Philips 32PFL4902/F7 - Manuals

1 Notice Trademarks are the property of Koninklijke Philips N.V. or their respective owners.Funai Corporation reserves the right to change products at any time without being obliged to adjust earlier supplies accordingly. The material in this Owner’s manual is believed adequate for the intended use ...

Positioning the TV • Large screen TVs are heavy. 2 people are required to carry and handlea large screen TV. • Make sure to hold the upper and bottomframes of the unit firmly as illustrated. • Install the unit in a horizontal and stableposition. • Do not install the unit in direct sunlight or in apl...

Copyright All other registered and unregistered trademarks are the property of their respective owners. The terms HDMI and HDMI High- Definition Multimedia Interface, and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing Administrator, Inc. in the United States and other countr...

2 Getting started Features • DTV / Analog TV / CATV You can use your remote control to select channels which are broadcast in digital format andconventional analog format. Also, cable and satellite subscribers can access their TV channels. • Information display You can display on the TV screen the t...

Attaching the base You must attach the base to the unit to have it as a table top unit.Be sure the front and rear of the base match the proper direction. For largescreen TVs, at least 2 people are required for these steps. 1 Protect the plate with care 2 × 4 3 Note(s) • Make sure to use a table whic...

Remote control q r u ts p o b a c d g e h l m n j k f i (POWER) Turns the TV on from standby or off to standby. VUDU Access directly to VUDU. EasyLink buttons / : Searches backward or forward through the disc. . : Starts, pauses or resumes playback. . : Stops the disc playback. Note(s) • Pause may n...

Control panel f c d e a b Remote control sensor Receives IR signal from remote control. CH + / – Selects a channel. In the menu screen, moves the cursorup (+) / down (–). (POWER) Turns the TV on or switches the TV into standby mode. MENU Opens the main on-screen menu. SOURCE Selects connected device...

Connecting Antenna or Cable / Satellite /IPTV set-top box Be sure your antenna or another device is connected properly beforeplugging in the AC power cord. If connecting to an antenna through an RF cable Any DTV programs that are broadcast in your area can be received forfree through an antenna conn...

No supplied cables are used with these connections: • Please purchase the necessary cables at your local store. B Before you connect the AC power cord: Be sure other devices are connected properly before plugging in the ACpower cord. Selecting your connection quality HDMI - Highest quality Supports ...

Connecting the TV to the internet using a wireless LAN WLAN LAN Network provisioning equipment Ethernet cable Broadband router Broadband router Broadband router Internet Internet Internet Note(s) • After you make the wireless connection, set up the necessary network settings. Connect to network p. 3...

The following PC-input video signals can be displayed: Format Resolution Refresh rate VGA 640 x 480 60Hz SVGA 800 x 600 XGA 1,024 x 768 WXGA 1,280 x 768 1,360 x 768 FHD 1,920 x 1,080 24/30/60Hz Other formats or non-standard signals will not be displayed correctly. Note(s) • Please purchase a HDMI-DV...

These operations are accessible by remote control. Some may also be accessible by the main unit's control panel. Initial setup This section will guide you through the unit’s Initial setting which includesselecting a language for your on-screen menu, country, location andAutoprogram, which automatica...

3 Use your TV Switching on your TV and putting it instandby mode Remote control TV To turn the TV on from standby or off to standby • Press on the TV or the remote control. Note(s) • Energy consumption contributes to air and water pollution. When the AC power cord is pluggedin, your TV consumes ener...

Watching channels from an externaldevice Switching each input mode can easily switch with the remote controlbetween TV and external devices when they are connected to the unit. 1 Turn on the set-top box or the connected device. Press SOURCE and use to select the set-top box or the connected device a...

Create a list of favorite channels You can create lists of your preferred TV channels so that you can findthose channels easily. 1 Press OK while viewing a TV program. 2 Use to select the desired channel, then press yellow button. 3 Use to select the desired favorite list ( Favorites 1 - Favorites 4...

For 4:3 video signal Wide screen Movie expand 16:9 Movie expand 14:9 4:3 Super zoom Automatic Automatic Other than DTV and HDMI connected devices,enlarges the picture to best fit the screen.DTV and HDMI connected devices display thepicture at its original size. The subtitles may remainvisible. Super...

Using options menu You can access to some TV settings directly by using OPTIONS . 1 Press OPTIONS to display options menu, then press OK . 2 Use to select a desired setting, then press OK . a b c d Options Options Following settings can be configured. Voice guide toggle To set Voice guide on or off....

USB Your TV is fitted with a USB connection that enables you to view photos,listen to music or watch video files stored on a USB memory stick. 1 Press SOURCE and use to select USB , then press OK . 2 Use to select the desired file, then press OK . USB DISK 2016_12_24 folder_A folder_B folder_C Photo...

Playing movies 1 Use to select Movie , then press OK . 2 Use to select the desired item, then press OK . 3 Press OK or . to play the selected files. • Press OK or . to pause, then press OK or . again to resume. • Press to fast-forward search. • Press to fast-backward search. • Press . to stop playba...

Picture and sound setup B Before you begin: You must set Home in Location . p. 32 Otherwise, personalized picture and sound settings will not bememorized after the unit goes into standby mode. 1 Press and use to select Setup then press OK . 2 Use to select Picture and sound setup , then press OK . 3...

Sound B Before you begin: You must set Home in Location . p. 32 Otherwise, personalized picture and sound settings will not bememorized after the unit goes into standby mode. 1 Press and use to select Setup then press OK . 2 Use to select TV settings , then press OK . 3 Use to select Sound , then pr...

Features 1 Press and use to select Setup then press OK . 2 Use to select TV settings , then press OK . 3 Use to select Features , then press OK . Sleeptimer Installation Features Sound Picture Accessibility 4 Adjust the following items. Sleeptimer Sleep timer can set the unit to go into standby mode...

Preferences You can set the unit to reduce the power consumption or adjust thebacklight brightness in Location setting. EasyLink allows you to operate your connected EasyLink device. S Setting your location to home Choosing Home gives you full flexibility to change predefined settings for picture an...

Set the Master EasyLink to On or Off . The following additional settings will be grayed out when you set them to Off . Master EasyLink Off Disables all EasyLink. On Selects if you have connected anexternal device that is compatible withthe EasyLink function. This unit will turn on when the power on ...

Caption settings Closed captions displays the audio portion of the program assuperimposed text over the video. 1 Use to select Caption settings , then press OK . CC w/ mute On Off Digital caption options Digital caption service Caption service Closed captions Digital audio preferences Caption settin...

Digital audio preferences You can set the interpretive broadcasting by an audio explanation. 1 Use to select Digital audio preferences , then press OK . Primary audio selection criteria Audio language Audio accessibility Digital audio preferences Caption settings Voice guide Audio accessibility To p...

Child lock You can prevent your children from watching certain programs or certainchannels by locking the TV controls and by using ratings. 1 Use to select Child lock , then press OK . Mono/Stereo Digital audio language Change PIN Child lock Channel installation Region ratings lock Canadian French r...

US TV ratings Sub rating TV-Y7 Fantasy Violence TV-PG ViolenceSexLanguageDialog TV-14 TV-MA ViolenceSexLanguage Note(s) • Blocked sub rating's will appear beside the main rating category in TV ratings lock menu. • You cannot block a sub rating if the main rating is set to . • Changing the category t...

Connect to network Setup network connection settings in order to use Net TV or networkupgrade functions. • The meanings of abbreviations are defined as below. AP : Wireless LAN access point SSID : Wireless network name • The key entry screen will appear when you select SSID, WEP /others or proxy add...

Network settings 1 Press and use to select Setup , then press OK . 2 Use to select Network settings , then press OK . 3 Adjust the following items. Manual network settings 1 Use to select Manual network settings , then press OK . Proxy configuration IP configuration Wireless network setting Network ...

Manually enter your SSID Set up the connection to the AP (e.g. wireless router) manually by enteringthe SSID. 3 Use to select Manually enter your SSID , then press OK . • AP (e.g. wireless router) SSID entry screen will appear. Enter the SSID using , then press OK . 4 Use to select the authenticatio...

P Proxy configuration 2 Use to select Proxy configuration , then press OK . 3 Use to select a setting, then press OK . Do not use Proxy setting Proxy configuration IP configuration Wireless network setting Network selection Use Proxy port Proxy address • Do not use is selected for default settings. ...

Home network You can turn your TV into a Digital Media Renderer (DMR), which can playvideo, music and photo files stored on certified home media serversconnected to your home network. 1 Use to select Home network , then press OK . 2 Use to select the item you want to adjust, then press OK . Renderer...

Update software Philips continuously tries to improve its products and we stronglyrecommend that you upgrade the TV software when upgrades areavailable. New software can be downloaded from our website at www.philips.com/support using the model number of your TV to find information. You can update th...

Network updates You can update the software by connecting the unit to the internet. 1 Press and use to select Setup , then press OK . 2 Use to select Update software , then press OK . 3 Use to select Network , then press OK . 4 Use to select Yes , then press OK . • This unit will then start checking...

View photos, play music and watch videosusing home network On your TV you can play video, music and photo files stored on homenetwork certified home media servers connected to your home network.In order to use this feature, you must connect this unit to the internet. It is recommended that files to ...

Watch videos using home network 1 Press to select a file or a folder. 2 Press OK or . to play the selected files. • Press OK or . to pause, press OK or . again to resume. • Press / to fast-forward search. • Press 0 to fast-backward search. • Press . to stop playback. • Press . to resume from the poi...

My Apps functions Remove App 1 Use to select the desired App, then press OPTIONS . 2 Use to select Remove App , then press OK . • The selected App will be removed from My Apps list. Move App 1 Use to select the desired App, then press OPTIONS . 2 Use to select Move App , then press OK . • The select...

Creating a new station By entering your favorite artists or tracks, Pandora selects music andcreates a new station for you on the basis of the entered information. 1 On the station list screen, Use to select New Station , then press OK . 2 Enter a name of your favorite artist or tracks, then press O...

5 Useful tips FAQ Question Answer My remote control does notwork.What should I do? • Check the antenna or cable connection to the main unit. • Check the batteries on the remote control. • Check if there is an obstacle between the infrared sensor window and the remote control. • Test the IR signal ou...

Troubleshooting tips If the unit does not perform properly when operated as instructed in this manual, P Please check the following Troubleshooting tips and all connections once before calling for service. Power No power • Make sure the AC power cord is plugged in. • Make sure that the AC outlet sup...

6 Information Glossary Analog TV (NTSC) Acronym that stands for National Television Systems Committee and thename of analog broadcasting standards.Off the air analog TV signals are no longer being sent by major broadcastingstations in the USA. ARC (Audio Return Channel) (HDMI 2 only) HDMI-ARC allows...

7 Specifications 32PFL4902 31.5”/ 16:9 178° (V) by 178° (H) ATSC (digital) / NTSC (analog) Mono, Stereo, Sonic Emotion Premium 8W x 2 5 Band Automatic / Super zoom / 4:3 / Movie expand 14:9 / Movie expand 16:9 / Wide screen Automatic / 4:3 / Wide screen / Unscaled or Full JPEG, Progressive JPEG MP3,...

8 Warranty This warranty gives you specific legal rights. You may have other rights which vary from state/province to state/province. Funai Service Corporation, 2425 Spiegel Drive, Groveport, OH 43125, USA Limited warranty one (1) year Warranty coverage : This warranty obligation is limited to the t...

License Funai Corporation, Inc. hereby offers to deliver, upon request, a copy of the complete corresponding source code for the copyrighted open source code packages, on an “AS IS” basis, used in this product for whichsuch offer is requested by the respective licenses. This offer is valid up tothre...