Philips 42PFL7409D/30 - Manuals

5 Remote control 1 28 2 3 67 8 9 10 1314 17 20 18 15 16 27 24 23 21 22 25 12 11 4 5 26 19 a ( Standby-On ) Switches the T V to standby if it is on. Switches on the T V if it is in standby. •• 3 Your product Congratulations on your purchase, and welcome to Philips! To fully bene t from the suppor t t...

7 Switch channels Press BACK A /CH on the remote control to return to the previously viewed channel. Press CH +/- on the remote control or P/CH +/- on the side of the T V. Press OK to use the channel matrix. Enter a channel number using the Numeric buttons . Note When you use a favourite list, you c...

8 Adjust TV volume To increase or decrease volume Press +/- . Press VOLUME +/- on the side of the T V. To mute or unmute sound Press to mute the sound. Press again to restore the sound. •• •• Watch connected devices Note For easy access, add new devices to the home menu before selec ting them. • Use...

9 Install channels The rst time you set up your TV, you are prompted to select a menu language and to install TV and digital radio channels (if available). Check for TV channels or radio stations You can check for the availability of T V channels or radio stations that have been launched by the broa...

10 4 Press OK to store the ser vices. 5 Press to return to the previous menu or press DIGITAL MENU to exit. Install digital channels manually You can manually install digital ser vices by keying the channel number. Note If you are not in the digital mode, press ANALOG/DIGITAL . • 1 Press DIGITAL MEN...

11 Set your preferences Set your language You can select your preferred language for system menu and subtitle. Note If you are not in the digital mode, press ANALOG/DIGITAL . • 1 Press DIGITAL MENU . 2 Select [Preferences] > [Language] and press . 3 Press or to select System or Subtitle and press...

12 Note If [Enable Pin Protection] is Of f, selec t On to proceed. • 3 Enter the default PIN code “1234” with the numeric but tons (0 -9).You can access the menu now using the default PIN code. 4 Press or to highlight [On] and press OK to turn on PIN code protection. Change your PIN code 1 Turn on P...

13 Add all services to a favourite list 1 Press DIGITAL MENU . 2 Select [Favorites] > list number ( List 1 to List 4 ) > [Add all services] . and press . 3 Select [ Yes] and press OK to con rm adding all the ser vices. 4 Press to return to the previous menu or press DIGITAL MENU to exit. Remov...

14 4 Press to return to the previous menu or press DIGITAL MENU to exit. Use the Electronic Programme Guide EPG is an on-screen guide available for digital channels. EPG allows you to: View a list of digital programmes being broadcast View upcoming programmes Group programmes by genre Set reminders ...

15 [Setup] Accesses menus to adjust picture, sound and other T V set tings. [Add new device] Adds new devices to the home menu for easy access. 3 Press OK to con rm your choice. 4 Press ( Home ) to exit. Remove devices from the home menu If a device is no longer connected to the T V, remove it from ...

16 [HD Natural Motion] Reduces eld and line icker to display movement smoothly. You can switch HDNM on or off. [100Hz LCD] Not available in all models. Sets the TV refresh rate to a maximum of 100Hz to provide superior motion sharpness, better black level, high contrast with a icker-free, quiet imag...

17 Use smart sound Use smar t sound to apply pre-de ned sound set tings. 1 Press SOUND . The [Smart sound] menu appears. 2 Press to select a smar t sound set ting: [Standard] Adjusts sound set tings to suit most environments and types of audio. [News] Applies sound set tings ideally suited for spoke...

18 Add a channel to a favourite list Tip View all channels before adding a channel to a favourite list. • 1 When watching T V, switch to the channel you want to add to a favourite list (see ‘ Switch channels’ on page 7 ) . 2 Press OPTIONS . The channel options menu appears. 3 Press to select [Mark a...

19 2 Select [Setup] > [Features] > [On timer] > [Activate] . 3 Press OK . 4 Press to set the time and channel. Tip To switch of f [On timer] , selec t [OFF] in the [On timer] menu. • Set or change your PIN code 1 Press ( Home ). 2 Press to select [Setup] > [Features] > [Change code] ....

20 Select a subtitle language on digital TV channels Note When you selec t a subtitle language on a digital T V channel as described below, the prefer red subtitle language set in the installation menu is tempor arily over r uled. • 1 Press DIGITAL MENU . 2 Press to select [Preferences] > [Langua...

21 Tip Press BROWSE to switch between thumbnail and le browsing views. • Disconnect a USB storage device Caution Follow this procedure to avoid damage to your USB stor age device. • 1 Press BACK A /CH to exit the [USB] menu. 2 Wait for ve seconds before disconnecting the USB storage device. View pho...

22 Use Scenea to display a picture as TV wallpaper You can use the Scenea feature to display a still picture as wallpaper on your TV. This feature is for home mode only. Activate Scenea Single-picture wallpaper Press SCENEA on your remote control. The default or pre-loaded picture is displayed. Note...

23 Step 2 Download the latest software 1 Connect the USB storage device to a computer with internet connection. 2 Locate and open the le update.htm on your USB storage device. 3 Read the on-screen instructions and click the Send ID but ton. If a new sof tware is available, the update is downloaded t...

25 a T V ANTENNA Signal input from an antenna, cable or satellite. b AUDIO IN L /R Audio input from devices that require a separate audio connection, such as a computer. c VGA Video input from a computer. d SPDIF OUT Digital audio output to home theatres and other digital audio systems. e CVI ( Y Pb...

26 Connect a computer Before you connect a computer to the TV Set the monitor refresh rate on your computer to 60Hz. Press FORMAT and change the T V picture format to [Unscaled] . Connect a computer with one of the following connectors: Note Connec tions via DVI or VGA require an additional audio ca...

27 6 If available, press or to select the audio connector your device is connected to and press . 7 Switch on your device and check for video and audio output. 8 If there is video and audio output, press OK . Repeat the procedure until all devices are correctly assigned to connectors. HDMI cable and...

28 EasyLink buttons You can control EasyLink-compliant devices with the following but tons on the remote control of your T V. Button EasyLink function ( Play/ Pause ) Star ts, pauses or resumes playback on your EasyLink device. ( Stop ) Stops playback on your EasyLink device. ( Record ) Star ts or s...

29 Use a Kensington lock There is a Kensington security slot at the back of the TV. Prevent theft by looping a Kensington lock between the slot and a permanent object, such as a heavy table. Enable or disable EasyLink Note Do not enable Philips EasyLink if you do not intend to use it. • 1 Press ( Ho...

30 Tuner/Reception/Transmission Aerial input: 75ohm coaxial (IEC75) T V system: PAL BG , SECAM BG , PAL I, PAL DK , SECAM DK , NTSC M Video playback : NTSC , PAL, SECAM Multimedia Connection: USB Playback formats: H.264, MPEG4, JPEG, MP3 Container Video Codec Audio Codec File extension AVI MPEG 4 SP...

32 TV channel issues Previously installed channels do not appear in the channel list: Check that the correct channel list is selected. No digital channels were found during the installation: Ensure that you have a digital T V subscription. Contact your digital T V ser vice provider. Picture issues T...

33 USB connection issues USB device content is not displayed: Check that the USB storage device is set to ‘Mass Storage Class’ compliant, as described in the storage device’s documentation. Check that the USB storage device is compatible with the T V. Check that the audio and picture le formats are ...

34 E EasyLink disable 29 enable 29 Environmental care 4 F Factory settings 24 Favourite list select 18 set up 18 H HDMI cable troubleshooting 33 Home mode 24 I Installation automatic 31 manual 31 L Language troubleshooting 32 Location 24 Lock T V 19 M Menu child lock 19 language 32 main menu 15 trou...