Philips 32PFL5404/60 - Manuals

5 Disposal of your old product and batteries Your product is designed and manufactured with high quality materials and components, which can be recycled and reused. When this crossed-out wheeled bin symbol is at tached to a product it means that the product is covered by the European Directive 20 02...

7 Remote control 1 28 2 3 4 5 6 7 8 9 10 1314 17 19 20 18 1516 27 24 23 21 22 26 25 12 11 3 TV overview This section gives you an over view of commonly used TV controls and functions. Side controls and indicators a POWER : Switches the product on or off. The product is not powered off completely unl...

9 Note If you cannot locate your remote control and • want to switch on the T V from standby, press P/CH +/- or SOURCE at the side of the T V. Switch channels Press • P +/- on the remote control or P/CH +/- on the side of the T V. Enter a channel number using the • Numeric buttons . Use the channel ...

10 Adjust TV volume To increase or decrease volume Press • +/- . Press • VOLUME +/- on the side of the T V. To mute or unmute sound Press • to mute the sound. Press • again to restore the sound. Use teletext 1 Press MHEG/TELETEXT . The main index page appears. » 2 Select a page as follows: Press the...

11 Remove devices from the home menu If a device is no longer connected to the TV, remove it from the home menu. 1 Press ( Home ). 2 Press to select a device to remove. 3 Press OPTIONS . The » [Remove device] list appears. 4 Press OK and select [Remove] to remove the device. The selected device is r...

12 • [Tint] Adjusts the colour balance in an image. • [Custom tint] Customises tint set ting. • [Pixel Plus HD] Adjusts picture quality to optimal contrast, colour and sharpness.• [Dynamic contrast] Enhances contrast. A [Medium] set ting is recommended. • [Dynamic backlight] Adjusts brightness of th...

13 Use smart sound Use smar t sound to apply pre-defi ned sound set tings. 1 Press SOUND . The » [Smart sound] menu appears. 2 Press to select one of the following smar t sound set tings.• [Standard] Adjusts sound set tings to suit most environments and types of audio. • [NEWS] Applies set tings for ...

14 Select teletext subpages A teletex t page can hold several subpages. Subpages are displayed on a bar nex t to the main page number. 1 Press MHEG/TELETEXT . The teletext screen appears. » 2 Select a teletex t page with subpages. 3 Press to enter a subpage. The subpage appears. » 4 Press to switch ...

15 Tip When watching T V, press • OPTIONS > [Mark as favourite] to save the cur rent channel into a favourite list. Remove a channel from a favourite list Note Selec t the favourite list to edit, before • removing a channel . 1 When watching T V, press OK to display the channel grid. 2 Press OPTI...

16 Use TV lock You can prevent your children from watching cer tain programs or cer tain channels by locking the TV controls. Set or change the TV lock code 1 Press ( Home ). 2 Press to select [Setup] > [Features] > [Set code] . 3 Press to enter the code setup. 4 Enter your code using the Nume...

17 Use the TV clock You can display a clock on the TV screen. Set the TV clock 1 Press ( Home ). 2 Select [Setup] > [Features] > [Clock] The » [Clock] menu appears. 3 Press or Numeric buttons to enter time. 4 Press [Done] to confi rm. 5 Press ( Home )to exit. Use Scenea Scenea transforms your T...

18 Use sleeptimer with Scenea wallpaper By default, your TV displays the Scenea picture or slideshow for 120 minutes before entering standby mode. If sleeptimer is enabled, the Scenea picture or slideshow is displayed for the duration of the sleeptimer (see ‘Use timers’ on page 15 ). Use Eco mode wi...

19 Tip When in full screen mode, press • to move between photos. View a slide show of your photos 1 When a full screen image of a photo is displayed, press OK or . A slide show begins from the selected » image. 2 Press: • OK or to pause the slide show. The » icon appears. Press • or to move between ...

20 Change TV preferences 1 Press ( Home ). 2 Select [Setup] > [Installation] > [Preferences] . 3 Press OK or to enter [Preferences] . • [Location] Optimises T V set tings for your location - home or shop. • [ Volume bar] Displays the volume bar when you adjust the volume. • [EasyLink] Enables ...

21 3 Press to enter [Decoder] . 4 Press to enter [Channel] . 5 Press to select channel number to map to the decoder/descrambler channel. 6 Press OK . 7 Press to select and enter [Status] . 8 Press to select the connector used by the decoder/descrambler ( [None] or [EXT 1] ). 9 Press OK . 10 Press ( ...

22 Step 2 Install Channels Select your countr y for proper channel installation. 1 Press ( Home ). 2 Press to select [Setup] > [Installation] > [Channel install.] > [Channel assistant] . 3 Press to select your countr y and then to go to the nex t step. 4 Select [Start] and press OK to re-in...

23 Select your system Note Skip this step if your system set tings are • cor rec t. 1 Press ( Home ). 2 Press to select [Setup] > [Installation] > [Channel install.] > [Analogue: Manual] . The » [Analogue: Manual] menu appears. 3 Press to select and enter [System] . 4 Press to select your c...

24 Skip channels 1 Press ( Home ). 2 Press to select [Setup] > [Installation] > [Channel install.] > [Analogue: Manual] . The » [Analogue: Manual] menu appears. 3 Press to select and enter [Skip channel] . 4 Press to select [ Yes] and press OK to skip current channel. The selected channel i...

25 Reorder channels After you install channels, you can rearrange the order in which they appear. 1 When watching T V, press OK to display the channel grid. 2 Press OPTIONS . The channel options menu appears. » 3 Press to select [Reorder] , then press OK . 4 Select the channel to rearrange, then pre...

26 b HDMI 1 Digital audio and video input from high-defi nition digital devices such as Blu-ray players. c SERV. U For use by ser vice personnel only. d SPDIF OUT Digital audio output to home theatres and other digital audio systems. e T V ANTENNA Signal input from an antenna, cable or satellite. VGA...

29 b Stereo audio output to headphones or earphones. c AUDIO L /R Audio input from analogue devices connected to VIDEO . d VIDEO Composite video input from analogue devices such as VCRs. e S -VIDEO S -Video (side) to be used with Audio L /R connectors for camcorder, game console, etc. When you use t...

30 • DVI-HDMI cable • HDMI cable and HDMI-DVI adaptor • VGA cable DVI LEFT / RIGHT HDMI 1/ DVI AUDIO IN : PC IN(AUDIO) For TV of size 26 inch and larger For TV of size 22 inch and smaller HDMI 2/ DVI / HDMI 2 VGA DVI / HDMI 2 LEFT / RIGHT HDMI 1/ DVI AUDIO IN : PC IN(AUDIO) For TV of size 26 inch an...

31 Enable or disable EasyLink Note Do not enable Philips EasyLink if you do not • intend to use it. 1 Press ( Home ). 2 Press to select [Setup] > [Installation] > [Preferences] > [EasyLink] . 3 Select [On] or [Off ] . Use one-touch play 1 Af ter enabling EasyLink , press play on your device...

32 Note You must map the audio input from the • connec ted device to your T V in order to use this feature. Enable remote control pass-through 1 Enable one-touch play and one-touch standby between easylink compliant devices by following the instructions in the previous section (see ‘Enable or disabl...

33 • [Dev. root menu] Accesses the root menu of the CD/DVD/game disc. • [Device setup menu] Accesses the main menu of the connected device such as DVD player, HDD recorder, or game console. • [Dev. content menu] Accesses the content menu of the CD/DVD/game disc. 4 Press OK to enter or activate your ...

34 Multimedia Suppor ted storage device: USB (Only • FAT or FAT 32 USB storage devices are suppor ted) Suppor ted multimedia fi le formats: • Images: JPEG • Audio: MP3 • Note Multimedia fi le names must not exceed 32 • char ac ter s. Tuner/Reception/Transmission Aerial input: 75ohm coaxial (IEC75) • T...

35 Supported TV mounts To mount the TV, purchase a Philips TV mount or a VESA-compatible TV mount. To prevent damage to cables and connectors, be sure to leave a clearance of at least 2.2 inches or 5.5cm from the back of the TV. Warning Follow all instr uc tions provided with the T V • mount. Konink...

36 TV channel issues Previously installed channels do not appear in the channel list: Check that the correct channel list is • selected. Picture issues The TV is on, but there is no picture: Check that the antenna is properly • connected to the T V.Check that the correct device is selected • as the ...

37 Computer connection issues The computer display on the TV is not stable: Check that your PC uses the suppor ted • resolution and refresh rate.Set the T V picture format to unscaled. • Contact us If you cannot resolve your problem, refer to the FAQs for this product at w w w.philips.com/suppor t. ...

38 digital services teletex t 10 , 14 display resolution 34 Dual view 18 E EasyLink disable 31 enable 31 one-touch play 31 one-touch standby 31 system audio control 31 , 31 Electronic Programme Guide environmental care 5 F factory settings 21 favourites list create list 14 view list 14 H HDMI troubl...