get an overview screen with all the settings that are set in the TV, this overview can be used to see the settings without having to navigate to all menu’s separately o Using the “ arrow up/down ” buttons you ca...
Page 31 - Switch on settings; menu, you will see the screen on the left
- 30 - MHz. So, if you do a playout on another frequency as set in the TV, the TV will do a fallback scan in order to find it. Make sure the frequency is not used by any other tv-, radio- or data mux. o [ Scan Mode ]: Define when the TV shall scan the RF stream for updates ▪ When [ Legacy ] is selec...
Page 36 - Identification Settings
- 35 - 6.5 Identification Settings 6.5.1 RoomID o Navigate to the [ Identification Settings ] [ RoomID ] menu o This is a (maximum) 5 digits number that can be used to distinguish between different floors/rooms/setups when using CMND Intention is to fill in the room number in this field 6.5.2 Premis...
Page 37 - Guest Management
- 36 - 6.5.4 Device Name o Navigate to the [ Identification Settings ] [ Device Name ] menu o You will see below items: o [ Force Custom Name ]: When [ On ] the custom defined name will be used, when [ Off ] the RoomID will be used (RoomXXXXX) o [ Custom Name ]: Define the TV name to show on mobile ...
Page 39 - Dashboard; Note: How to do this is explained in the
- 38 - 6.7 Dashboard o Navigate to the [ Dashboard ] menu o You will see the screen on the left o Navigate to the [ Dashboard ] [ Select Dashboard ] menu o You will see below items: o [ Philips Home ]: You need to press “ OK ” to access and change the Philips Default Dashboard configuration Note: Ho...
Page 40 - Features; You will see the screen on the left
- 39 - when set to [ On ], when [ Off ] the Default Dashboard will be launched when no connection can be made o Navigate to the [ Dashboard ] [ Reload ] menu o When CDB is connected and connection drops, the SI is free to choose to either stay on CDB or switch to Local CDB. However, if connection re...
Page 41 - will see “Auto” as a value in case you are
- 40 - o Navigate to the [ SmartTV Server Settings ] menu o You can configure your apps using a wizard under [ Features ][ Apps ][ Manage ]. Once you have done this wizard you will be able to change your settings in this menu. o You will see below items: o [ SmartTV Mode ]: You can set the SmartTV M...
Page 42 - User
- 41 - Note: See chapter “Manage Apps” to see how you can use the website to configure your personal profile Note: Apps will only be synchronized to the server when you have exited the Professional Session. After exiting the Professional Session, you will see the app list appear in your personal pro...
Page 44 - Info”
- 43 - In the user menu under Apps this will split up the installed apps per category or show all apps o Navigate to the [ App Sync ] menu o You will see below items: o [ TV to SmartTV Server ]: You can select [ On ] to upload apps to the Philips servers so they can be synced ag ain to other TV’s or...
Page 51 - Channels
- 50 - Note: Using CMND you will be able to create and send banners to TV, using triggers in CMND you can automate this 6.8.12 TalkBack o Navigate to the [ Talkback ] menu o You will see below items: o [ Enable ]: You can enable to show the talkback option in the dashboard using [ Yes ] or disable u...
Page 55 - Sources; On; Off; ] is only accessible if
- 54 - 6.10 Sources o Navigate to the [ Sources ] menu o You will see the screen on the left o Navigate to the [ Enable Sources ] menu o You will see a list of externals (including USB media browser). You can enable or disable sources to be available in the menu Note: The list of sources is dependin...
Page 57 - Date and Time
- 56 - Note: [ Standard ] enables up to 2160p60 4:2:0, [ Optimal ] enables up to 2160p60 4:4:4 and [ Off ] enables up to 1080p60. The list of sources is depending on the hardware in relation to the screen size and can be different from the screenshot 6.11 Date and Time o Navigate to the [ Date and T...
Page 60 - Wireless and Networks; See chapter ‘Network installation wizard’
- 59 - o Navigate to the [ OnScreen Clock Display ] menu o You will see below items: o [ Digital Clock ]: You can set the clock to be shown as a digital clock o [ Analogue Clock ]: You can set the clock to be shown as an analogue clock o Navigate to the [ Date Format ] menu o You will see below item...
Page 62 - List of connected Wi-Fi networks
- 61 - o Navigate to the [ Wake on LAN (WoL) ] menu o You will see below items: o [ Off ]: Wake up via LAN is disabled o [ On ]: Wake up via LAN enables an external Server to wake up the TV from complete Standby (green) using the wired network connection. Once you wake up TV using WoL, the TV will g...
Page 65 - Input Control; ” button on the RC to different
- 64 - 6.13 Input Control o Navigate to the [ Input control ] [ Local Keyboard Control Lock ] menu o You will see below items: o [ Off ]: All local keyboard buttons are enabled o [ On ]: All local keyboard buttons are disabled except for the power button o [ All ]: All local keyboard buttons are dis...
Page 68 - ‘No updates’ message say; Advanced
- 67 - ‘Updated’. You can press [ Done ] to close the wizard ▪ When no updates are found you will see a ‘No updates’ message say ing that your RC is up to date, you can close the wizard by pressing [ Done ] 6.14 Advanced o Navigate to the [ Advanced ] menu o You will see the screen on the left o Nav...
Page 73 - TV Settings
- 72 - 6.15 TV Settings o Navigate to the [ TV Settings ] menu o You will see the screen on the left 6.15.1 Picture o Navigate to the [ Picture ] menu Note: These settings will be applied when using the [ Switch on Settings ][ Picture Settings ][ Picture Style ][ Personal ] o You will see below item...
Page 78 - Android Settings; Reset
- 77 - rendered along with main audio. This can also be turned [ Off ] ▪ [ Speech ]: Select [ Descriptive ] to hear the audio commentary or select [ Subtitles ] to read the spoken words Note: Above menus are only available if [ Accessibility ][ Audio Description ] menu is set to [ On ] 6.16 Android ...
Page 79 - When you press “; ” you will Reinstal
- 78 - o Navigate to the [ Reinstall TV ] menu o When you press “ OK ” you will Reinstal l the TV, your TV will reboot and start in IIC mode (like the TV comes out of the box). All the settings will be reset to the factory settings except for RoomID, professional mode, WebServices Server URL, Secure...
Page 80 - Professional setting wizards; Philips Home Dashboard configuration; and backgrounds to map the color scheme of your customer’s wishes,
- 79 - 7. Professional setting wizards 7.1 Philips Home Dashboard configuration The new UI also called `Philips home Dashboard` has received a major update in order to be more content-richer, easy to use, fast moving, smart, adaptive and is fully customizable. Default UI: Adapted UI: You are able to...
Page 84 - Manage Apps; Secon
- 83 - 7.2 Manage Apps 7.2.1 Manage Apps configuration wizard There are two ways to configure your apps in the TV. • First is to create your own Profile in order to manage the apps through the web portal (https://appcontrol.cmnd.pro/). The initial configuration is to be done through the TV in order ...
Page 85 - ] in the previous screen, you can choose to use an existing; Yes; ] if you want to configure the TV without an AppControl; create or use an ‘Auto generate AppProfile’. So you will not; Use Existing
- 84 - • If you choose [ Yes ] or [C ontinue ] in the previous screen, you can choose to use an existing AppControl account using [ Yes ] or [ No ] if you want to configure the TV without an AppControl account. • If you select [ No ], you will need to choose to [ Use Existing ] or create a [ New/Ret...
Page 87 - the ‘Apps’ chapter under ‘Professional Settings’.; Installing Apps using Google Play Store; ou see the “Professional Session Active”
- 86 - From here onwards, you can access the menu to control your apps and manage them as explained in the ‘Apps’ chapter under ‘Professional Settings’. 7.2.2 Installing Apps using Google Play Store After you have gone through the wizard, you can access the menu to manage all the apps. If you need t...
Page 89 - After signing in you will see Google Play
- 88 - After signing in you will see Google Play You can navigate and try to find apps or use the search function in the right upper corner to find apps you want to install. Once you have found the app you were looking for you can select and open the app in order to see more details or install the a...
Page 90 - You can choose to go the [; Google PlayStore; ] if you know everything is; Managing Apps through the AppControl Portal
- 89 - Once downloading and installation is ongoing, you will see the progress. Best is to wait until the installation is completed before installing a new app. You cannot see ongoing progress in the Google Play menu. The installation of the apps needs to be finished else they will not get uploaded ...
Page 91 - Account; : Here you can find and edit the details of your account. This; App Control; ’ and ‘; PIN Code; that you will need to configure a TV
- 90 - we have extended the already existing AppControl framework from previous generations to allow easy and remote management of the apps on the TV. Using the AppControl function, you can re-order and remove apps on the. Adding new apps from Google Play still requires you to do this locally on one...
Page 92 - Locations; : Here you can configure locat; Statistics
- 91 - • Locations : Here you can configure locat ions where TV’s are installed but this is not required, this location might be used later on for statistics information. When you add a location When adding a location, you will be requested to fill in a Geonames ID. You can find the ID on www.geonam...
Page 93 - If required you can change the ‘Profile name’ using the [; Change; ] in the upper right corner; + Import AutoProfiles; existing ‘Auto generate AppProfile’ into your account.
- 92 - Once created you will see the details of the profile, the default apps and the available Hotel TV Categories. If required you can change the ‘Profile name’ using the [ Change Name ] in the upper right corner o [ + Import AutoProfiles ]: As earlier explained you can generate an ‘Auto generate ...
Page 95 - Apply; ], you will see the Terms and Conditions that you have to sign.
- 94 - You can see than you have actions available next to the app you want to authorize for and also the current status. Note: Further details on how to enable ‘Netflix’ can be found in the chapter “ Install Netflix on TV ” After you [ Apply ], you will see the Terms and Conditions that you have to...
Page 96 - Manage Welcome Screen
- 95 - { "packageName":" com.android.myapp ", "packageURI":" ./myapp.apk ", "silentAction":"install", "packageType":"local", "packagePosition": 10 , "packageShowHide":"1", "packageCountry":[ "ALL"...
Page 97 - Never
- 96 - • Backdrop • Colours • PhilipsWelcomeScreen You can add your own screensaver application by loading it as a local apk in TV. With the correct settings, it will be detected as screensaver application. All details are explained in the JEDI documentation that can be obtained after signing an NDA...
Page 100 - Manage ThemeTV; er pressing “
- 99 - 7.4 Manage ThemeTV To manage ThemeTV you have to go to the [ Professional Settings ][ Features ][ ThemeTV ][ Manage ] menu. Using this feature, you will be able to add themes in the channel list selection. You can organize the channel list per theme or per language according to your preferenc...
Page 101 - and pressing the “; ” button you will get the actions list.
- 100 - • The possibility to add new themes (maximum 10). You can create a custom theme or add one from the predefined list. When adding a custom theme, this will not be translated when customers are using different languages. Note: The icons you see below are reflected in the channel list and the H...
Page 103 - Manage MyChoice; allows you to configure the feature. Turned on
- 102 - 7.5 Manage MyChoice To manage MyChoice you have to go to the [ Professional Settings ] [ Features ] [ MyChoice ] menu. When you open this menu, you will see the possibility to configure MyChoice. More information can be found on http://www.my-choice.tv/. [Enable] allows you to configure the ...
Page 104 - MyChoice Free; Platform specific
- 103 - You can navigate in this grid and by selecting an icon in Package 1 or Package 2 and by pressing “ OK ” you will see that the selection of your choice is highlighted. Doing so for all channels you can put channels in the package you want. Customers who have no PIN Customers who have PIN for ...
Page 105 - any TV’s MyChoice packages by flashing a new clone item.
- 104 - Compared to the previous platform the MyChoice packages are not mutually exclusive, meaning that it will be possible to activate both package 1 and package 2 at the same time. Please keep this in mind when creating the MyChoice packages as it requires a different mindset during the creation....
Page 107 - Manage Scheduler; ] menu, this function allows to set up
- 106 - 7.6 Manage Scheduler Navigate to the [ Professional Menu ] [ Features ] [ Scheduler ] menu, this function allows to set up different schedules on same or different sources when the feature is enabled. Navigate to the [ Professional Menu ] [ Features ] [ Scheduler ] [ Manage ] and open the me...
Page 109 - Yellow; ” and “; Blue; ” keys; Delete Schedule; To get out of the wizard, press the “; ” key on the RC
- 108 - o [ Priority/Order ]: shows the priority based on the list of defined schedules You can change the order using the “ Yellow ” and “ Blue ” keys to move the selected schedule up and down. The highest schedule has the highest priority. o [ Delete Schedule ]: allows you to delete the individual...
Page 110 - Manage Channels; Press ”
- 109 - 7.7 Manage Channels You can manage your channels, this means you can rename, reorder, hide/show, blank/non-blank the channels. This can also be done using CMND. To manage your channels, you have to go to the [ Professional Settings ] [ Channels ] [ Manage ] menu. When you open this menu, you...
Page 112 - Remove channels; You can; Options; confirmation screen where you can select [; ] and you will see below screens to re-number the
- 111 - 7.7.5 Remove channels You can select a channel you want to remove and press ” Options ”, select [ Remove ]. You will get a confirmation screen where you can select [ Yes ] to remove the channel from the list. 7.7.6 Re-number channels Even if you cannot see the channel number in your TV, you ...
Page 113 - Channel installation wizard; To install channels, you have to go to the [
- 112 - 7.8 Channel installation wizard 7.8.1 Install RF channels To install channels, you have to go to the [ Professional Settings ] [ Channels ] [ RF Channel Installation ] menu. In this menu you can go to [ Search for Channels ] or do a [ Digital: Manual Installation ] or do an [ Analogue: Manua...
Page 114 - Note: This list is country dependent
- 113 - o [ Quick reinstall ]: This is to install all channels with default settings o [ Advanced reinstall ]: This is to do a full re-installation which takes you through each step including changing the installed country Note: Both reinstall options will replace the current channel list o When sel...
Page 115 - Quick Scan
- 114 - o In the next screen you can [ Start ] or [ Configure ] some more settings, these settings are also available in the professional menu. If you have changed the setting you can return back using the color keys as indicated on the screen Note: By default [ Quick Scan ] is used, you need to cha...
Page 117 - Network installation wizard; When ‘; WPS with PIN code’
- 116 - 7.9 Network installation wizard To connect to a network, you have to go to the [ Professional Settings ] [ Wireless and Networks ] [ Connect to Network ] menu. Note: Some screens will be shown depending on your settings or selections made, some screens will not be shown o Wired, Wireless, WP...
Page 118 - Crestron Connected wizard; ” to start the configuration wizard.
- 117 - 7.10 Crestron Connected wizard In order to configure the Crestron application, you need to make sure you are connected to the internet. In the [ Professional Settings ][ Advanced ][ Select TV Control App ], you need to select [ Crestron Connected ] and press “ OK ” to start the configuration...
Page 120 - Network Information: ‘; ’ is not applicable
- 119 - 7.10.5 Room view settings This is a section that you can [enable] by an ON/OFF toggle. The default for this feature is OFF. This is a section to configure the Room View software. For configuring a connection with RoomView the following parameters are needed: [Room IpID] : The unique identifi...
Page 121 - Cloning; In this folder, you will find the ‘
- 120 - • Welcome Screen: When the TV has the Welcome screen APP on top, it cannot be controlled via an external controller, therefore you need to disable the Welcome Screen 7.10.10 Cloning In the clone file, you will find the details of this wizard in the professional apps folder after cloning to U...
Page 122 - Guest Menu; Recommended; Channel list (the selected one from the switch on settings); TV Channels
- 121 - 8. Guest Menu The guest menu is the menu the guest sees when his TV is on. Depending on the settings and installation, you will see the menu as explained in next chapters. 8.1 Recommended In the recommended page you will see (depending on the settings and installed content): • Information (d...
Page 123 - Cast; will be the SI’s responsibility
- 122 - 8.3 Cast In the Cast page you will have the possibility to cast from external devices to the TV. See below for more details. 8.3.1 What is Chromecast built-in? Chromecast built-in is a platform that lets you cast your favorite entertainment from your phone, tablet or laptop right to your TV....
Page 124 - Note: This compatibility mode can only be changed if [
- 123 - This setting only enables the feature but the feature cannot function without setting up the way to authenticate or to set up the P2P environment. Therefore, the second setting that is needed is to switch [ Secure Sharing ] to [ On ]. Once this is set the guest will already be able to connec...
Page 127 - ] it is possible that the connecti; Impact; Apps; All apps on one line
- 126 - When [ Internet Hotspot ] is turned [ Off ] it is possible that the connecti ng guest device doesn’t have any Internet connection. Not all devices support concurrent connections to an infrastructure network and a P2P network. 8.3.4 Impact The way casting works will have an impact on the prem...
Page 128 - Games
- 127 - 8.5 Games By default, no game apps are installed and hence you will not see the games page. If you have installed apps that are listed in the category “Games”, the games page will appear automatically and the games apps will be shown in this page.
Page 129 - More; The amount of menu items you will see will depend on your settings.; Settings
- 128 - 8.6 More The amount of menu items you will see will depend on your settings. 8.6.1 Settings The first shelf is settings. Here you can change picture settings, sound settings, picture format, the menu language and Parental Control. When opening one of the menu items, a detailed menu to change...
Page 130 - The second shelf is all about features.; Set alarm
- 129 - Note: Parental Control availability depends on the settings in the professional menu 8.6.2 Features The second shelf is all about features. Here you can set the alarm, a sleep timer, start the hotspot to make a connection, check the weather forecast, open the program guide or start talkback....
Page 132 - ” and disable by pressing again “
- 131 - 8.6.2.5 TV Guide You can access the TV guide via this menu. 8.6.2.6 Talkback Talkback is an accessibility service that helps vision-impaired users to interact with the TV. It uses spoken word and other audible feedback to let you know what's on your screen. You can enable talkback using “ OK...
Page 133 - Personal; Top icons; Google account; You can set the alarm using this button.
- 132 - Note: The account will be removed on checkout or in case when no PMS is used, when TV is put to STBY depending on the Clear User Data settings in the professional menu Depending on your settings (PMS enabled for example), you will see more options in [ Personal ]. 8.7 Top icons 8.7.1 Google ...
Page 134 - Weather; You can open the weather screen using this button.; Menu language; You can change the menu language using this button.
- 133 - You can set the alarm at the time and the channel you want, on one of the available sounds and on the volume you want. Once you have set a time you will also see the time in the top icons Note: The alarm can also be set through the [ More ][ Features ][ Set alarm ] menu or th rough the “ clo...
Page 136 - In case the Hotel’s PMS allows; Messaging; TV’s behavior
- 135 - 8.8.3 Greeting guest The first one might be small but it can address the guest entering the room personally. You can add the name of the person checking in to the Dashboard. Note: Showing the guest name can also be done inside the SmartInfo pages. 8.8.4 Bill In case the Hotel’s PMS allows it...
Page 137 - Additional options; Guest language change based on nationality
- 136 - When “Do Not Disturb” is turned Off, the TV will immediately interrupt any guest view when receiving a new message and it will show the message full screen for the guest to read. Of course, this in case t he TV is on at that moment, when it’s turned Off the message will be delivered upon sta...
Page 138 - SmartInfo; the hotels’ services and so on.
- 137 - 8.9 SmartInfo The SmartInfo feature can be used as a Browser or as an Application. SmartInfo can be set as Switch On Feature. This means that the TV will start up on the SmartInfo you have created and loaded in TV. SmartInfo can also be opened using the info button on the RC. 8.9.1 SmartInfo...
Page 140 - IP TV installation; Setup; It’s; Settings for installing IPTV; ‘Virgin installation wizard’.
- 139 - 9. IP TV installation 9.1 Setup It’s strongly advised to use fast mode in combination with IPTV because the boot time otherwise will be too slow. There are some limitations for the multicast stream that can be tuned: • TS stream needs to be compatible with DVB standard • Maximum bit rate 18M...
Page 141 - Installing IP Channels; brackets with the following format: (The; Note: This can also be done using CMND channel editor.; IP over RF cable using DOCSIS
- 140 - 9.3 Installing IP Channels Open the ChannelList.xml file as described in the chapter ‘ChannelList.xml in the clone file’. For each IP channel in your network, an xml element needs to be inserted within the <ChannelMap></ChannelMap> brackets with the following format: (The green e...
Page 142 - Make TV visible in CMND; Connect the TV via IP; the IP address of the CMND
- 141 - 10. Make TV visible in CMND This chapter describes the TV settings to connect to a CMND server over IP or RF. For the CMND settings please refer to the CMND manual on http://www.cmnd.io . You at least need CMND 7. 10.1 Connect the TV via IP 10.1.1 Change the TV settings The TV can connect to...
Page 143 - Server URL; Connect the TV via RF
- 142 - First 10 Last 10 http://192.168.103.1:8080/webservices.jsp http://192.168.103.245:8080/webservices.jsp http://192.168.103.2:8080/webservices.jsp http://192.168.103.246:8080/webservices.jsp http://192.168.103.3:8080/webservices.jsp http://192.168.103.247:8080/webservices.jsp http://192.168.10...
Page 144 - Custom Dashboard; Browser based custom dashboard
- 143 - 11. Custom Dashboard A custom dashboard or CDB is a method to replace the default UI of the TV with a custom UI. With a custom dashboard, it is possible to create a look and feel that matches the theme of the hotel/hospital/… or to add extra features like video on demand. The custom dashboar...
Page 145 - Examples; Custom channel logos; How to extract the channel logos
- 144 - 12. Examples 12.1 Custom channel logos 12.1.1 How to extract the channel logos You can extract the channel logos from the TV in following way: • Insert an empty USB stick into the TV and enter the Professional Settings • In the Professional Settings, navigate to [ Upgrade and Clone ][ Clone ...
Page 146 - Improper scaled channel logo in the Channels overview
- 145 - correct path is used. See below example, preset 1 contains a default channel logo and preset 2 contains a custom channel logo, notice the different paths Preset Channel name Logo path Logo 1 één HD logo=" file://default/3727.png ” 2 Philips logo=" file://custom/Philips.png ” Below sc...
Page 147 - ChannelList.xml in the clone file
- 146 - 12.2 ChannelList.xml in the clone file After you have set your settings correctly you can clone TV to USB to change the channel list. The channellist can be edited via CMND or you can do this using an xml editor tool. The folder name used in the root of the USB device containing the clone da...
Page 148 - Add an RF channel in the ChannelList.xml; For each; Add a media channel in the ChannelList.xml
- 147 - </Application> </ApplicationMap> <ThemeTV /> </TvContents> 12.2.1 Add an RF channel in the ChannelList.xml Open the ChannelList.xml file as described in the chapter ‘ChannelList.xml in the clone file’. For each RF channel you want to add you need to add an xml element...
Page 149 - When you use “; Add an IP channel in the ChannelList.xml; RoomSpecificSettings in the clone file; In below example, you see 3 TV’s in the list, all with a different setti
- 148 - <Media url= " file://subfolder/picture.jpg " /> <Setup presetnumber= " 23 " name= " picture " blank= "0" skip= "0" FreePKG= "1" PayPKG1= "0" PayPKG2= "0" TTV1= "0" TTV2= "0" TTV3= "0" TTV4= "...
Page 151 - LocalCustomDashboard in the clone file; ]. In this case the TV shall load the custom dashboard; Edit the T&C for hotspot; You only need to Change the ‘
- 150 - 12.4 LocalCustomDashboard in the clone file After you have set your settings correctly you can clone TV to USB to add your local custom dashboard. The folder name used in the root of the USB device containing the clone data: TPM181HE_CloneData/MasterCloneData/ Go to the local custom dashboar...
Page 152 - Install Netflix on TV; Netflix needs to be installed in your app control profile; Capture logs from TV on USB; Create a new text file on a FAT32 formatted USB stick
- 151 - { "Svc": "OfflineServices", "SvcVer": "4.0", "Cookie": 299, "CmdType": "Change", "Fun": "ApplicationControl", "CommandDetails": { "ApplicationDetails": { "ApplicationName": "Googlecast", &...
Page 153 - SICP commands version 1.4 supported in this product; Standby Mode
- 152 - • Rename the "New Text Document.txt" file to "TPVisionDebug.cookie" (including renaming the .txt into .cookie) • Connect the USB to TV • Reproduce the problem you have • Send 456789 info (notification should be seen that it's save to disconnect the USB), in case you do not ha...
Philips 50PFL5907/F7
User Manual
Philips 32PFL4508/F7
User Manual
Philips 39PFL2908/F7
User Manual
Philips 32PFL5708/F7
User Manual