Philips 21PT4439/94 - Manuals

Page 3 - Important; Safety

Risk of injury or damage to the TV! Two people are required to lift and carry • a TV that weighs more than 25 kg. If the TV is transpor ted in temperatures • below 5°C, unpack the TV and wait until the TV temperature matches room temperature before connecting the TV to the power outlet. Before you c...

Page 5 - Your product; Product overview; Remote control

a (Standby-On) Switches the TV to standby if it is on. • Switches on the TV if it is in standby. • b Not used. c INFO Displays programme information, if available. d Not used. e INCR. SURR (Used only in some models) Enables Incredible Surround for stereo sources. Enables spatial mode for mono source...

Page 6 - Side connectors; Controls and indicators; Back connectors

c CVI Video input from analogue devices such as DVD, receiver, game console, etc. This connector is used with audio input. d TV ANTENNA Signal input from an antenna, cable or satellite. Side connectors a VIDEO IN Composite video input from analogue devices such as VCRs. b AUDIO IN L/R Audio input fr...

Page 7 - Insert remote control; Get started; Connect devices

Connect a video recorder: Connect a video recorder and a set-top box: Insert remote control batteries AV out AV in CVI VIDEO L/Mono AUDIO R VCR with Video and Audio input sockets AV sockets on the rear of the TV AV out AV in CVI ANT VCR with Video and Audio output sockets Set top box Sockets on the ...

Page 8 - Select the colour and sound; Install channels; Automatically install channels; Manually install channels

Skip channels1 Press MENU . 2 Select [INSTALL] > [MANUAL STORE] > [SKIP] . 3 Select [ON] to skip channel. 4 Press INFO to exit. Swap channels1 Press MENU . 2 Select [INSTALL] > [CHANNEL SWAP] > [FROM] . 3 Select or the numeric buttons to enter the channel number. 4 Press to select [To] ....

Page 9 - Use the source button; Adjust TV volume; Use your; Switch your TV on/off or to

Switch channels Press • CH +/- on the remote control or / at the front of the TV. Enter a channel number using the • Numeric buttons . Watch connected devices Use the source button Press AV repeatedly to cycle through the various sources. Adjust TV volume To increase or decrease volume Press • VOL +...

Page 10 - Use smart picture; Manually adjust picture settings; Use more of; Access TV menus; Change picture and sound

Use smart picture Use smar t picture to apply pre-defined picture settings. 1 Press SMART repeatedly to cycle through the four settings. • [PERSONAL] Settings are set to your preference. • [SOFT] Emphasises warm colours. This setting is suitable for watching TV programmes in dimly lit rooms. • [NATU...

Page 11 - Use timers; Set the time; Adjust sound settings

Use timers You can set timers to switch the TV to standby at a specified time. Set the time 1 Press MENU . 2 Select [FEATURES] > [TIMER] > [CLOCK] . 3 Press to set the hour and press to confirm. 4 Press to set the minutes and press to confirm. 5 Press MENU to exit. Set timer options 1 Press ME...

Page 12 - Sound issues; Troubleshooting; General TV issues

try to improve the reception quality by changing the antenna direction or moving devices away from the TV. If reception on only one channel is poor, • fine tune this channel. There is poor picture quality from connected devices: Check that the devices are connected • properly. Check that the picture...

Page 13 - Picture

8 Product information Product information is subject to change without notice. For detailed product information, go to www.philips.com/suppor t. Picture Diagonal screen size: 54 cm Visible diagonal screen size: 51cm Tuner/Reception/ Transmission Antenna input: 75 ohm coaxial • TV system: PAL, BG • V...

Page 14 - Notice

Compliance with EMF Koninklijke Philips Electronics N.V. manufactures and sells many products targeted at consumers which, like any electronic apparatus, in general have the ability to emit and receive electromagnetic signals. One of Philips’ leading Business Principles is to take all necessar y hea...