Philips 43HFL5114/12 - Manuals

2.4 Power Cable • Insert the power cable into the POWER connector on the back of the TV.• Make sure the power cable is securely inserted inthe connector.• Make sure that the power plug, in the wall socket, isaccessible at all times.• When you unplug the power cable, always pull theplug, never pull t...

3 Remote Control 3.1 Key overview Top 1 -  Standby / On To switch the TV on or back to Standby. 2 - Youtube To open Youtube. 3 -  SMART INFO (Only in Professional Mode ON) To show information provided by the Hotel. 4 -  To open the Netflix App directly. With the TV switchedon or from standby.) • ...

1 -  Volume To adjust the volume level. 2 -     Colour keys Direct selection of options. 3 -  CLOCK To display the clock. 4 -  Channel To switch to the next or previous channel in thechannel list. 5 -  Mute To mute the sound or to restore it. 3.2 IR Sensor The TV can receive commands from a ...

5 Specifications 5.1 Environmental Product Fiche 43HFL6114U • Energy Efficiency Class : A• Visible Screen Size : 108 cm / 43 inch• On Mode Power Consumption (W) : 61 W• Annual Energy Consumption (kWh) * : 90 kWh• Standby Power Consumption (W) ** : 0.3 W• Display Resolution (Pixels) : 3840 x 2160p 50...

covered by the European Directive 2012/19/EU. Please inform yourself about the local separatecollection system for electrical and electronicproducts. Please act according to your local rules and do notdispose of your old products with your normalhousehold waste. Correct disposal of your oldproduct h...

TV Bottom • Network LAN - RJ45• HDMI 2 in - ARC - Ultra HD• Antenna (75 ohm)• USB 2 - USB 2.0• 12V DC out• 8  Audio out • DATA(RJ-48) 5.13 Dimensions and Weights(6114U) 43HFL6114U • without TV stand:Width 963.98 mm - Height 569.28 mm - Depth 74.5mm - Weight ± 9.44 kg• with TV stand:Width 963.98 mm ...

6 Connect Devices 6.1 Connect Devices Connectivity Guide Always connect a device to the TV with the highestquality connection available. Also, use good qualitycables to ensure a good transfer of picture andsound. When you connect a device, the TV recognizes itstype and gives each device a correct ty...

Note : • EasyLink might not work with devices from otherbrands.• The HDMI CEC functionality has different names ondifferent brands. Some examples are: Anynet, AquosLink, Bravia Theatre Sync, Kuro Link, Simplink andViera Link. Not all brands are fully compatible withEasyLink. Example HDMI CEC brandin...

you remove the CAM, you will no longer be able towatch the scrambled channels supported by theCAM. 6.3 Receiver - Set-Top Box Use 2 antenna cables to connect the antenna to theSet-top box (a digital receiver) and the TV. Next to the antenna connections, add an HDMI cableto connect the Set-top box to...

If the Blu-ray Disc player has EasyLink HDMI CEC,you can operate the player with the TV remotecontrol. 6.6 Headphones You can connect a set of headphones tothe  connection on the back of the TV. The connection is a mini-jack 3.5mm. You can adjust thevolume of the headphones separately. 6.7 Game Con...

Ideal Setting If you connect a computer, we advice you to give theconnection, on which the computer is connected, thecorrect device type name in the Source menu. If youswitch to Computer in the Source menu, the TV is set to the ideal Computer setting automatically. To set the TV to the ideal setting...

7 Videos, Photos andMusic 7.1 From a USB Connection You can view your photos or play your music andvideos from a connected USB flash drive or USB HardDrive. With the TV switched on, plug in a USB flash drive or aUSB Hard Drive to one of the USB connections. TheTV detects the device and will list you...

View Photos Open photo folder 1 - Press  CHANNELS, select  Sources. 2 - Select  Media Browser, select  Photos and press OK. View a photo 1 - Press  CHANNELS, select  Sources. 2 - Select  Media Browser, select  Photos and press OK. 3 - Select Photos and select one of photos, you can press  S...

3 - Mark as favourites 4 - Play all music 5 - Shuffle: play your files in a random order 6 - Repeat: plays all music in this folder once or continuously Music Options During playing the music, press  OPTIONS, select Info and press OK to... • Mark as favourites• Play all music• Shuffle: play your fi...

8 TV Guide 8.1 Using the TV Guide Open the TV Guide To open the TV Guide, press  TV GUIDE . The TV Guide shows the channels of the selected tuner. Press  TV GUIDE again to close. The first time you open the TV Guide, the TV scans allTV channels for programme information. This maytake several minut...

9 Games 9.1 Play a Game From a Game Console To start a game from a Game Console… Switch on the Game Console. Professional Mode OFF  Press  /  Home, select  Apps. Choose Sources and press OK. Start the game. Press  BACK repeatedly or press  EXIT or stop the app with its dedicated exit/stop butt...

10 Professional MenuApp 10.1 About the Professional MenuApp From the Professional Menu App, you can start anyactivity you can do with the TV. The left part of the Professional Menu App isorganised in rows… • Recommended  • TV Channels  • Cast  • Apps  • Games  • More  The upper right part of t...

radio channel just like you switch to a TV channel. Open a Channel List To open the current channel list… 1. Press  , to switch to TV. 2. Press  CHANNELS to open the current channel list. Select  All Chennels to show both TV and Radio channels. Select  to show only TV Channels. Select  to show ...

Channel Options Open Options While watching a channel, you can set some options. Depending on the type of channel you are watching(analogue or digital) or depending on the TV settingsyou made, some options are available. To open the options menu… 1 - While watching a channel, press  OPTIONS . 2 - P...

• Sleep Timer  : With the slider bar you can set the time to up to 180minutes in increments of 5 minutes. If set to 0minutes, the sleep timer is switched off. You canalways switch off your TV earlier or reset the timeduring the countdown.• Weather  : Display the observed temperature, it contains 5...

• Personal - The picture preferences you set duringthe first start up.• Vivid - Ideal for daylight viewing• Natural - Natural picture settings•  Standard - Most energy conscious setting - Factory setting• Movie - Ideal for watching movies• Game - Ideal for playing games• Computer - Ideal for connec...

11 Android TV HomeScreen 11.1 About the Android TV HomeScreen To enjoy the benefits of your Android TV, connect theTV to the Internet. Like on your Android smartphone or tablet, the Homescreen is the centre of your TV. From the Home sreenyou can decide what to watch by browsingentertainment options ...

Rating Level. Select the age and press OK. To switch off the agerating, select None. However, in some countries youmust set an age rating. Set Code and Change Code Press  /  Home>  Settings > Content rating. The child lock code is used to lock or unlock channelsor programmes. Set new code o...

your wireless network. If your network is not in the listbecause the network name is hidden (you switchedoff the SSID broadcast of the router), select Add NewNetwork to enter the network name yourself.• WPS - If your router has WPS, you can directlyconnect to the router without scanning for networks...

Mono / Stereo You can switch the sound of an analogue channel toMono or Stereo. To switch to Mono or Stereo… 1 - Tune to an analoge channel. 2 - Press  OPTIONS , select Mono/Stereo and press  (right). 3 - Select Mono or Stereo and press OK . 4 - Press  (left) to go back one step or press  BACK t...

4 - Select Search and press OK . You can enter a frequency yourself to find a channel or let the TVsearch for a channel. Press  (right) to select Search and press OK to search for a channel automatically. The found channel is shown on screenand if the reception is poor, press Search again. If you w...

12 Open SourceSoftware 12.1 Open Source License About Open Source License README for the source code of the parts of TP VisionNetherlands B.V. TV software that fall under opensource licenses. This is a document describing the distribution of thesource code used on the TP Vision Netherlands B.V.TV, w...

13 Help and Support 13.1 Troubleshooting Switch On and Remote Control The TV does not switch on • Disconnect the power cable from the power outlet.Wait for one minute then reconnect it.• Make sure that the power cable is securelyconnected. Creaking sound at startup or switch off When you are switchi...

13.2 Online Help To solve any Philips TV related problem, you canconsult our online support. You can select yourlanguage and enter your product model number. Go to www.philips.com/support On the support site you can find your country'stelephone number to contact us as well as answers tofrequently as...

14 Safety and Care 14.1 Safety Important Read and understand all safety instructions beforeyou use the TV. If damage is caused by failure tofollow instructions, the warranty does not apply. No modify this equipment without authorization ofthe manufacturer. Risk of Electric Shock or Fire • Never expo...

• Replacement of a battery with an incorrect type thatcan defeat a safeguard (for example, in the case ofsome lithium battery types).• Disposal of a battery into fire or a hot oven, ormechanically crushing or cutting of a battery, that canresult in an explosion.• Leaving a battery in an extremely hi...

15 Terms of Use 15.1 Terms of Use - TV 2020 © TP Vision Europe B.V. All rights reserved. This product was brought to the market by TP VisionEurope B.V. or one of its affiliates, hereinafter referredto as TP Vision, which is the manufacturer of theproduct. TP Vision is the warrantor in relation to th...

16 Copyrights 16.1 HDMI HDMI The terms HDMI and HDMI High-DefinitionMultimedia Interface, and the HDMI Logo aretrademarks or registered trademarks of HDMILicensing Administrator, Inc. in the United States andother countries. 16.2 Dolby Audio Dolby, Dolby Audio, and the double-D symbol aretrademarks ...

Index A Android Settings 35 Audio Language 36 Audio Language, Primary 36 Audio Language, Secondary 36 B Blu-ray Disc player, connect 15 C CAM, Conditional Access Module 14 Channel 35 Channel List 35 Channel List, about 35 Channel List, open 35 Channel, Antenna Installation 37 Channel, Installation 3...

- 10 - 2. Requirements before starting the installation of a TV Before starting the installation, make sure that you have everything you need at hand. You need a USB device and a remote control. 2.1 Remote control 2.1.1 Master remote control It’s best to use the green RC as it h as specific function...

- 11 - 2.1.2 Guest remote control 22AV1905A (xxHFL5014 - xxBFL2214) 22AV1905B (xxHFL5x14x) 22AV2226A (xxHFL6214U) 22AV2005B (xxHFL5214U) Note: The 22AV1905B remote control can be ordered as an accessory if you would already have a 22AV1905A (2019) and would like to replace it with the same remote co...

- 12 - 2.1.3 Accessory remote controls 22AV1604B Healthcare RC 22AV1601B Easy RC 22AV2005B Digit RC 22AV2025B Voice RC 22AV2204A Hygienic RC 22AV2226A Hygienic RC Note: previous RC’s with digits will NOT work with the 5014/6014 TV series as the code sent by the RC for some keys is different. If your...

- 13 - You will see the battery status of the RC, the setting programmed in the RC (default = blue) and the setting in TV. Below you can find a table how to match the TV settings and the settings as they can be used in the guest RC: Mode: Buttons combination: Blue (default) “ Home ” and “ Blue ” Yel...

- 14 - • You can change the RC to RC5 mode by pressing 5 seconds “ Menu ” and “ Volume up ” at the same time. • You can change it back to RC6 mode by pressing 5 seconds “ Mute ” and ” Channel up ” at the same time. You can also use this RC for multi RC. More details can be found in the ‘Professional...

- 15 - • Using the guest remote control, press the following keys sequentially: “3 1 9 7 5 3 mute” or “mute left right up down ok” Note: The sequence: “3 1 9 7 5 3 mute” will not show the [ Professional Settings ] if [ High Security ] option is enabled, it will only work using the ‘master RC’ 2.3 So...

- 16 - o After the update is done and the USB stick can be extracted • It’s required to first upgrade the TV and afterwards to perform the installation The latest software version and cloning data can be stored on the same USB drive for a 2 in 1 action: software upgrade and cloning du ring the insta...

- 17 - 3. Find out the state of the TV It is important to know if a TV is in Virgin mode (out of the box) or installed before. When installing a newly bought TV, it will be in virgin mode. 3.1 Virgin mode If you can see b elow screen, you know that the TV is in ‘out of the box’ state and you can ins...

- 19 - 4. Reinstall TV 4.1 Reinstall the TV manually If you want to start an installation from scratch you can always reinstall the TV. All settings will be reset to the default values and channel list will be cleared. Note: Some settings like webservice url, roomID, manual date and time, profession...

- 20 - Select [ Yes ] and press the “ OK ” button to reinstall the TV. You will see that the TV will apply a reset and restart into IIC mode. 4.2 Reinstall via a script in the clone file To automatically reinstall the TV, load a new clone file and load new SW you can use this script. In the ‘MasterC...

- 21 - 5. Virgin installation – Instant Initial Cloning (IIC) Out of the box a new TV will be in virgin mode. This means that you will have to go through the Instant Initial Cloning wizard to apply the first settings of the TV. You might need to wake up the TV from standby. When starting up the TV i...

- 22 - When you [ Confirm ] the Room ID you will go the last screen with information about the professional menu. If you [ Confirm ] again, you will exit IIC and go to the Professional Menu to make the configuration you require on the TV. If your configuration is done you can download the clone file...

- 23 - o Downloading and installing to TV will start o Is you are installing software, you might see some reboot logos and waiting animation. The software update might take several minutes. All depends on the file size and download speed.

- 24 - o Once the procedure has finished, a countdown will start of 30 minutes, after this time the TV will automatically go to standby and is ready to be used. You can also still go to the [ Professional Settings ] by activating the button if you still need to change some settings. You can also sti...

- 25 - 6. Professional Settings 6.1 General information In this chapter, you can find information about all professional settings that can be changed. To start you have to open the [ Professional Settings ] menu. Using the guest remote control, press the following keys sequentially: “3 1 9 7 5 3 mut...

- 26 - 6.2 Overview o Navigate to the [ Overview ] menu o Open this menu item o You will get an overview screen with all the settings that are set in the TV, this overview can be used to see the settings without having to navigate to all menu’s separately o Using the “ arrow up/down ” buttons you ca...

- 30 - MHz. So, if you do a playout on another frequency as set in the TV, the TV will do a fallback scan in order to find it. Make sure the frequency is not used by any other tv-, radio- or data mux. o [ Scan Mode ]: Define when the TV shall scan the RF stream for updates ▪ When [ Legacy ] is selec...

- 35 - 6.5 Identification Settings 6.5.1 RoomID o Navigate to the [ Identification Settings ] [ RoomID ] menu o This is a (maximum) 5 digits number that can be used to distinguish between different floors/rooms/setups when using CMND Intention is to fill in the room number in this field 6.5.2 Premis...

- 36 - 6.5.4 Device Name o Navigate to the [ Identification Settings ] [ Device Name ] menu o You will see below items: o [ Force Custom Name ]: When [ On ] the custom defined name will be used, when [ Off ] the RoomID will be used (RoomXXXXX) o [ Custom Name ]: Define the TV name to show on mobile ...

- 38 - 6.7 Dashboard o Navigate to the [ Dashboard ] menu o You will see the screen on the left o Navigate to the [ Dashboard ] [ Select Dashboard ] menu o You will see below items: o [ Philips Home ]: You need to press “ OK ” to access and change the Philips Default Dashboard configuration Note: Ho...

- 39 - when set to [ On ], when [ Off ] the Default Dashboard will be launched when no connection can be made o Navigate to the [ Dashboard ] [ Reload ] menu o When CDB is connected and connection drops, the SI is free to choose to either stay on CDB or switch to Local CDB. However, if connection re...

- 40 - o Navigate to the [ SmartTV Server Settings ] menu o You can configure your apps using a wizard under [ Features ][ Apps ][ Manage ]. Once you have done this wizard you will be able to change your settings in this menu. o You will see below items: o [ SmartTV Mode ]: You can set the SmartTV M...

- 41 - Note: See chapter “Manage Apps” to see how you can use the website to configure your personal profile Note: Apps will only be synchronized to the server when you have exited the Professional Session. After exiting the Professional Session, you will see the app list appear in your personal pro...

- 43 - In the user menu under Apps this will split up the installed apps per category or show all apps o Navigate to the [ App Sync ] menu o You will see below items: o [ TV to SmartTV Server ]: You can select [ On ] to upload apps to the Philips servers so they can be synced ag ain to other TV’s or...

- 50 - Note: Using CMND you will be able to create and send banners to TV, using triggers in CMND you can automate this 6.8.12 TalkBack o Navigate to the [ Talkback ] menu o You will see below items: o [ Enable ]: You can enable to show the talkback option in the dashboard using [ Yes ] or disable u...

- 54 - 6.10 Sources o Navigate to the [ Sources ] menu o You will see the screen on the left o Navigate to the [ Enable Sources ] menu o You will see a list of externals (including USB media browser). You can enable or disable sources to be available in the menu Note: The list of sources is dependin...

- 56 - Note: [ Standard ] enables up to 2160p60 4:2:0, [ Optimal ] enables up to 2160p60 4:4:4 and [ Off ] enables up to 1080p60. The list of sources is depending on the hardware in relation to the screen size and can be different from the screenshot 6.11 Date and Time o Navigate to the [ Date and T...

- 59 - o Navigate to the [ OnScreen Clock Display ] menu o You will see below items: o [ Digital Clock ]: You can set the clock to be shown as a digital clock o [ Analogue Clock ]: You can set the clock to be shown as an analogue clock o Navigate to the [ Date Format ] menu o You will see below item...

- 61 - o Navigate to the [ Wake on LAN (WoL) ] menu o You will see below items: o [ Off ]: Wake up via LAN is disabled o [ On ]: Wake up via LAN enables an external Server to wake up the TV from complete Standby (green) using the wired network connection. Once you wake up TV using WoL, the TV will g...

- 64 - 6.13 Input Control o Navigate to the [ Input control ] [ Local Keyboard Control Lock ] menu o You will see below items: o [ Off ]: All local keyboard buttons are enabled o [ On ]: All local keyboard buttons are disabled except for the power button o [ All ]: All local keyboard buttons are dis...

- 67 - ‘Updated’. You can press [ Done ] to close the wizard ▪ When no updates are found you will see a ‘No updates’ message say ing that your RC is up to date, you can close the wizard by pressing [ Done ] 6.14 Advanced o Navigate to the [ Advanced ] menu o You will see the screen on the left o Nav...

- 72 - 6.15 TV Settings o Navigate to the [ TV Settings ] menu o You will see the screen on the left 6.15.1 Picture o Navigate to the [ Picture ] menu Note: These settings will be applied when using the [ Switch on Settings ][ Picture Settings ][ Picture Style ][ Personal ] o You will see below item...

- 77 - rendered along with main audio. This can also be turned [ Off ] ▪ [ Speech ]: Select [ Descriptive ] to hear the audio commentary or select [ Subtitles ] to read the spoken words Note: Above menus are only available if [ Accessibility ][ Audio Description ] menu is set to [ On ] 6.16 Android ...

- 78 - o Navigate to the [ Reinstall TV ] menu o When you press “ OK ” you will Reinstal l the TV, your TV will reboot and start in IIC mode (like the TV comes out of the box). All the settings will be reset to the factory settings except for RoomID, professional mode, WebServices Server URL, Secure...

- 79 - 7. Professional setting wizards 7.1 Philips Home Dashboard configuration The new UI also called `Philips home Dashboard` has received a major update in order to be more content-richer, easy to use, fast moving, smart, adaptive and is fully customizable. Default UI: Adapted UI: You are able to...

- 83 - 7.2 Manage Apps 7.2.1 Manage Apps configuration wizard There are two ways to configure your apps in the TV. • First is to create your own Profile in order to manage the apps through the web portal (https://appcontrol.cmnd.pro/). The initial configuration is to be done through the TV in order ...

- 84 - • If you choose [ Yes ] or [C ontinue ] in the previous screen, you can choose to use an existing AppControl account using [ Yes ] or [ No ] if you want to configure the TV without an AppControl account. • If you select [ No ], you will need to choose to [ Use Existing ] or create a [ New/Ret...

- 86 - From here onwards, you can access the menu to control your apps and manage them as explained in the ‘Apps’ chapter under ‘Professional Settings’. 7.2.2 Installing Apps using Google Play Store After you have gone through the wizard, you can access the menu to manage all the apps. If you need t...

- 88 - After signing in you will see Google Play You can navigate and try to find apps or use the search function in the right upper corner to find apps you want to install. Once you have found the app you were looking for you can select and open the app in order to see more details or install the a...

- 89 - Once downloading and installation is ongoing, you will see the progress. Best is to wait until the installation is completed before installing a new app. You cannot see ongoing progress in the Google Play menu. The installation of the apps needs to be finished else they will not get uploaded ...

- 90 - we have extended the already existing AppControl framework from previous generations to allow easy and remote management of the apps on the TV. Using the AppControl function, you can re-order and remove apps on the. Adding new apps from Google Play still requires you to do this locally on one...

- 91 - • Locations : Here you can configure locat ions where TV’s are installed but this is not required, this location might be used later on for statistics information. When you add a location When adding a location, you will be requested to fill in a Geonames ID. You can find the ID on www.geonam...

- 92 - Once created you will see the details of the profile, the default apps and the available Hotel TV Categories. If required you can change the ‘Profile name’ using the [ Change Name ] in the upper right corner o [ + Import AutoProfiles ]: As earlier explained you can generate an ‘Auto generate ...

- 94 - You can see than you have actions available next to the app you want to authorize for and also the current status. Note: Further details on how to enable ‘Netflix’ can be found in the chapter “ Install Netflix on TV ” After you [ Apply ], you will see the Terms and Conditions that you have to...

- 95 - { "packageName":" com.android.myapp ", "packageURI":" ./myapp.apk ", "silentAction":"install", "packageType":"local", "packagePosition": 10 , "packageShowHide":"1", "packageCountry":[ "ALL"...

- 96 - • Backdrop • Colours • PhilipsWelcomeScreen You can add your own screensaver application by loading it as a local apk in TV. With the correct settings, it will be detected as screensaver application. All details are explained in the JEDI documentation that can be obtained after signing an NDA...

- 99 - 7.4 Manage ThemeTV To manage ThemeTV you have to go to the [ Professional Settings ][ Features ][ ThemeTV ][ Manage ] menu. Using this feature, you will be able to add themes in the channel list selection. You can organize the channel list per theme or per language according to your preferenc...

- 100 - • The possibility to add new themes (maximum 10). You can create a custom theme or add one from the predefined list. When adding a custom theme, this will not be translated when customers are using different languages. Note: The icons you see below are reflected in the channel list and the H...

- 102 - 7.5 Manage MyChoice To manage MyChoice you have to go to the [ Professional Settings ] [ Features ] [ MyChoice ] menu. When you open this menu, you will see the possibility to configure MyChoice. More information can be found on http://www.my-choice.tv/. [Enable] allows you to configure the ...

- 103 - You can navigate in this grid and by selecting an icon in Package 1 or Package 2 and by pressing “ OK ” you will see that the selection of your choice is highlighted. Doing so for all channels you can put channels in the package you want. Customers who have no PIN Customers who have PIN for ...

- 104 - Compared to the previous platform the MyChoice packages are not mutually exclusive, meaning that it will be possible to activate both package 1 and package 2 at the same time. Please keep this in mind when creating the MyChoice packages as it requires a different mindset during the creation....

- 106 - 7.6 Manage Scheduler Navigate to the [ Professional Menu ] [ Features ] [ Scheduler ] menu, this function allows to set up different schedules on same or different sources when the feature is enabled. Navigate to the [ Professional Menu ] [ Features ] [ Scheduler ] [ Manage ] and open the me...

- 108 - o [ Priority/Order ]: shows the priority based on the list of defined schedules You can change the order using the “ Yellow ” and “ Blue ” keys to move the selected schedule up and down. The highest schedule has the highest priority. o [ Delete Schedule ]: allows you to delete the individual...

- 109 - 7.7 Manage Channels You can manage your channels, this means you can rename, reorder, hide/show, blank/non-blank the channels. This can also be done using CMND. To manage your channels, you have to go to the [ Professional Settings ] [ Channels ] [ Manage ] menu. When you open this menu, you...

- 111 - 7.7.5 Remove channels You can select a channel you want to remove and press ” Options ”, select [ Remove ]. You will get a confirmation screen where you can select [ Yes ] to remove the channel from the list. 7.7.6 Re-number channels Even if you cannot see the channel number in your TV, you ...

- 112 - 7.8 Channel installation wizard 7.8.1 Install RF channels To install channels, you have to go to the [ Professional Settings ] [ Channels ] [ RF Channel Installation ] menu. In this menu you can go to [ Search for Channels ] or do a [ Digital: Manual Installation ] or do an [ Analogue: Manua...

- 113 - o [ Quick reinstall ]: This is to install all channels with default settings o [ Advanced reinstall ]: This is to do a full re-installation which takes you through each step including changing the installed country Note: Both reinstall options will replace the current channel list o When sel...

- 114 - o In the next screen you can [ Start ] or [ Configure ] some more settings, these settings are also available in the professional menu. If you have changed the setting you can return back using the color keys as indicated on the screen Note: By default [ Quick Scan ] is used, you need to cha...

- 116 - 7.9 Network installation wizard To connect to a network, you have to go to the [ Professional Settings ] [ Wireless and Networks ] [ Connect to Network ] menu. Note: Some screens will be shown depending on your settings or selections made, some screens will not be shown o Wired, Wireless, WP...

- 117 - 7.10 Crestron Connected wizard In order to configure the Crestron application, you need to make sure you are connected to the internet. In the [ Professional Settings ][ Advanced ][ Select TV Control App ], you need to select [ Crestron Connected ] and press “ OK ” to start the configuration...

- 119 - 7.10.5 Room view settings This is a section that you can [enable] by an ON/OFF toggle. The default for this feature is OFF. This is a section to configure the Room View software. For configuring a connection with RoomView the following parameters are needed: [Room IpID] : The unique identifi...

- 120 - • Welcome Screen: When the TV has the Welcome screen APP on top, it cannot be controlled via an external controller, therefore you need to disable the Welcome Screen 7.10.10 Cloning In the clone file, you will find the details of this wizard in the professional apps folder after cloning to U...

- 121 - 8. Guest Menu The guest menu is the menu the guest sees when his TV is on. Depending on the settings and installation, you will see the menu as explained in next chapters. 8.1 Recommended In the recommended page you will see (depending on the settings and installed content): • Information (d...

- 122 - 8.3 Cast In the Cast page you will have the possibility to cast from external devices to the TV. See below for more details. 8.3.1 What is Chromecast built-in? Chromecast built-in is a platform that lets you cast your favorite entertainment from your phone, tablet or laptop right to your TV....

- 123 - This setting only enables the feature but the feature cannot function without setting up the way to authenticate or to set up the P2P environment. Therefore, the second setting that is needed is to switch [ Secure Sharing ] to [ On ]. Once this is set the guest will already be able to connec...

- 126 - When [ Internet Hotspot ] is turned [ Off ] it is possible that the connecti ng guest device doesn’t have any Internet connection. Not all devices support concurrent connections to an infrastructure network and a P2P network. 8.3.4 Impact The way casting works will have an impact on the prem...

- 127 - 8.5 Games By default, no game apps are installed and hence you will not see the games page. If you have installed apps that are listed in the category “Games”, the games page will appear automatically and the games apps will be shown in this page.

- 128 - 8.6 More The amount of menu items you will see will depend on your settings. 8.6.1 Settings The first shelf is settings. Here you can change picture settings, sound settings, picture format, the menu language and Parental Control. When opening one of the menu items, a detailed menu to change...

- 129 - Note: Parental Control availability depends on the settings in the professional menu 8.6.2 Features The second shelf is all about features. Here you can set the alarm, a sleep timer, start the hotspot to make a connection, check the weather forecast, open the program guide or start talkback....

- 131 - 8.6.2.5 TV Guide You can access the TV guide via this menu. 8.6.2.6 Talkback Talkback is an accessibility service that helps vision-impaired users to interact with the TV. It uses spoken word and other audible feedback to let you know what's on your screen. You can enable talkback using “ OK...

- 132 - Note: The account will be removed on checkout or in case when no PMS is used, when TV is put to STBY depending on the Clear User Data settings in the professional menu Depending on your settings (PMS enabled for example), you will see more options in [ Personal ]. 8.7 Top icons 8.7.1 Google ...

- 133 - You can set the alarm at the time and the channel you want, on one of the available sounds and on the volume you want. Once you have set a time you will also see the time in the top icons Note: The alarm can also be set through the [ More ][ Features ][ Set alarm ] menu or th rough the “ clo...

- 135 - 8.8.3 Greeting guest The first one might be small but it can address the guest entering the room personally. You can add the name of the person checking in to the Dashboard. Note: Showing the guest name can also be done inside the SmartInfo pages. 8.8.4 Bill In case the Hotel’s PMS allows it...

- 136 - When “Do Not Disturb” is turned Off, the TV will immediately interrupt any guest view when receiving a new message and it will show the message full screen for the guest to read. Of course, this in case t he TV is on at that moment, when it’s turned Off the message will be delivered upon sta...

- 137 - 8.9 SmartInfo The SmartInfo feature can be used as a Browser or as an Application. SmartInfo can be set as Switch On Feature. This means that the TV will start up on the SmartInfo you have created and loaded in TV. SmartInfo can also be opened using the info button on the RC. 8.9.1 SmartInfo...

- 139 - 9. IP TV installation 9.1 Setup It’s strongly advised to use fast mode in combination with IPTV because the boot time otherwise will be too slow. There are some limitations for the multicast stream that can be tuned: • TS stream needs to be compatible with DVB standard • Maximum bit rate 18M...

- 140 - 9.3 Installing IP Channels Open the ChannelList.xml file as described in the chapter ‘ChannelList.xml in the clone file’. For each IP channel in your network, an xml element needs to be inserted within the <ChannelMap></ChannelMap> brackets with the following format: (The green e...

- 141 - 10. Make TV visible in CMND This chapter describes the TV settings to connect to a CMND server over IP or RF. For the CMND settings please refer to the CMND manual on http://www.cmnd.io . You at least need CMND 7. 10.1 Connect the TV via IP 10.1.1 Change the TV settings The TV can connect to...

- 142 - First 10 Last 10 http://192.168.103.1:8080/webservices.jsp http://192.168.103.245:8080/webservices.jsp http://192.168.103.2:8080/webservices.jsp http://192.168.103.246:8080/webservices.jsp http://192.168.103.3:8080/webservices.jsp http://192.168.103.247:8080/webservices.jsp http://192.168.10...

- 143 - 11. Custom Dashboard A custom dashboard or CDB is a method to replace the default UI of the TV with a custom UI. With a custom dashboard, it is possible to create a look and feel that matches the theme of the hotel/hospital/… or to add extra features like video on demand. The custom dashboar...

- 144 - 12. Examples 12.1 Custom channel logos 12.1.1 How to extract the channel logos You can extract the channel logos from the TV in following way: • Insert an empty USB stick into the TV and enter the Professional Settings • In the Professional Settings, navigate to [ Upgrade and Clone ][ Clone ...

- 145 - correct path is used. See below example, preset 1 contains a default channel logo and preset 2 contains a custom channel logo, notice the different paths Preset Channel name Logo path Logo 1 één HD logo=" file://default/3727.png ” 2 Philips logo=" file://custom/Philips.png ” Below sc...

- 146 - 12.2 ChannelList.xml in the clone file After you have set your settings correctly you can clone TV to USB to change the channel list. The channellist can be edited via CMND or you can do this using an xml editor tool. The folder name used in the root of the USB device containing the clone da...

- 147 - </Application> </ApplicationMap> <ThemeTV /> </TvContents> 12.2.1 Add an RF channel in the ChannelList.xml Open the ChannelList.xml file as described in the chapter ‘ChannelList.xml in the clone file’. For each RF channel you want to add you need to add an xml element...

- 148 - <Media url= " file://subfolder/picture.jpg " /> <Setup presetnumber= " 23 " name= " picture " blank= "0" skip= "0" FreePKG= "1" PayPKG1= "0" PayPKG2= "0" TTV1= "0" TTV2= "0" TTV3= "0" TTV4= "...

- 150 - 12.4 LocalCustomDashboard in the clone file After you have set your settings correctly you can clone TV to USB to add your local custom dashboard. The folder name used in the root of the USB device containing the clone data: TPM181HE_CloneData/MasterCloneData/ Go to the local custom dashboar...

- 151 - { "Svc": "OfflineServices", "SvcVer": "4.0", "Cookie": 299, "CmdType": "Change", "Fun": "ApplicationControl", "CommandDetails": { "ApplicationDetails": { "ApplicationName": "Googlecast", &...

- 152 - • Rename the "New Text Document.txt" file to "TPVisionDebug.cookie" (including renaming the .txt into .cookie) • Connect the USB to TV • Reproduce the problem you have • Send 456789 info (notification should be seen that it's save to disconnect the USB), in case you do not ha...